Mum 7010Uc Parts

This fixed gear transfers rotational motion within the appliance's drive assembly to enable proper movement of linked components. It restores reliable gear engagement and helps eliminate slipping or intermittent operation when worn. What it does:

• Replaces a worn or damaged gear that transmits drive motion inside the appliance
• Helps restore consistent mechanical engagement and torque transfer in the drive train
• Can reduce grinding, skipping, or intermittent operation caused by stripped or broken gear teeth
• May stop noise originating from a damaged gear mesh during normal cycles

• Disconnect power and water (if applicable) before beginning any repair.
• Access and removal usually require disassembly of the drive or motor housing.
• Inspect adjoining gears, shafts, and bearings for wear; replace any damaged components to prevent repeat failure.
• Use proper tools and avoid forcing parts.

A replacement kneading arm for Bosch stand mixers that mixes and shapes dough for breads and pastries. Restores proper dough handling so your mixer can knead evenly and reduce manual effort. What it does:

• Attaches to the mixer drive to knead and fold dough during mixing cycles
• Helps develop gluten for consistent dough texture and rise
• Commonly replaced when bent, damaged, or no longer engaging properly
• Works for typical dough recipes: bread, pizza, and heavy batters

• One kneading arm

• Turn off and unplug the appliance before installing
• Remove bowl and existing attachment, then align and push the new arm onto the drive until it seats
• If the arm does not fully engage, stop and check for obstructions or damage to the drive hub

This protective blender cover keeps the blender jug sealed during blending and helps prevent splashes for easier cleanup. Designed to fit the matching Bosch blender jug and restore a tight, functional seal. What it does

• Covers the blender jug opening to reduce splatter and contain ingredients while blending
• Helps maintain a secure seal so contents stay in the jug during operation
• Useful when blending liquids, sauces or soft ingredients that tend to splash
• Can prevent debris from entering the jug when not in use

• Always unplug the appliance before installing or removing parts
• Align the cover to the jug opening and press into place until it seats securely
• Inspect for cracks or wear before use; replace if damaged
• No special tools required for basic installation

This driveshaft transmits motor torque to the appliance drum so the drum rotates smoothly. Replacing a worn or broken driveshaft helps stop excessive noise, wobble, scraping, or failure-to-spin symptoms. What it does:

• Transfers rotational force from the motor to the drum for normal operation
• Maintains drum alignment; a damaged shaft can cause wobbling or uneven rotation
• Failing shafts may cause loud squeaks, scraping noises, or prevent the drum from spinning
• Works with bearings, couplers and support assemblies—inspect related parts when replacing

• Disconnect power before starting work; follow all safety precautions
• Basic hand tools required; refer to the OEM diagram for disassembly steps
• Inspect and replace worn bearings, seals or couplers as needed to ensure proper operation
• If the shaft is seized or rusted, support the drum to prevent damage during removal

Color: stainless. It measures about 3-1/2 inches wide by 6 inches high.

This replacement dryer drum belt wraps around the dryer drum and drive pulley to transfer motor rotation to the drum, restoring normal tumbling and enabling proper drying action. What it does

• Transfers motor torque to the drum so clothes tumble during operation
• Keeps the drum rotating smoothly by maintaining proper belt tension
• Worn, stretched, or broken belts can cause the drum to stop turning, slip, or make squealing sounds
• Replacing the belt addresses tumbling and abnormal noise symptoms related to belt failure

• One dryer drum belt

• Disconnect power (and gas if applicable) before beginning any repair
• Access the drum per your model's service instructions—belt routing varies by design
• Inspect idler pulley(s) and motor pulley for wear and replace as needed to prevent repeat failures
• After installation, manually rotate the drum to verify correct routing and tension before restoring power

This timer knob is a direct-fit control knob that lets you set and adjust your appliance's timer quickly and precisely. It restores a firm grip and accurate timer control for appliances with a worn or broken knob. What it does:

• Provides a tactile grip to turn and set the appliance timer
• Engages the timer shaft so selections register properly
• Restores safe, predictable timer operation when the original knob is cracked or loose
• Helps eliminate slipping, off-center rotation, and difficulty selecting timer settings

• One timer knob

• Install on the timer shaft by aligning the knob opening and pressing firmly until seated
• If the knob won't seat, power off the appliance and inspect the timer shaft and retaining clip for damage
• Do not force a damaged knob onto the shaft; replace damaged timer shafts or retainers first

This spur gear is a direct-drive replacement gear that transfers rotary motion between motor and transmission components, restoring correct gear engagement and part movement in compatible appliances. What it does:

• Replaces a worn or stripped drive gear to restore proper mechanical engagement
• Helps eliminate slipping, erratic part movement, or loss of driven function
• Can stop grinding or clicking noises caused by damaged gear teeth
• Works as a direct mechanical link between motor/drive components and the driven assembly

• Disconnect power and water before any disassembly
• Requires disassembly of the drive/transmission housing; refer to OEM service manual for steps
• Inspect mating gears and shafts for wear—replace any damaged parts to prevent repeat failure
• Use only recommended lubricants per OEM guidance; do not force-fit or modify the gear

This adjustable leveling foot replaces a worn or damaged support leg to restore stability and keep the appliance sitting level on uneven floors. It helps remove wobble, reduce vibration, and protect flooring from scraping. What it does

• Provides height adjustment to level the appliance on uneven surfaces
• Stabilizes the unit to reduce rocking and noisy vibration
• Helps prevent the appliance from shifting during use
• Replaces a cracked, stripped, or missing support foot that causes instability

• One adjustable leveling foot

• Disconnect power and, if applicable, water supply before working on the appliance
• Tip or lift the appliance slightly (use a helper or appliance lift) to access and remove the old foot
• Thread the new foot into the mounting socket and adjust height until the appliance sits level
• Re-check level and stability after lowering the appliance; avoid over-tightening