Skip to Content
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Trusted Since 1999 Trusted Since 1999
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google

Mvwx500xw Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

More
Best Seller
Washer Transmission Gear Case
Genuine Whirlpool part
By: Whirlpool
Part Number: W11454372

Loud grinding noise during spin cycle? Failed gearcase bearings cause noise and oil leaks. Moderately difficult repair requires disassembly and cleanup.

Do-It-Yourself Stories from Customers like You Bearing went out on the gearcase   Darrell C. • San Angelo , TX • April 12, 2016

Disassembled washer and replaced gearcase and reassembled. Read more

More
$204.37

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Cap (Impeller)
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10305251

Impeller cap that fits over the pump impeller to protect moving parts and help maintain proper water circulation. Replacing a cracked or missing cap helps reduce leaks and restore reliable pump performance. What it does:

  • Covers and protects the pump impeller from debris and direct contact.
  • Helps maintain correct water flow and impeller alignment inside the pump housing.
  • A damaged or missing cap can cause reduced circulation, noisy operation, or leaks near the pump area.
  • Small, inexpensive replacement that can prevent further pump damage when installed promptly.
What's included: One impeller cap. Install notes:
  • Disconnect power (and water if applicable) before accessing the pump area.
  • Access may require removing an access panel or lower kick plate; keep fasteners and panels organized.
  • Press the cap onto the impeller until fully seated; avoid forcing if resistance indicates other damage.
  • Inspect the impeller and nearby seals while replacing the cap; replace the pump assembly or seals if they show wear.

Do-It-Yourself Stories from Customers like You The cap in the center of the he washer cracked   Kyra G. • New Port Richey , FL • February 21, 2016

After talking on line with the very helpful Kenneth K and sending a photo of the damaged part and another of where it exactly went on my washer, he was able to locate the part that I needed. I ordered the part late on Monday night, it arrived on Thursday. My husband easily put the part in and the washer is now working again. Read more

More
$23.61

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Top Lock Spring
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10248088

Washer lid won't lock or stays locked? This tension spring restores proper locking action. Simple DIY fix when the lid lock clicks or flashes continuously.

Do-It-Yourself Stories from Customers like You Washing machine door would not unlock after the load was complete   Sandi Z. • Weyauwega , WI • January 03, 2016

I was stunned and amazed that the directions we watched on you tube were spot on. It was a repair that I was able to do myself. I only needed to replace the latch and that fixed the problem, your tech was knowledgeable and the products came right away, thank you for saving me a costly repair bill. Read more

More
$6.86

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Control Knob (Selector), Each
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10251381

This replacement control knob lets you select settings and operate the appliance's controls with a secure grip and clear position index. Restores reliable user control when the original knob is cracked, loose, or worn. What it does:

  • Replaces a damaged or missing control/selector knob so you can turn and set controls accurately
  • Snaps onto the control shaft to provide a solid tactile stop and visible setting indicator
  • Commonly used when the original knob is cracked, stripped, stiff, or spins on the shaft
  • Matches OEM fit and rotation for proper function and alignment
What's included:
  • One control knob
Install notes:
  • Remove power to the appliance before replacing the knob to avoid injury
  • Pull the old knob straight off the control shaft and push the new knob onto the shaft until it seats
  • If the knob will not fully seat, check for obstructions or a damaged shaft before forcing it

Do-It-Yourself Stories from Customers like You Broken control knob   Lou C. • Kearny , NJ • July 18, 2015

TOOK OLD KNOB OFF, REPLACED IT WITH THE PERFECT REPLACEMENT. VERY PROMPT SHIPPING ALSO. Read more

More
$41.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Strike (Door Latch)
Genuine Whirlpool part
By: Whirlpool
Part Number: W11173602

This strike is the replacement door latch strike that secures the appliance door when closed, restoring a solid door catch and proper sealing. Use it to replace a worn or broken strike that prevents the door from latching. What it does:

  • Provides the mating catch for the door latch so the door stays closed
  • Restores proper door alignment and sealing when the original strike is damaged
  • Helps eliminate issues like a loose or unseated door that won't stay closed
  • Works with the existing latch assembly to re-establish reliable operation
What's included: One replacement strike Install notes:
  • Basic hand tools required; unplug appliance or disconnect power before service
  • Remove door trim or access panel as needed to reach the strike mounting screws
  • Align strike with latch, tighten fasteners securely, and test door operation

More
$16.26

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Laundry Center Cabinet Support Brace
Genuine Whirlpool part
By: Whirlpool
Part Number: W11661767

Replacement cabinet support brace that reinforces your laundry center's internal structure. Needed when the original is cracked, bent, or missing.

More
$52.68

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Adapter
Genuine Whirlpool part
By: Whirlpool
Part Number: 3363920A

 

More
$5.34

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Electronic Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: W10393448

Fix a washer that won't advance cycles, stops mid-wash, or has a blinking lid lock light. This electronic control board restores cycle operation.

More
$319.02

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer User Interface Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10272630

Fix a washer that won't start, has unresponsive buttons, or displays error codes with this user interface control board. Restores cycle selection.

Do-It-Yourself Stories from Customers like You After the wash cycle washer would drain and when starting spin cycle the lid lock light would start blinking and washer would stop   Leonard E. • Fullerton , CA • May 08, 2015

I HAD BEEN TOLD BY A SERV TECH IT WAS THE CONTROL BOARD SO I REPLACED THAT MYSELF. IT DID NOT FIX THE PROBLEM.. AFTER THAT I FOUND YOUR WEB SITE AND WHEN I WAS LOOKING AT SOME OF THE POSTED PROBLEMS I FOUND ONE THAT WAS EXACTLY LIKE MY ISSUE. SO I ORDERED THE ACTUATOR AND REPLACED IT. THE HOW-TO VIDEO GAVE ME THE CONFIDENCE TO FIX MYSELF AND NOW THE WASHER WORKS FINE. THANKS Read more

More
$245.20

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Siphon Break Kit
Genuine Whirlpool part
By: Whirlpool
Part Number: 285834

This kit includes a siphon break device that installs on the washer's drain hose connection to prevent water from siphoning back into the machine. It acts as an anti-siphon valve, ensuring proper drainage and preventing dirty water from flowing back into the wash tub. Replace this part if your washer is not draining properly, fills and drains at the same time, or if the existing siphon break is cracked or leaking.

Do-It-Yourself Stories from Customers like You New dishwasher needed siphon break kit   Jack C. • Palo Alto , CA • March 13, 2018

Ordered kit and installed Read more

More
$70.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Appliance Touch Up Paint
Genuine Whirlpool part
By: Whirlpool
Part Number: 799344

Color: White. Size: 1 qt. can. Acrylic appliance paint.

More
$174.30

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Wire Harness
Genuine Whirlpool part
By: Whirlpool
Part Number: W10240967

Wire harness for washers connects electrical components within the control system. Replace if wiring is damaged, frayed, or connections are loose or broken.

More
$84.57

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Electronic Control Board
Genuine Whirlpool part
By: Whirlpool
Part Number: W10405815

Fix washer display errors, cycles not starting, or buttons not responding with this electronic control board. Moderate DIY repair for most front and top load washers.

More
$252.29

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Bleach Dispenser
Genuine Whirlpool part
By: Whirlpool
Part Number: W10854969

This is a bleach dispenser cup or tray that fits into the washer's dispenser housing and holds liquid bleach until it is automatically released into the wash cycle at the appropriate time. It ensures bleach is diluted and distributed evenly rather than being poured directly onto clothing. Replace this dispenser if it is cracked, stained beyond cleaning, or if bleach is not dispensing properly during the wash cycle.

More
$57.39

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Screw (Mounting Fastener), 1 Piece
Genuine Whirlpool part
By: Whirlpool
Part Number: W11700520

This is a genuine replacement mounting screw that secures appliance components and panels so parts stay aligned and stable. Installing the correct screw restores proper fit and helps eliminate vibration or loose panels. What it does:

  • Fastens panels, brackets, or small components in place
  • Replaces missing, stripped, or damaged screws that cause loose parts
  • Helps stop rattling, vibration, or misaligned panels
  • Restores secure connections after repairs or part replacement
What's included:
  • One mounting screw
Install notes:
  • Unplug the appliance or disconnect power before starting work
  • Use the correct screwdriver bit to avoid stripping the head
  • Tighten until snug; avoid over-tightening which can strip threads or crack plastic
  • Keep removed hardware organized so you can reuse existing screws when applicable

More
$12.54

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
Washer Lid Lock Bezel
Genuine Whirlpool part
By: Whirlpool
Part Number: WPW10392092

If your washer lid lock looks damaged or the latch isn't aligning properly, this bezel secures the lock assembly and restores a clean finish around it.

More
$5.95

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart
  • 5,000+ Repair Videos 5,000+ Repair Videos
  • Same-Day Shipping Same-Day Shipping
  • 365 Day Return Policy! 365 Day Return Policy!
  • Repair ForumFree Tech Support!
  • Top Quality Store on Google