Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement support bracket that secures internal microwave components. Needed when original bracket is cracked, broken, or missing, causing loose assemblies.
Replacement name plate that restores your appliance's identification label. Needed when the original plate is faded, damaged, or missing.
Using intuition Read more
Microwave fan stopped or making noise? This blower wheel restores proper airflow and cooling. Common fix for overheating units. DIY repair in 20 minutes.
The fan that cools the main unit had started making noise a few weeks ago, I tried cleaning and lubricating the bearings, but the fan would make noise when it heated up, then finally stopped. I replaced the fan, it was up and running within 20 minutes of receiving the parts. Read more
If your microwave is noisy or has weak ventilation, the fan wheel may be worn or unbalanced. This part restores proper airflow and quiet operation.
Fix a microwave that won't heat or makes loud humming noises with a new high voltage capacitor. This part stores and discharges current to the magnetron.
I researched the problem. Found the solution online and ordered parts from AppliancePartsPros.com. It only took a screwdriver to make the repair. The only confusion I had is my model of microwave had a double diode, and the one sent to me (by model number) was a single diode. I wasn't sure what to do, either install the new single one or put the old double unit in. I went with the new single diode, and it works fine. I don't know why the two differences, but it all worked out. Read more
Reduces electrical interference in your microwave. Mounts near the power supply. Replace if cracked, damaged, or causing blown fuses or failed operation.
I replaced the Control Panel Module and Noise Filter Board which restored my Kenmore Elite (Samsung) deluxe microwave oven back to full operation. Also replaced the Damper cover with a brand new one, along with the left-side cabinet bolt. I contacted AppliancePartsPros.com regarding the unused parts which were not needed, and I was very promptly provided a Return Merchandise Authorization (RMA). Thus far the process has been smooth Laarand efficient, and the parts ordering, technical and... Read more
Microwave not heating but all other functions work? This magnetron thermostat protects against overheating. Easy DIY repair in under an hour.
Removed unit from wall and took outer shell off, de-energized capacitor and then took a multi-meter and tested all the High voltage parts and magnetron. They tested out fine other than the diode and then I looked at the "Safety" circuit if you will the power loop that goes through door switches and thermostats to energize the High Voltage transformer and magnetron. Turns out the thermostat that is on the side of the magnetron wasn't closed, so I took a butane torch and heated it up past the... Read more
If your microwave runs but won't heat, a failed magnetron capacitor may be the cause. This high-voltage component stores energy for the magnetron.
This oven temperature sensor senses cooking cavity heat and sends accurate temperature readings to the range control so your oven can reach and maintain set cooking temperatures. Replaces a failed or intermittent sensor for consistent performance. What it does:
Fix a microwave with no display, non-responsive controls, or dead control panel. This control transformer powers the electronic control board and interface.
Fixes uneven heating and unusual noise caused by disrupted airflow. This air deflector restores proper circulation inside your microwave or hood combo unit.
Black grill vent cover for microwave and microwave/hood combo units. Installs over the filter area. Replace if cracked, broken, or won't sit flush.
I identified the name of the part from the manual diagram, typed it into AppliancePartsPros.com, double-checked the model to make sure it would fit (thank you, thank you for provide that double-check feature, which I'm sure has saved many other customers the trouble of shipping back the wrong parts and reordering the right ones), found a "how to" video on youtube, and set to work. I ended up having to replace the grill vent as well as the two filters behind it, because part of the grill vent... Read more
The Outer Door is an OEM part for Whirlpool built-in microwaves. It forms a sturdy outer shell that protects interior electronics and acts as the interface point when accessing the cooking chamber.
Causes of a bad outer door can include dents or cracks developing over time from repeated opening and closing, especially if subjected to excessive force. Surface damage from aggressive cleaning chemicals is also possible.
Symptoms of a bad outer door include:
Color: Black
Replacing with a genuine Whirlpool outer door ensures a perfectly fitted, long-lasting barrier. Compatible brands include KitchenAid, Jenn-Air, and select Kenmore built-ins.
Your support allowed me to have the confidence to do the repair. And I learned about my unity and microwaves in general. GR8 Read more
Experiencing excess noise from your microwave? A cracked or missing motor cover lets debris contact moving parts. This shield restores protection in minutes.
Replacement mounting bracket that secures internal microwave components and keeps assemblies aligned. Install when original is cracked, broken, or missing.