Mle 2000 Ayw Parts

This snap-in, plunger-style door switch detects when the appliance door opens or closes so the control can respond as designed—typically turning the interior light on or off and managing door-dependent functions. What it does:

• Senses door open/closed position and signals the appliance
• Toggles the interior light on and off with door movement
• Enables or pauses door-dependent features (fan, dispenser, alarms) on select models
• Common symptoms of a failed switch: light stuck on or off, door-ajar alerts, or features that only work with the door closed/open stop working

• 1 door switch

• Disconnect power before servicing
• The switch mounts in a rectangular opening near the door frame; release locking tabs and pull the old switch out
• Move wires to the new switch one at a time to maintain correct terminal positions
• Snap the new switch fully into place, restore power, and test door-activated functions

This tub displacement switch monitors water level/pressure to help the washer detect tub fill and balance, reducing overfill and load sensing errors. It replaces a worn or faulty unit to restore reliable fill and balance sensing. What it does:

• Senses tub water displacement/pressure changes so the washer can detect correct fill and load balance
• Helps prevent overfilling and supports proper spin cycles by reporting tub condition to the control
• Commonly replaced when washer overfills, won't start spin, or shows erratic fill behavior

• Disconnect power before accessing internal components to avoid shock
• Mounts to the washer chassis with electrical connector and vacuum/pressure hose; reuse existing hose if undamaged
• Verify hose and fittings are intact and free of blockages before installation

This guard hose is a molded protective sleeve that shields appliance hoses from abrasion and wear, helping keep water lines routed safely and reducing the risk of chafing-related leaks. What it does:

• Protects a water or drain hose from rubbing, abrasion and sharp edges
• Helps maintain proper hose routing to reduce kinks and stress at fittings
• Minimizes wear that can lead to leaking or premature hose failure
• Supports a more reliable seal by reducing hose movement at connection points

• Disconnect power and shut off the water supply before beginning work
• Slide guard over the hose as shown in the OEM diagram
• Use basic hand tools; avoid sharp bending or cutting the guard during install
• Replace any hoses or clamps that show signs of damage or corrosion

This is a gas valve assembly designed to be used on gas dryers. This is the part that controls the gas supply for the burner assembly and heats the dryer.When this part has failed, the dryer may not start at all or may experience operational issues. If there is restricted airflow, it can cause the gas valve solenoids to fail. Check to make sure the air can flow freely. If the igniter is glowing red but still doesn't ignite the burner assembly, then the gas valve assembly will need to be replaced. It's important to disconnect the dryer from its power source and turn off the gas before starting this replacement process. The person performing the replacement may wish to wear work gloves to protect their hands during this procedure.This genuine OEM part is sold individually and is sourced directly from the manufacturer. This gas valve assembly is compatible with gas dryers that are manufactured by Whirlpool, International, and Maytag.

This electronic control board regulates the appliance's functions and user controls so the unit runs cycles and displays status correctly. Replaces a failed control board to restore normal appliance operation and control responsiveness. What it does:

• Manages timing, cycle selection, and user interface commands for the appliance
• Communicates with sensors and actuators to start and stop cycles
• Can resolve symptoms like unresponsive controls, incorrect cycle operation, or error codes tied to the main control
• Works as the central logic module coordinating other control components

• One electronic control board

• Disconnect power before servicing to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use an anti-static strap if available
• Verify cabinet access panels and connectors match before installing the replacement

A replacement cycling thermostat that helps regulate dryer temperature and prevent overheating by cycling the heater on and off as needed. Restores temperature control for safer, more consistent drying. What it does

• Opens and closes to cycle the heating element, maintaining proper operating temperature.
• Helps prevent excessive heat build-up that can cause clothes damage or dryer shutdowns.
• Common fix for dryers that run too hot, have uneven drying, or won't maintain heat.
• Works with the dryer's existing temperature control system to stabilize cycles.

• One cycling thermostat

• Disconnect power before accessing or replacing the thermostat to avoid shock.
• This part mounts inside the dryer cabinet near the heating assembly.
• Handle the thermostat carefully and reconnect wires to the correct terminals.
• Test the dryer on a short cycle after install and monitor temperature; if symptoms persist, check other heating components.

Push-in nut that secures panels, trim, or small components to studs or shafts. Restores a firm, vibration-resistant fastener to help stop loose panels and rattling caused by a worn or missing nut. What it does:

• Secures panels, trim or small assemblies to mounting studs or shafts.
• Helps keep parts aligned and reduces vibration or rattling during operation.
• Common symptom: loose or shifting panels, audible rattling, or components that won't stay in place.
• Designed for a push-fit installation to replace worn or missing fasteners.

• Always disconnect power to the appliance before servicing.
• Push the nut fully onto a clean, undamaged stud until seated; replace damaged studs or mounting hardware.
• If needed, use pliers or a socket to press the nut on evenly—avoid deforming surrounding plastic or sheet metal.

This replacement screw secures panels and internal components in your appliance. It restores a tight, reliable hold when the original fastener is missing, stripped, or corroded—helping keep assemblies aligned and reducing vibration or rattling.

• Fastens panels, brackets, and components to the cabinet or frame
• Helps maintain alignment and reduce rattling or buzzing noises
• Replaces damaged, rusted, or missing fasteners
• Typical signs: loose covers/panels, gaps or misalignment, vibration during operation

• Disconnect power before servicing; wear work gloves
• Match thread and length to your model's parts diagram before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• If replacing multiple screws, swap one at a time to maintain alignment

A single pop rivet used to secure sheet-metal parts and small brackets on appliances for a permanent, vibration-resistant hold. Replaces missing or damaged rivets to restore proper attachment without welding. What it does:

• Provides a permanent blind-rivet fastening point for panels, brackets and trim.
• Replaces rivets that are sheared, loose or missing and prevents rattling or misalignment.
• Ideal where a solid, tamper-resistant join is required and screws aren't suitable.
• Works with a compatible pop-rivet tool for quick installation.

• Drill out the old rivet carefully; use the proper size hole for the replacement rivet.
• Use a dedicated pop-rivet tool and wear eye protection during installation.

This tub cover seal is a molded rubber gasket that helps keep wash water inside the tub and seals the cover area to prevent leaks. It restores a watertight seal and reduces seepage and debris buildup around the tub cover. What it does

• Seals the joint between the tub and tub cover to help prevent water leaks during cycles
• Cushions the cover edge to reduce noise and vibration
• Helps block lint, detergent residue and moisture from entering gaps
• Common symptoms: visible water on the floor near the tub cover, persistent dampness, or visible wear/cracking of the existing seal

• Disconnect power and water before beginning any repair
• Verify correct orientation and full seating of the gasket around the tub cover; replace if torn, deformed, or hardened
• Removal/installation may require access to the control panel or outer cabinet depending on model

This injector hose is a direct-fit replacement that routes water between dispenser and injector assemblies to restore proper water flow and prevent leaks. It's a straightforward part for repairing water delivery issues in compatible appliances. What it does:

• Carries water from the valve/dispenser to the injector or dispensing assembly
• Prevents leaks when intact; degraded or cracked hoses can drip or spray
• Helps restore proper dispensing when damaged hoses cause poor water delivery
• Common symptom link: visible leaking, water pooling, or dispenser not filling as expected

• One replacement injector hose

• Disconnect power and shut off the water supply before starting any repair
• Inspect fittings and clamps; replace clamps or O-rings if worn
• Push hose fully onto mating fittings and secure with proper clamps to prevent leaks

This bolt-style retaining screw secures appliance panels and components to prevent movement and rattling. A small but critical fastener that restores proper fit and reduces noise from loose parts. What it does:

• Fastens and secures panels, brackets, or assemblies in place
• Stops rattling or vibration caused by a missing or loose screw
• Restores proper alignment of the attached component
• Matches OEM fit and thread pattern for a secure hold

• Disconnect power and unplug the appliance before beginning any work
• Use the correct screwdriver or socket to avoid stripping the head
• Thread carefully and do not overtighten to prevent damage to threads or plastic parts
• Keep small parts away from children and work on a clean, well-lit surface

This orifice is the small gas passage that controls burner fuel flow to create a proper flame for cooking. It restores correct gas metering so the burner lights and maintains a steady flame. What it does:

• Regulates gas flow to the burner for a consistent, controllable flame
• Helps fix symptoms like weak or uneven flames, burners that won't stay lit, or delayed ignition
• Fits into the burner assembly where the gas line meets the burner tube
• Works with the appliance's existing valve and burner components to maintain safe operation

• One burner orifice

• Turn off the gas supply and unplug the appliance before servicing
• Inspect for debris or damage and replace if the orifice or seat is corroded or clogged
• Tighten to the manufacturer's torque spec; do not overtighten or force into the seat

Specs: 7/32 INCH

This exhaust cover plate protects and finishes the dryer's exhaust outlet, helping direct airflow and keeping the vent opening sealed from debris. It provides a clean, durable surface where the exhaust connects to the dryer cabinet. What it does:

• Covers and seals the dryer exhaust opening to prevent dust and lint buildup around the vent
• Helps direct exhaust airflow into the duct for proper ventilation
• Restores a finished appearance to the exhaust area after repair or replacement
• Can reduce drafts and discourage pests entering through the vent opening

• Disconnect power to the appliance before starting any work.
• Use basic hand tools; handle edges carefully to avoid cuts.
• Verify proper alignment with the exhaust opening and secure with the original screws or hardware.
• Inspect the exhaust duct and surrounding seals for wear.