Mrt888fffzoo Parts

This wire harness connects the touch matrix/user interface to the appliance's control system, carrying power and keypad signals. Replacing a damaged harness can restore reliable button response and consistent control-panel operation.

• Links the touch matrix/user interface to the main control board
• Transmits low-voltage power and signal inputs from the keypad
• Improper routing or damaged conductors can cause intermittent inputs
• Can lead to symptoms like unresponsive buttons, erratic UI behavior, or flickering/blank panel

• Disconnect power to the appliance before servicing; shut off gas supply if applicable
• Photograph original wire routing and connector locations for reference
• Depress connector locking tabs—do not pull on wires; seat connectors fully
• Route and secure the harness away from sharp edges and heat; reuse retainers/clips

The Door Gasket is an OEM replacement part for Whirlpool refrigerators. It is designed to create a tight seal between the fresh food door and the refrigerator cabinet, preventing cold air from escaping and maintaining a reliable barrier against cold air leaks.

A bad fresh food door gasket can occur due to wear and tear, cracks, or damage to its structure. If you notice symptoms such as condensation or frost buildup inside the refrigerator, difficulty in maintaining temperature, or the door not closing properly, it may be time to replace the door gasket.

Symptoms of a bad fresh food door gasket include:

• Condensation or frost buildup inside the refrigerator
• Difficulty in maintaining temperature
• Door not closing properly

Restore your refrigerator by replacing the faulty or damaged fresh food door gasket with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This compressor grommet is the rubber isolator that cushions the refrigerator's compressor at its mounting points. Replacing a worn grommet helps quiet vibration and rattling and reduces stress on refrigerant tubing for smoother, safer operation.

• Isolates the compressor from the base to damp vibration and humming
• Helps prevent metal-to-metal contact and rattling at the mounts
• Supports proper compressor alignment to reduce stress on tubing
• Helps with symptoms like loud buzzing/rattling or cracked/flattened rubber at the compressor feet

• Unplug the appliance and remove the rear access cover to reach the compressor area
• Support the compressor while removing hardware; replace the grommet in the same orientation
• Avoid kinking or stressing refrigerant lines; no sealed-system opening is required
• Tighten mount fasteners evenly and ensure the compressor sits level and isolated

The Control Module is an OEM part for Whirlpool refrigerators. It is responsible for regulating and monitoring all major refrigerator functions such as temperature settings, lighting, ice/water dispenser operation, alerts and notifications. As the central processing unit, the control module receives inputs from sensors throughout the fridge and directs outputs to components like the compressor, fans, doors alarms and more.

Symptoms of a bad control module include:

• Fluctuating or inconsistent interior temperatures  
• Frost or ice buildup inside compartments
• Lights, dispensers or functions not working properly
• Error codes or fault messages displayed

Causes of control module failure can be long term use outside of its operational life, damage from power surges or physical impacts to wiring/circuit boards. 

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This rear unit compartment cover protects internal components and provides a finished steel shroud for the appliance, helping prevent debris contact and reducing exposure to wiring and electronics. Durable steel construction for reliable protection. What it does:

• Covers and shields rear compartment components from dust, debris, and accidental contact
• Helps maintain proper airflow routing and component separation inside the unit
• Reduces noise from internal parts and gives a finished appearance to the rear compartment
• Can prevent shorting or damage caused by foreign objects reaching wiring or electronics

• Disconnect power to the appliance before beginning any work
• Use appropriate hand tools to remove and reinstall mounting screws; retain any original hardware if reusable
• Align tabs and mounting holes carefully to avoid bending the cover or stressing adjacent components
• Wear gloves to protect hands from sharp edges

Color: Grey

The Compressor is an OEM part for Whirlpool refrigerators. It is responsible for the cooling process of your refrigerator.  It compresses the refrigerant gas, creating the necessary pressure to circulate refrigerant and regulate the temperature inside the refrigerator. 

A bad compressor can occur due to various factors, including wear and tear, electrical issues, or refrigerant leaks. If you notice symptoms such as inadequate cooling, unusual noises coming from the refrigerator, or the refrigerator not running at all, it may be time to replace the compressor.

Symptoms of a bad compressor include:

• Inadequate cooling or inconsistent temperature
• Unusual noises, such as clicking or buzzing
• Refrigerator not running or not cooling at all

Repair your refrigerator by replacing the faulty or damaged compressor with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This mounting bracket secures internal components to the appliance chassis, restoring stable support and alignment. It replaces a worn, bent, or damaged bracket to reduce rattling and prevent parts from shifting during operation. What it does:

• Provides a secure mounting point for internal assemblies to the appliance frame
• Restores proper alignment when a loose or bent bracket causes vibration or noise
• Prevents components from shifting, which can lead to wear or intermittent operation
• Helps eliminate rattling, clunking, or movement-related symptoms during use

• One mounting bracket

• Disconnect power and water before beginning any repair
• Use original screws or fasteners; replace any stripped or damaged hardware

This evaporator cover is the plastic shroud that protects the refrigerator evaporator coil and helps direct cold airflow through the freezer compartment for more consistent cooling. It replaces a cracked, warped, or damaged cover to restore proper airflow and reduce frost buildup. What it does:

• Shields the evaporator coil from ice, debris, and accidental contact
• Channels cold air evenly from the evaporator into the freezer and fresh-food sections
• Helps reduce uneven cooling, excess frost, and airflow noise caused by a damaged cover
• Works with the evaporator fan and defrost components to maintain normal operation

• One evaporator cover / airflow shroud

• Disconnect power before beginning work to avoid electrical shock or compressor startup
• Remove interior panels, shelves, and the evaporator fan as needed for access
• Handle carefully—plastic edges and nearby metal parts may be sharp
• Follow OEM service instructions for proper fit and to verify any related parts

The Wire Harness is an OEM part for Whirlpool refrigerators. It is responsible for providing electrical connections between various parts of the refrigerator, ensuring proper voltage and communication.

A bad wire harness can be caused by wear and tear, exposure to temperature fluctuations, or accidental damage. If you experience issues such as intermittent power loss, malfunctioning components, or error codes on your refrigerator, it may indicate a problem with the wire harness.

Symptoms of a bad wire harness include:

• Intermittent power loss or flickering
• Malfunctioning display or control panel
• Inconsistent cooling or temperature fluctuations

Replace your faulty wire harness with this genuine OEM part to restore your refrigerator. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

This tempered glass shelf replaces a broken or missing refrigerator shelf to restore storage space and keep items organized. It offers a flat, easy-to-clean surface that resists spills and supports food containers. What it does:

• Provides stable storage for groceries, beverages, and containers inside the refrigerator
• Helps contain spills and makes cleaning quick and simple
• Restores proper spacing and organization when a shelf is cracked or missing
• Fits into existing shelf rails or supports to sit securely in place

• One tempered glass shelf

• Handle carefully; tempered glass can break if dropped or struck
• Remove all food and loose items from the shelf area before installing
• Slide the shelf into the existing rails or supports until it seats fully and evenly
• If the shelf does not seat properly, stop and inspect rails or supports for obstruction or damage

This humidity control graphic is the replacement label for the crisper drawer humidity slider, restoring clear markings so you can set and read the vent position easily. It helps make humidity settings visible and intuitive. What it does:

• Replaces worn, faded or missing humidity-slider markings on the crisper vent
• Restores clear low/med/high or open/closed indicators for accurate vent position reading
• Helps prevent confusion when adjusting drawer humidity for produce storage
• Matches OEM appearance and placement to maintain original look

• One humidity control graphic/label for the crisper humidity slider

• Disconnect power to the appliance before accessing interior components when required
• Remove the crisper drawer and clean the mounting area; peel-and-stick or snap-in fit may be adhesive-backed
• Align the graphic carefully before attaching to avoid rework; press firmly to ensure full adhesion

This heat shield protects nearby components from high oven temperatures, helping prevent heat damage and maintain safe operation. It's a direct-fit replacement designed to restore proper thermal protection. What it does

• Deflects and shields adjacent parts from radiant heat generated by the oven cavity.
• Helps prevent discoloration, warping, or premature failure of nearby panels and wiring.
• Can stop heat-related smells or scorching around the oven interior or cabinet.
• Restores intended oven airflow and thermal clearance when the original shield is damaged or missing.

• One replacement heat shield

• Disconnect electrical power (and shut off gas for gas ranges) before starting any repair.
• Handle carefully — edges may be sharp; wear gloves and eye protection.
• Verify correct mounting orientation and fasteners; reuse original screws if in good condition or replace with OEM-specified hardware.

This is a replacement mounting screw used to secure the defrost timer assembly to the refrigerator control housing, restoring proper fastening and preventing the timer from shifting or vibrating during operation. What it does:

• Secures the defrost timer to the control housing so the timer stays in position.
• Prevents vibration or movement that can cause intermittent contact or noisy operation.
• Helps maintain reliable defrost cycle timing by keeping the timer properly aligned.
• Addresses symptoms such as a loose or missing fastener, rattling behind the control panel, or a timer that shifts when the door is opened.

• Unplug the appliance before starting work to prevent electrical shock.
• Access the control housing or timer bracket per your model's service instructions.
• Use the correct screwdriver or driver bit; do not overtighten—stop when snug to avoid stripping.
• Retain removed hardware for reference and compare screw length/threads before installing.

This replacement control switch completes the appliance's electrical circuit so controls and functions respond correctly. It restores user input and on/off signaling for reliable operation of the affected control or latch assembly. What it does:

• Acts as the electrical contact that opens or closes a control circuit when pressed or actuated
• Restores control-panel or door/lid signaling so cycles can start and stop as intended
• Common symptom fixes: appliance won't start, intermittent or no response from a button or control, or a stuck/non-responsive switch
• Fits into the original switch housing and mates with factory wiring harnesses when the correct part is used

• One replacement control switch

• Disconnect power (unplug or switch off breaker) before attempting replacement
• Handle electrical connectors gently and avoid forcing terminals; replace any damaged wiring or connectors