Mtd Gold Small Engine Spark Plug Parts

The Screw is an OEM part for Whirlpool microwaves. It is responsible for securing various parts of the microwave together. This screw ensures a tight and secure fit for parts and helps maintain the structural integrity of the microwave, preventing any loose or rattling parts.

A bad microwave screw can occur due to wear and tear, accidental damage, or misplacement during maintenance or repairs. If you notice symptoms such as loose or wobbly components, difficulty in opening or closing the microwave door, or abnormal noises while the microwave is in use, it may be time to replace this part.

Symptoms of a bad microwave screw include:

• Loose or wobbly components
• Difficulty in opening or closing the microwave door
• Abnormal noises during operation

Restore your Whirlpool microwave by replacing the faulty or missing microwave screw with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

May also be called a key. Color: Red.

This white PC-900 panel insert replaces a worn, cracked or missing trim piece on compatible Whirlpool control panels. It restores a clean finished appearance and provides a stable surface for buttons and mounting clips. What it does:

• Covers and protects openings in the appliance control panel to help keep out dust and debris.
• Provides a flush mounting surface for buttons, switches and retaining clips.
• Restores cosmetic appearance when the original insert is cracked, chipped, discolored or loose.
• Helps maintain proper button alignment and prevents gaps around controls.

• Disconnect power to the appliance before beginning any service.
• Remove the control panel bezel or screws as required to access the insert; gently release retaining clips to avoid damage.
• Align the insert with mounting points and snap or fasten into place; verify buttons move freely.

This G4 orifice holder mounts beneath the cooktop to secure the burner orifice and route gas from the valve to the burner head. Replacing a damaged holder helps restore proper gas flow and consistent burner performance.

• Holds and aligns the orifice for the G4-designated surface burner
• Channels metered gas from the valve to the burner head
• Supports stable, even flame and reliable ignition at that burner
• A worn, cracked, or stripped holder may cause weak/uneven flame, delayed ignition, or a gas odor near the burner

• Disconnect power and shut off the gas supply before servicing; allow the appliance to cool
• Remove burner caps/heads and access the holder
• Transfer the existing orifice spud if reusing, or install the correct orifice specified for your gas type
• Tighten fittings to spec and leak-test all gas connections with an approved solution before restoring service

Escutcheon restores the finished look of your appliance while protecting control switches and openings from grease, spills and debris. Use it to replace cracked, damaged or missing trim. What it does:

• Covers and protects control components and switch openings from moisture, food and debris.
• Restores the appliance's cosmetic appearance and helps secure knobs and switches.
• Common repair for cracked, warped or missing trim that leaves controls exposed.
• Reduces rattling or loose-feeling control panels by providing a snug trim fit.

• Disconnect power (unplug or shut off breaker) before starting any repair.
• Handle the trim carefully to avoid scratching the finish; use proper screwdrivers and a trim tool as needed.

This deodorant insert helps neutralize and absorb odors inside the appliance, keeping the interior fresher between uses. Replace the insert when its scent fades or odors persist even after cleaning.

• Absorbs and reduces unpleasant smells within the appliance cavity
• Helps control lingering odors between regular cleanings
• Common signs it needs replacement: persistent odors, missing/empty insert, or reduced scent
• Supports a cleaner, fresher-smelling appliance environment

• Disconnect power before servicing for safety
• Open the appliance and locate the deodorant holder or mounting area
• Remove the old insert and snap or seat the new deodorant into place, following holder orientation
• Close the door and restore power

Medium. Color: Black. Measures about 2-1/2 inches in diameter.

This ram stop is a small control component used in the ram assembly of trash compactors. It limits ram travel so the compactor stops at the correct position and the drawer opens smoothly after each cycle.

• Limits the upward travel of the ram to a fixed stop point
• Helps the ram return fully to the up position at the end of the cycle
• Reduces binding and prevents over-travel that can strain components
• Typical symptoms include a drawer that won't open or is hard to open, or a ram that doesn't return to the top

• Disconnect power to the compactor before servicing
• Remove the drawer/bin for access and support the ram
• Remove the damaged stop and install the replacement, ensuring it is fully seated and correctly oriented
• Run an empty test cycle to confirm the ram stops at the proper height

Color: Black. This large cap measures about 3 inches in diameter. For gray order WP3191905. For the small cap order WP3191898.

Size: Large.

Almond. Size: 13 oz. can. Acrylic appliance paint.

Color: gray. Measures about 3 inches in diameter.

Includes 7 spuds.

This switch nut secures a rotary control or switch to the appliance's front panel. Replacing a stripped or missing nut keeps the control stable so the knob turns smoothly and the shaft stays properly aligned.

• Clamps the switch/control to the panel to prevent movement or rotation
• Helps maintain correct knob alignment with dial markings
• Common symptoms: loose or wobbly knob, switch rotates in the panel, missing/damaged nut
• Often needed after service if the original nut is stripped or lost

• Disconnect electrical power before servicing
• Remove the knob and any decorative escutcheon; thread the new nut onto the switch bushing from the front of the panel
• Support the switch from behind while tightening; do not overtighten to avoid panel or switch damage
• Restore power and test control operation

This factory fastener replaces a worn or missing screw to securely hold appliance components in place. Use it to restore a tight, rattle-free fit so panels, brackets, or assemblies stay properly aligned during everyday use.

• Secures panels, brackets, or internal components
• Helps correct loose, rattling, or misaligned parts
• Useful when a screw is stripped, corroded, or missing
• Maintains proper fit and stability after service

• Disconnect power and shut off water supply before service
• Match the original screw location and orientation; replace like-for-like
• Start threads by hand to avoid cross-threading; do not overtighten
• If threads are damaged, repair or replace the receiving clip/insert

This replacement stud is a factory-specified piece of hardware used to secure components in your appliance. Replacing a worn, stripped, or missing stud restores a solid fit to help reduce looseness and vibration. What it does:

• Provides a mounting point to fasten specified parts or panels
• Helps keep components aligned and secure during operation
• Replaces damaged, corroded, or missing original hardware
• Can resolve symptoms like loose parts, rattling, or misalignment where this fastener is used

• 1 stud

• Disconnect power; shut off water and/or gas supply if applicable
• Access the mounting location per your model's service information
• Start threads by hand to avoid cross-threading; tighten only until snug
• Reuse any original washers, clips, or nuts if required and in good condition