Mvwb8300wq1 Parts

The Lid is an OEM part for Whirlpool washing machines. As the primary cover on top of the washer tub, the lid protects interior components while also serving an important functional purpose. During the wash cycle, the lid assists in retaining water and generating agitation within the tub to thoroughly clean clothes. 

Causes of a faulty lid can include warping, cracks, or breaks in the material over extended use. Prolonged exposure to moisture and chemicals may degrade its structural integrity.

Symptoms of a bad lid include:

• Inability to fully latch or seal closed 
• Loss of water retention ability during cycles
• Excessive leaks or standing water outside the tub
• Reduced agitation levels for inefficient cleaning

This is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, and Admiral models.
 

The Motor Rotor is an OEM part for Whirlpool electric top-loading washers. Located internally at the center of the washer basket, it transmits power from the motor to spin water from clothes during extraction cycles.  

Symptoms of a faulty motor rotor include: 

• Slow or inefficient spin that leaves clothes dripping wet   
• Abnormal vibrations felt from the tub during spin
• Premature winding motor sounds due to rotor imbalance

Causes involve normal wear from years of moving wet laundry loads. Damage could also occur from objects left in pockets that damaged the rotor during spin.

This OEM replacement is compatible with additional Whirlpool, Kenmore, and Maytag top-loading washers.

The Washer Control Board is an OEM part for Whirlpool brand washers. This board is responsible for controlling all functions and cycles of the washing machine. It analyzes input from sensors and displays cycle status and diagnoses error codes.

Causes of a bad control board can include water damage over time, failure of electronic components due to normal wear and tear, or improper installation.  

Symptoms of a bad control board include:

• The washer fails to start or does not advance through cycles
• Error codes are frequently displayed  
• Certain cycles or options no longer function properly
• - The display is not illuminated or is glitchy

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This leveling foot threads into the base of your appliance to support and stabilize it. Adjusting the foot helps level the cabinet, reduce wobble and vibration, and keep doors aligned for smooth, reliable operation. Also called a leveling leg. What it does:

• Provides an adjustable contact point to stabilize the unit on the floor
• Helps level the cabinet so doors align and seal properly
• Reduces rocking, rattling, or excessive vibration on uneven surfaces
• Replaces a cracked, stripped, or missing leveling leg

• 1 leveling foot

• Unplug the appliance and turn off water supply if applicable
• Use a helper to carefully move or tilt the unit; support it securely
• Unthread the damaged foot; thread in the new foot by hand, then fine-adjust with a wrench
• Level side-to-side and front-to-back; ensure all feet make firm floor contact

The Stator is an OEM component specifically designed for Whirlpool washing machines. It is the stationary part of the washer motor that induces a magnetic field, causing rotation in the rotor and driving the agitator or basket movement. 

Symptoms of a bad stator include: 

• The washer not agitating or spinning clothes during cycles  
• Loud grinding or knocking noises from the motor area
• The washer needs to be reset frequently
• Slow or inconsistent agitation or spin speeds

Causes of a stator failing include normal wear and tear of internal electric components over many usage cycles. Replacing with this genuine Whirlpool part helps maintain dependable washing performance.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. Replacing worn internal parts like the stator proactively prevents potential future washer motor issues.

This bearing supports a rotating component inside the appliance so it turns smoothly with minimal friction. Replacing a worn bearing helps quiet operation, improves alignment, and prevents premature wear of related parts. What it does:

• Provides a low-friction surface for a shaft or hub to rotate smoothly
• Helps maintain alignment to reduce wobble and uneven wear
• Contributes to quieter, more reliable operation
• Common signs of failure: grinding or squealing noises, rough/stiff rotation, noticeable play/wobble, or visible wear/damage on the old bearing

• 1 bearing

• Disconnect power to the appliance before servicing
• Access the bearing location and remove any retaining screws, clips, or fasteners; note the original orientation
• Clean mating surfaces; transfer any spacers/washers from the old part if present, and seat the new bearing fully
• Spin-test the component by hand to ensure smooth, wobble-free movement before reassembly and test

The Control Panel is an OEM part for Whirlpool washing machines. It is the interface that users interact with to operate the washer, allowing cycle and setting selections to be made. The control panel coordinates closely with the washer's electronic control board to initiate and monitor cycles.

Causes of a bad control panel may be due to prolonged exposure, resulting in cracking, damage from liquid ingress, or components wearing out over time.

Some symptoms of a faulty control panel are:

• Buttons sticking, faulty, or unresponsive  
• Inability to scroll through cycles or make selections
• Erratic display lights or missing display functions
• The control panel failing to power on or communicate with other components

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

This factory screw fastens appliance components securely. Replacing a missing, stripped, or rusty screw helps stop rattles, keep panels and brackets aligned, and restore a solid, as-designed fit.

• Secures panels, brackets, and trim to the appliance cabinet or frame
• Helps maintain alignment and reduce vibration or rattling noises
• Replaces damaged, corroded, or missing hardware
• Can resolve loose or shifting components

• Disconnect power and shut off gas/water to the appliance before service.
• Use the correct driver; start threads by hand to avoid cross-threading and do not overtighten.
• Install in the original location and match the OEM fastener type specified in your model's parts diagram.

The Sound Shield is an OEM replacement part for Whirlpool washers. It is a sheet metal panel installed behind the tub that helps reduce noise and vibration during spin cycles. With absorptive insulation, the sound shield dampens noise produced internally. 

Symptoms of a damaged sound shield include:

• Excessively loud operation, especially during high-speed spins
• Rattles, clanks, or resonant noises from inside the washer  
• Potentially weakened structure allowing tub movement
• Causes of a damaged sound shield can include tears or dents sustained over many high-speed spin cycles. Constant vibration may cause stress cracks or loose rivets.

 It is also compatible with some  Whirlpool, Maytag, Amana, and Kenmore brands.

The Lid Hinge is an OEM part for Whirlpool washers. It is specifically designed to be the left-side hinge for the washer lid, allowing for smooth opening and closing of the lid. The lid hinge ensures proper alignment and stability of the lid, providing easy access to the washer drum.  

A bad lid hinge can occur due to regular wear and tear, accidental damage, or mishandling. If you notice symptoms such as the lid not closing properly, difficulty in opening or closing the lid, or excessive movement or wobbling of the lid, it may be time to replace this part.

Symptoms of a bad lid hinge include:

• Lid not closing properly
• Difficulty in opening or closing the lid
• Damaged spring

Restore your Whirlpool washer's lid by replacing the worn or damaged lid hinge with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Dispenser Housing is an OEM part for Whirlpool washing machines. It serves as the mount for dispensers containing fabric softener and detergent. 

Causes of bad dispenser housing involve cracks emerging over time, and distorted openings meant for smooth draws.

Symptoms include:  

• Dispensers falling out of place or prematurely discharging contents  
• Disrupted metering from housing leaks along its mounting connections   
• Loosened assembly allowing dispensers to tip during agitation 

This OEM Whirlpool part is also compatible with some Maytag, Amana, and Frigidaire washers.

The Speaker is an OEM component specifically designed for Whirlpool brand washers. It alerts users with chime tones or voice prompts during cycle operation or any error states. Precise acoustic engineering allows for clear audio reception even amid operating vibrations. 

Symptoms of a bad speaker include: 

• No audio tones or voice prompts were heard  
• Muffled, distorted, or unusually loud sounds
• Speaker making rattling or buzzing noises

Causes can be damage from water damage, defects in the audio circuitry, or aging components. 

This speaker ensures optimal user communication. Without it, you cannot verify cycle progress or troubleshoot issues. Its dependable performance maintains the washer's convenience.

This Whirlpool OEM part fits perfectly while extending the equipment's lifespan. It is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.

The Bezel is an OEM part compatible with Whirlpool washing machines. This trim piece secures the control console interface within the cabinet opening. Proper mounting provides seamless integration for an aesthetically pleasing appearance.  

Causes of a bad bezel stem from environmental damages over time like cracks or discoloration from cleaning chemicals near the buttons. Repeated impact nicks and dents compromise structural integrity as well.

Symptoms of a bad bezel include:

• Loose hanging appearance no longer firmly fitted  
• Gaps forming entry points for lint and moisture damage
• Detached sections at risk of falling off entirely
• Visual deterioration marring overall style

This Whirlpool replacement bezel restores the finish and protects internal components. It is compatible with brands including Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This clamp secures a washer or dryer hose to its connection to prevent leaks and keep the hose firmly in place during operation. It replaces worn or loose clamps that allow water to escape or hoses to detach. What it does:

• Holds a washer/dryer hose to a nipple, collar or fitting to maintain a sealed connection
• Prevents water leaks caused by loose or corroded clamps
• Stops hoses from slipping off during drain or fill cycles
• Restores proper hose retention and reduces risk of water damage

• Disconnect power and turn off the water supply before starting any repair
• Inspect hose and fitting for damage; replace hose if cracked or frayed
• Use appropriate pliers or a screwdriver for the clamp style; avoid overtightening to prevent hose damage
• Verify a leak-free connection after restoring power and water

This is a replacement bezel — the trim piece that surrounds and protects the appliance control panel, restoring a clean appearance and helping keep buttons and displays shielded from spills and wear. Ideal when the original trim is cracked or cosmetic. What it does

• Covers and protects the control panel area from spills, dust and everyday wear
• Restores a finished look when the original bezel is scratched, faded or broken
• Helps keep control buttons and display edges aligned and accessible
• Fits at the front of the control console and works with existing buttons and switches

• One bezel as pictured

• High-level: typically snaps or screws into the control console — follow your appliance's service manual for removal and reassembly
• Disconnect power before starting work to avoid shock or accidental machine start
• Handle plastic trim carefully to avoid additional cracking; use appropriate screwdrivers or trim tools
• If other control components are damaged, inspect those parts before reassembly