Mhe450wr01 Parts

This smoke filter is a charcoal-style recirculating filter that helps reduce cooking smoke and odors when your range hood is set to recirculate. It provides a quick, no-fuss way to refresh kitchen air without ducting. What it does:

• Adsorbs and helps reduce cooking odors and smoke particles in recirculating hood mode
• Restores odor-control performance when the original filter is saturated or aged
• Helps maintain a fresher kitchen environment during frying, grilling, and high-smoke cooking
• Compatible with hoods that use replaceable charcoal/smoke filters (verify fit for your model)

• One smoke (charcoal) recirculating range hood filter

• Follow your appliance manual for access and replacement instructions
• Typically installs by sliding or snapping into the hood filter slot; no tools required for most hoods
• Replace when odors persist or per the manufacturer's recommended interval
• Dispose of used charcoal filter per local regulations

Screw that secures appliance panels and components to restore proper fit and reduce movement. Use this direct-replacement fastener to swap out stripped, missing, or damaged screws that cause loose panels or rattling. What it does:

• Secures panels, trim, brackets, and internal components to maintain alignment and prevent vibration.
• Replaces stripped, corroded, bent, or missing screws that can cause rattling, gaps, or loose parts.
• Restores proper fit and function of assemblies when original fasteners fail.
• Small part — confirm size and thread match your appliance before ordering.

• Disconnect power (and water, if applicable) before starting any repair.
• Use the correct screwdriver or bit; avoid overtightening to prevent stripping or cracking.
• Replace all like fasteners in the same area if multiple are damaged to ensure even fit and alignment.

A replacement 3/8-16 nut that secures fasteners and assemblies on compatible Whirlpool appliances. Restores proper fastening so panels, brackets and components stay tight and aligned during normal operation. What it does:

• Fastens and secures bolts, studs or threaded shafts in appliance assemblies.
• Prevents loose connections that can cause rattling, vibration or misalignment.
• Used where a 3/8-16 threaded nut is required for structural or mounting applications.
• Replaces missing, stripped or corroded nuts to restore reliable mechanical connection.

• Disconnect power and follow all appliance safety procedures before servicing.
• Inspect mating threads and remove debris; replace if threads are damaged.
• Thread onto bolt or stud by hand first, then snug with the correct wrench; avoid overtightening.
• Follow the appliance manufacturer's torque and assembly instructions.

This heater sub-assembly replaces the dryer heating element assembly to restore normal drying performance by generating the hot air needed for effective clothes drying. Designed to match the original equipment fit and function. What it does:

• Heats incoming air so the dryer can remove moisture from clothes
• Helps return normal drying times when the dryer is not producing heat or takes multiple cycles to dry
• Works with the dryer's airflow and thermostatic controls to maintain operating temperature
• Reduces risk of repeated cycles caused by insufficient heating

• One heater sub-assembly as shown

• Disconnect power (unplug or shut off circuit breaker) before starting any repair
• Allow the appliance to cool completely and work in a well-lit area
• Handle heating element carefully to avoid bending or damaging the assembly

Size: 2.8 fl.oz tube. 748 non-corosive sealant.

The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.  

Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.

Symptoms of a bad mounting screw include:

• Loose or rattling switch within the console face  
• Difficulty selecting cycles as buttons wobble out of place
• Water intrusion hastening corrosion of electrical terminals
• Potential shock hazards if live connections are exposed

This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This terminal block provides the electrical connection point between the washer's power cord and the appliance wiring, restoring a secure, stable supply for safe operation. It replaces a damaged or corroded connection assembly. What it does

• Secures and insulates power cord wires where they enter the washer to prevent loose connections and arcing
• Restores reliable incoming power when a burned, loose, or broken terminal causes intermittent power or no power
• Helps prevent electrical resistance and heat buildup at the cord connection
• Matches OEM mounting and terminal layout for a direct replacement

• One terminal block assembly as shown

• Disconnect the washer from power before servicing to avoid shock or injury
• Inspect wire colors and terminal positions, then transfer wires to the same terminals on the replacement part
• Typical installation requires basic hand tools (screwdriver, nut driver); some models may need partial cabinet access
• If you see melted insulation or other wiring damage, replace affected wiring.

A single mounting screw designed to secure panels, brackets, or components on your appliance for reliable fit and reduced vibration. Use this genuine replacement when a fastener is missing, stripped, or rusted. What it does:

• Fastens panels, trim, or mounting brackets to restore proper alignment
• Helps eliminate rattling or vibration caused by loose or missing screws
• Replaces corroded or damaged hardware to maintain safe operation
• Restores secure attachment for parts that no longer hold in place

• Disconnect power to the appliance before starting any repair
• Use the correct driver bit to avoid stripping the screw head
• Tighten until snug; avoid overtightening which can strip threads or damage parts

This magnetron generates the microwave energy that heats food in a microwave oven. Replacing a failed magnetron restores normal cooking power and stops weak or no-heat performance. What it does:

• Converts high-voltage power into microwave radiation to heat food
• Restores full heating when poor or no heating is caused by a failed magnetron
• Addresses symptoms such as weak heating, no heating, or unusual humming/buzzing during operation
• Not a control board or transformer—this part is the microwave source component

• One magnetron (single unit)

• Disconnect power before servicing; microwave high-voltage components can hold a dangerous charge
• Handle the antenna/ceramic output carefully to avoid damage; inspect seals and waveguide components during replacement
• After installation, verify proper operation and safety features before normal use

A replacement mounting screw used to secure appliance panels and components. This OEM-style screw helps restore proper fit and reduces rattling or loose parts for a finished, secure assembly. What it does:

• Fastens control panels, brackets, or interior trim to the appliance frame
• Restores proper alignment when an original screw is missing or stripped
• Stops rattling or vibration caused by loose fasteners
• Matches OEM fit for reliable fastening when the correct screw is used

• Turn power off at the breaker before servicing electrical appliances
• Match screw length, head style and thread to the removed fastener before installation
• Use the correct screwdriver or bit to avoid cam-out or head damage
• Do not overtighten; snug until secure to avoid stripping threads or cracking components

This 10-32 x 3/8 machine screw secures panels and components in many appliances where a small, threaded fastener is required. It replaces stripped, missing, or loose screws to restore stable assembly and reduce vibration. What it does:

• Fastens panels, brackets, and small components using 10-32 unified threads
• Restores secure mounting when screws are missing, stripped, or loose
• Helps stop rattling, misalignment, and intermittent part contact caused by loose fasteners
• Works wherever a 10-32 x 3/8 machine screw is specified by the manufacturer

• Disconnect power or unplug the appliance before servicing
• Use the correct size screwdriver or nut driver to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Replace with the same size and thread spec to ensure proper fit and function