Mgs6870adq Parts

This end cap panel is a replacement trim piece that restores the finished edge and protects the appliance cabinet where panels meet. It helps maintain a clean look and keeps edges covered after repair or panel replacement. What it does

• Covers and protects the outer edge of a cabinet or control panel section to prevent exposed edges and wear
• Restores a flush, finished appearance after removing or replacing surrounding panels
• Helps keep dirt and moisture from reaching internal edges and seams
• Matches OEM fit and attachment points for reliable alignment

• One end cap panel

• Designed to snap or screw into existing mounting points — handle gently to avoid cracking plastic
• Turn off and unplug the appliance before removing nearby panels
• Inspect adjacent clips or fasteners and replace if damaged to ensure secure fit
• No special tools typically required; a screwdriver and trim tool may be helpful

This front mounting bracket secures the appliance's front panel and helps keep the cabinet and components aligned for stable operation. A direct-fit replacement that restores proper panel fit and reduces vibration or rattling. What it does

• Secures the front panel or trim to the cabinet to maintain alignment and prevent gaps.
• Keeps adjacent components from shifting, helping reduce vibration and noise.
• Commonly replaces cracked, bent, or missing brackets that cause loose or misaligned panels.
• Helps restore correct door/panel fit and smooth operation of attached controls or trim.

• One front mounting bracket

• Disconnect power (and water if applicable) before starting any repair.
• Access may require removing the front panel or trim—keep screws and fasteners organized.
• Inspect mating surfaces and existing fasteners; replace any damaged screws or clips.

This mounting bracket secures appliance components to the cabinet or chassis, restoring proper alignment and support. Designed to replace damaged or missing brackets, it helps reduce vibration and prevent parts from shifting during use. What it does

• Provides a stable anchor point for internal components or panels
• Restores proper alignment and fit between the appliance cabinet and mounted parts
• Helps reduce vibration and rattling caused by loose or broken supports
• Commonly replaced when bracket is bent, cracked, or missing

• Inspect adjacent fasteners and mounting holes; replace any stripped screws or damaged hardware
• Use appropriate tools and mounting hardware for secure installation; torque to OEM recommendation if available
• Disconnect power before working on electrical appliances and follow all safety guidelines

This orifice spud is the small gas fitting that directs fuel from the range/oven valve to the burner, helping maintain the correct gas flow for stable ignition and consistent flame control. What it does

• Seats in the gas valve or burner assembly to channel gas through the proper orifice
• Restores correct fuel flow when a damaged or clogged spud causes weak or no flame
• Helps correct symptoms like burners that won't light, low or uneven flame, or inconsistent cooking heat
• Works with the existing valve and burner components to re-establish reliable ignition

• One orifice spud

• Turn off the appliance gas supply and disconnect power before starting any work
• Remove grates and burner parts to access the valve/burner area; keep parts organized for reassembly
• Tighten to OEM torque; do not force fittings or overtighten threads

This replacement manifold assembly routes fluid or gas from the supply to the appliance's internal components, restoring proper distribution and operation. Use this genuine-style manifold when the original is cracked or otherwise failing. What it does

• Directs flow from the supply line to multiple component ports so burners, valves, or injectors receive proper flow.
• Restores proper operation when improper flow causes uneven performance or loss of function.
• Common symptom indicators: weak or no output at related components, visible leaks, or inconsistent operation.
• Works as the central distribution point that mates to supply and downstream lines or valves.

• One manifold assembly as shown

• Turn off and disconnect the appliance from power and the supply (gas/water/electric) before starting.
• Inspect associated seals, gaskets, and fittings; replace any worn items to ensure a proper seal.
• Hand-tighten fittings first, then torque per manufacturer spec if available; avoid overtightening.

The LP Orifice is an OEM part for Whirlpool gas ranges. As a calibrated opening, it helps regulate gas flow to the broiler burner, ensuring proper and safe operation.  

Causes of a bad orifice can include mineral or foreign debris deposits that obstruct gas flow or physical damage to the orifice opening.

Symptoms of a bad LP orifice include:  

• Yellow lazy flames or flames that do not fully ignite under the broiler  
• Inefficient or inadequate broiling performance
• Strong gas smell coming from the range

Note: This is a "Male" broil orifice with #100 stamped on it.

This Whirlpool replacement part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. Proper calibration of gas pressure is critical for safety, so replacement with an exact OEM match is highly recommended.

This left-side slide drawer replaces a worn or damaged refrigerator drawer slide to restore smooth, stable opening and reliable support for the drawer. Designed to match the OEM fit and function for compatible Whirlpool refrigerators. What it does:

• Guides and supports the left refrigerator drawer for even, smooth movement.
• Replaces bent, broken or worn left-side slide assemblies to stop sagging or sticking.
• Reduces rubbing, scraping or catching when opening and closing the drawer.
• Helps restore proper drawer alignment and prevents uneven wear on the drawer edge.

• Disconnect power to the appliance before beginning repairs and remove food/items from the drawer.
• Remove the old slide per the freezer/refrigerator drawer removal steps; retain fasteners if re-using.
• Align the new slide with mounting points and secure with recommended screws; avoid over-tightening.
• Test drawer movement and adjust alignment as needed; stop and reassess if binding occurs.

This mounting bracket secures internal or external appliance components to the cabinet, restoring proper alignment and preventing vibration. It's a small but critical metal support used where fasteners attach panels or assemblies. What it does:

• Provides a secure attachment point for panels, controls, or assemblies
• Prevents loosening, rattling, and misalignment caused by broken or missing supports
• Restores proper fit and function when original bracket is bent, cracked, or missing
• Works as a direct replacement using existing fasteners and mounting holes

• Disconnect power (and gas if applicable) before beginning any repair
• Installation typically requires basic hand tools (screwdriver, nut driver, or socket)
• Retain or reuse original screws; verify bracket orientation before tightening
• If metal edges are sharp, use care and protective gloves to avoid cuts

This replacement Holder (ORF) secures the ORF mounting/trim assembly so the component stays in the correct position and prevents rattling or shifting during normal use. It restores proper fit and stability where the original holder is broken or missing. What it does:

• Secures the ORF assembly or trim piece to the appliance frame
• Stops movement, rattling, or misalignment caused by a damaged holder
• Helps maintain proper spacing and fit of the surrounding parts
• Supports normal operation by keeping the ORF component in place

• Disconnect power or unplug the appliance before beginning any work
• Removal and reinstallation typically require basic hand tools; handle trim gently to avoid scratching
• Follow the OEM instructions for disassembly and reassembly