Mgr8700dso Parts

Burners won't light or spark intermittently? This wire harness restores electrical connections between the igniter switch and ignition system.

This spark module supplies the high-voltage pulses that ignite the surface burners on a gas cooktop or range. Replacing a failing module helps restore consistent clicking and spark so burners light promptly and reliably.

• Supplies high-voltage to up to five surface igniters (5+0 configuration)
• Sends spark when a burner control is turned to Lite
• Failure symptoms can include no spark on all or multiple burners
• May also cause intermittent/weak spark or continuous clicking

• Disconnect power and shut off gas before servicing
• Note wire locations; move one connector at a time to matching terminals
• Mount securely in the original position and ensure proper grounding
• After replacement, if only one burner won't ignite, inspect that burner's switch and igniter

The Orifice Holder is an OEM part for Whirlpool ranges. This part secures the orifice through which gas flows into the range cooktop and oven burners.

Causes may include natural wear, cracks or damage incurred over years of use. Gas leaks are also a risk if the holder fails.

Symptoms of a bad orifice holder can manifest as:

• Unpredictable or intermittent burner ignition
• Flames that appear abnormally tall, yellow or noisy
• Cooktop that heats unevenly or inadequately

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

Replace a damaged orifice holder if burners won't ignite properly or flames are uneven. Remove grates and burner heads, lift cooktop to access. Moderate difficulty.

The HOLDER-ORFICE is an OEM component specifically designed for Whirlpool brand gas ranges and cooktops. It serves as the mounting bracket that secures the gas orifice fitting in the proper position. Correct orifice placement is critical for targeted gas flow and optimal flame adjustment.

Symptoms of a bad holder-orifice include: 

• Flames that cannot be properly adjusted and controlled from high to low 
• Potential safety hazards such as gas leaks due to a loose fitting
• Inefficient or uneven heating from erratic gas flow issues

Causes of failure include normal wear over time exposed to heat and vibration, or damage from accidental impact that warps the holder.

This OEM Whirlpool replacement ensures the orifice fitting remains firmly in position. Compatible with additional brands like Maytag, KitchenAid, Jenn-Air, Amana, and select Kenmore models. Replace your holder orifice today for safe, dependable gas range functionality.

Replacement holder retainer for gas ranges. Secures small components in place. Replace if broken, cracked, or missing to restore proper fit.

Fix weak or uneven flames on your gas range surface burner with this orifice holder. Secures gas orifice for proper flow and consistent ignition.

This replacement fitting secures and directs the appliance water line to the internal plumbing, restoring a proper water connection and preventing leaks. Use it when the original connector is cracked, loose, or leaking. What it does:

• Connects the external water supply tubing to the appliance's internal water system
• Provides a sealed transition point to prevent drips or steady leaks
• Replaces damaged, corroded, or worn fittings that cause low/no water flow or leaks
• Helps restore reliable water delivery for ice makers, dispensers, or inlet assemblies

• Turn off the water supply and unplug the appliance before starting work
• Depressurize the line by running the dispenser briefly after shutting off water
• Use proper tubing size and seat fittings fully; inspect O-rings or ferrules and replace if needed

Heat-resistant fiberglass insulation that lines the oven cavity walls and backsplash panels. Replace if cracked, compressed, or missing for safety.

Secures the front panel to the cabinet on your range. Replace this bracket if it's cracked, bent, or missing to restore proper alignment and stability.

This left-side slide drawer replaces a worn or damaged refrigerator drawer slide to restore smooth, stable opening and reliable support for the drawer. Designed to match the OEM fit and function for compatible Whirlpool refrigerators. What it does:

• Guides and supports the left refrigerator drawer for even, smooth movement.
• Replaces bent, broken or worn left-side slide assemblies to stop sagging or sticking.
• Reduces rubbing, scraping or catching when opening and closing the drawer.
• Helps restore proper drawer alignment and prevents uneven wear on the drawer edge.

• Disconnect power to the appliance before beginning repairs and remove food/items from the drawer.
• Remove the old slide per the freezer/refrigerator drawer removal steps; retain fasteners if re-using.
• Align the new slide with mounting points and secure with recommended screws; avoid over-tightening.
• Test drawer movement and adjust alignment as needed; stop and reassess if binding occurs.

Cable retainer strap for electric and gas ranges. Secures wiring harnesses in place. Replace if cracked, broken, or missing to properly hold cables.

Metal heat shield that protects range components from direct heat damage. Installs near oven cavity. Replace when original is warped, cracked, or missing.

Support bracket for ranges. Provides structural support for internal components. Replace if cracked, bent, broken, or missing to restore stability.