Mlg15pddww Parts

Size: 8-32 x 1/4 inch.

Dryer won't start when door closes? This door switch signals the control board to allow operation. Direct replacement takes 15-30 minutes.

This terminal block connects the appliance to household power, providing a secure point for the incoming power cord wires. Replacing a damaged terminal block restores a solid electrical connection and reduces fire risk. What it does:

• Secures and organizes incoming power cord wires to the appliance's internal wiring
• Provides stable electrical contact for consistent power delivery
• Prevents loose or arcing connections that can cause intermittent power or overheating
• Common symptoms: appliance won't power on, intermittent power loss, visible burning or melted plastic at the power entry point

• Disconnect power at the breaker and verify the appliance is de-energized before starting
• Confirm wire placement and tightness; replace any scorched or damaged wiring or connectors
• Use proper tools and follow the appliance wiring diagram; tighten terminal screws to manufacturer torque if specified

Secures panels and components in place. Replace this fastener if stripped, corroded, or missing to restore proper alignment and eliminate rattling.

A small rubber grommet that cushions and secures continuous hinge areas to reduce wear and noise. Replaces a worn or damaged hinge grommet to help maintain smooth door movement and prevent metal-on-metal contact. What it does:

• Cushions the continuous hinge to reduce metal wear and rubbing
• Helps keep hinge components aligned for smoother operation
• Reduces rattling and vibration around the hinge area
• Protects surrounding surfaces from chafing and damage

• Disconnect power (or unplug appliance) before starting any repair
• Inspect the hinge area and mounting surfaces; remove old grommet and clean before installing
• Push grommet into place until fully seated and verify hinge operates smoothly
• If grommet is torn or hardened, replace with the correct part number

Pop rivet secures sheet-metal panels, brackets, and burner jar lids on appliances. Replace missing, drilled-out, or damaged rivets for permanent hold.

This LP gas conversion orifice adjusts gas flow for compatible gas ranges and cooktops when converting from natural gas to liquid propane, helping the appliance run safely and correctly after conversion. What it does:

• Replaces the burner orifice to reduce gas flow for LP fuel pressure and correct flame size
• Helps restore consistent, stable burner flames after an authorized LP conversion
• Addresses symptoms like unusually large or yellow flames, poor ignition, or unstable burner performance after conversion
• Works with the appliance's existing valve and burner components as part of a proper conversion

• Follow the appliance manufacturer's LP conversion instructions and parts list exactly
• Turn off gas supply and disconnect power before servicing
• Use correct torque and fittings; do not force or cross-thread the orifice
• Always perform an approved gas leak test and check burner flames after installation

Fix a sagging or misaligned dryer door that won't latch properly. This hinge restores smooth pivoting and secure closing. Simple repair in under an hour.

A single mounting screw designed to secure panels, brackets, or components on your appliance for reliable fit and reduced vibration. Use this genuine replacement when a fastener is missing, stripped, or rusted. What it does:

• Fastens panels, trim, or mounting brackets to restore proper alignment
• Helps eliminate rattling or vibration caused by loose or missing screws
• Replaces corroded or damaged hardware to maintain safe operation
• Restores secure attachment for parts that no longer hold in place

• Disconnect power to the appliance before starting any repair
• Use the correct driver bit to avoid stripping the screw head
• Tighten until snug; avoid overtightening which can strip threads or damage parts

This power cord supplies electrical power to the appliance and replaces a damaged or worn cord to restore safe, consistent power delivery. The "as wrapped" packaging means the cord ships neatly coiled for protection in transit. What it does:

• Provides the appliance's main AC power connection so it can operate
• Replaces frayed, cut, or otherwise damaged cords to eliminate power loss
• Can resolve symptoms like no power, intermittent power, or visible cord damage
• Designed for direct replacement where the OEM cord mounts and terminates the same way

• Unplug the appliance or disconnect power at the breaker before servicing
• Route the cord and attach with the existing strain relief or mounting bracket
• Ensure connections match the original cord terminals and are tight

A replacement push button for the appliance control panel that restores reliable user input and selection of settings. Use this button to replace cracked, worn, or unresponsive controls and return normal panel operation. What it does:

• Replaces a damaged or worn push button on the control panel.
• Restores tactile feedback and reliable button activation when the original is stuck, cracked, or non-responsive.
• Allows selection of appliance cycles and settings that rely on that specific control input.
• Works as a direct-fit panel button when the OEM part number matches.

• Disconnect power to the appliance (unplug or shut off circuit breaker) before beginning any work.
• Access typically requires removing the control or console; use appropriate screwdrivers and retain all fasteners.
• Inspect how the original button is mounted before removal—some buttons snap in, others seat behind the lens; if soldering or circuit-board removal is required, consider service.
• Confirm the OEM part number on your appliance and compare the replacement to the original before installation.

Cracked or faded control panel display? This dryer display cover protects the touchpad and display lens while restoring a clean, readable appearance.

Spesc: #12 pozi - drive

This part is a replacement dryer tub. If the current dryer tub is broken or defective, this part can be used for replacement. It is intended for use with a variety of dryer models. The dryer tub is what holds clothes or materials that need to be dryer and rotates them in order to ensure they are dried sufficiently. Over time or with regular appliance use, this part may corrode, crack, dent, bend, or be otherwise damaged, requiring replacement. Ensure the appliance is entirely disconnected from the power source before attempting any repairs. It's recommended that work gloves are worn for protection.This is a genuine OEM part made by Whirlpool and has been sourced directly from the manufacturer. This dryer tub is suitable for use on a variety of dryer models manufactured by Whirlpool, Maytag, Crosley, and some other brands. It is sold individually.