Mim1555yrs Parts

This key switch is the user-operated electrical switch that lets the appliance's control receive power and start selected functions. It replaces a worn or failed switch to restore reliable on/off control. What it does:

• Provides a user-operated on/off control for the appliance's control circuitry
• Restores power flow to the control when the switch is turned to the ON position
• Fixes symptoms such as the appliance not starting, intermittent power to controls, or unresponsive front-panel operation
• Operates as the interface between the user key and internal electrical contacts

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Installation typically requires removing the control panel or console; keep fasteners and small parts organized
• Handle electrical connectors carefully; verify secure connections before reassembly

The  Drain Pump Assembly is an OEM part for Whirlpool ice machines. It removes melted water from the harvest and storage bin to allow continuous ice production. This pump assembly contains the electric drain pump motor and impeller which work together to discharge drain water through the outlet hose.

Causes of a bad drain pump assembly can include wear due to heavy use over time, a buildup of mineral deposits or other debris clogging the impeller, or failure of the motor itself.

Symptoms of a bad drain pump assembly include:

• Standing water in the storage bin
• Inability to harvest or store ice
• Strange noises or vibrations coming from the pump area
• Leaks from around the pump housing

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This condenser fan blade moves air across the refrigerator's condenser coil and compressor to remove heat, helping the unit cool efficiently. Replace a cracked, warped, or loose blade to restore proper airflow and reduce noise.

• Circulates air through the condenser section to dissipate heat from the refrigerant
• Supports stable fridge and freezer temperatures and efficient compressor operation
• Common symptoms: rattling/scraping noises, weak or no airflow at the rear/bottom, longer run times, or warming compartments
• Replace if the blade is cracked, warped, wobbling, or loose on the motor shaft

• Disconnect power and pull the refrigerator away from the wall; remove the rear access panel to reach the condenser fan
• Note the original blade orientation/rotation; remove the old blade from the motor shaft (release any retainer if present)
• Press the new blade onto the shaft until fully seated; ensure it spins freely with proper clearance and airflow direction
• Reinstall the panel, restore power, and verify normal airflow and sound

This replacement water line hose restores a secure water connection to your appliance, helping stop leaks and restore proper dispenser or ice maker water flow. Designed to match factory fit and routing for an exact replacement. What it does

• Carries water between the household water supply and the appliance water inlet or dispenser.
• Restores normal water flow to the ice maker or dispenser when a damaged hose is causing low or no water delivery.
• Prevents leaks and pooling when the original hose is cracked, split, or worn.
• Provides a flexible, durable connection that resists kinking when installed correctly.

• One replacement water line hose.

• Turn off the water supply and unplug the appliance before starting; relieve any residual water pressure by operating the dispenser briefly.
• Inspect fittings and valves for wear; replace clamps or gaskets if they show damage to ensure a watertight seal.
• After installation, turn the water back on slowly, check all connections for leaks, and run the dispenser/ice maker to verify proper flow.

This key switch is the user-accessible on/off control that lets you enable or disable the appliance function tied to the Model 50 control. It replaces a worn, broken, or unresponsive selector to restore normal operation. What it does:

• Provides the mechanical on/off or mode-selection action for the Model 50 control
• Replaces a cracked, stuck, or non-clicking key switch that won't engage
• Restores reliable electrical contact so the control responds when the key is turned
• Used when the control panel switch is physically damaged or intermittent

• Disconnect power (unplug or turn off breaker) before starting any repair
• Access may require removing the control panel or console—keep fasteners organized
• Note wire positions or take a photo before disconnecting harnesses to ensure correct reassembly

Size: 8-32 x 1/2 inch.

This wire harness connects the ice maker's cutter grid to the appliance's electrical system, supplying power so the heated grid can slice the ice slab into cubes. Replacing a damaged harness helps restore consistent cube separation and production.

• Routes electrical power to the cutter grid/heating wires
• A failed, loose, or heat-damaged harness may prevent the grid from warming
• Common symptoms may include whole sheets or large chunks in the bin, cubes not separating, or intermittent/slow ice production
• Visual signs can include melted/discolored grid connectors or broken/brittle conductors

• Disconnect power before servicing; allow the cutter grid to cool completely
• Note wiring/connector orientation; transfer one connection at a time to match original routing
• Seat connectors fully and secure the harness in original clips/standoffs away from sharp edges
• After reassembly, restore power and verify the cutter grid warms during a cycle