Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Replacement fastening screw for securing trim, panels, and brackets inside appliances. Use when original screw is missing, stripped, or damaged.
I pulled out the old housing and unplugged the motor. It pretty much came out in pieces. Remove the plastic from the motor, then had to take a pair of vice grips to hold the spindle in place to remove the auger. Remove what was still attached to the old Housing. Cleaned everything up and put the whole unit back together. The motor looked like it was somewhat cooked but still worked, so I ordered a new motor and auger to replace it. Because this fridge is 24 yrs old, Appliancepartspros... Read more
Specs: No.8-18AB WAFER HD
Fix washer leaks from the dispenser area with a new housing assembly. Supports the drawer and channels detergent properly. 10-minute DIY repair.
Took the back cover and top cover off-Ran a cycle, and with a flashlight watched for water- At first, we thought the drum had a leak, but later we saw that water was coming out of the housing drawer when water was going into the washer- Read more
Note: This part is one screw, order quantity needed.
The door hinges on my Maytag Neptune stacked washer/dryer where corroded badly. Took the time to replace the two hinges and repairing the epoxy coating on the front panel of the machine. Unit looks like new. Read more
Fix a washer that won't spin or agitate with clicking sounds. This motor control assembly regulates drive motor speed and direction. Moderate DIY repair.
Replaced the motor control assembly. Read more
Size: 10-24 x 3/8 inch.
Replaced timer control unit, first time doing this. Read more
This bolt-style retaining screw secures appliance panels and components to prevent movement and rattling. A small but critical fastener that restores proper fit and reduces noise from loose parts. What it does:
Specs: 7/32 INCH
Replaced it with the video listed..Maytag Atlantis dryer was not heating. Checked all components inside dryer, thermostat, coils, etc. All check out ok ......last thing I checked was the terminal. It was burned out. Quick video on your website was awesome! THANK YOU for the service, and the ease of ordering parts. LOVE THIS SITE! Read more
This hinge guide is the small bushing the hinge pin rides in. It reduces friction and keeps the panel aligned so the door or lid opens smoothly and closes flush for reliable everyday use.
Replacement 3/8-16 nut that secures bolts and threaded shafts in appliance assemblies. Needed when original nut is stripped, lost, or corroded.
Weekend laundry became very noisy, our 1987 Whirlpool washer began doing a dance across the floor and the drum was banging into the inner cabinet. After doing some research and watching a few videos on Appliance parts pros website. I inspected the washer and noticed one leg the rubber coating disintegrated, decided to change all four legs, springs and lid switch. Hardest part of the job is getting the cabinet together. Ops check good. Read more
This protective cover prevents hoses from rubbing against other components and causing damage inside the washer. Located near water inlet connections, it should be replaced if you notice water leaks from damaged hoses or see visible wear on the hose surfaces.
I am a mechanic so it was not difficult for me. Watching videos helped me a great deal Read more
The Switch Mounting Screw is an OEM part compatible with Whirlpool washing machines. This screw securely mounts the cycle selector switch within the control console assembly. Proper fastening ensures dependable operation of control functions.
Causes of a bad mounting screw can stem from stress cracks developing over multiple years of operation. Vibrations accumulate, slowly loosening connections housed in a wet environment.
Symptoms of a bad mounting screw include:
This Whirlpool replacement screw restores a tight mounting point. It is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
I had the problem couple years ago I bypassed unbalance switch it worked fine for a couple years and had the same problem again so ruled out unbalanced switch. Door lock light on and checked made sure wax motor pushed out all the way too the second switch for spin check OK, so took a chance on displacement switch x2. My family loves to over load it and also replaced by passed unbalance switch and boom every thing went back to normal. Its also good to clean every thing when apart. Read more
A replacement latch spring that helps the appliance door latch return and hold securely, restoring reliable door engagement and proper cycle starts. Fits the original latch mechanism and installs quickly for common latch-related issues. What it does:
Replacement mounting screw for securing panels, brackets, and components in dryers, refrigerators, and washers. Needed when screws are lost or stripped.
This was the perfect replacement part and once installed it fixed itself. Thank you! Read more
Seals and cushions the vent tube where it passes through the cabinet, preventing air leaks and vibration noise. Replace if cracked or worn. Verify fit.
I replaced the inner door panel, vent grommet, and door boot seal. Replacing these items was pretty straightforward, especially with the repair videos playing in the background. The only "challenging" things were getting the boot attached to the drum area and removing/reattaching the spring+cable around the boot seal. The total time also includes cleaning the inside of the washer and using some anti-rust jelly on the top panel near the detergent door. Washer is working great now. Read more
This is a rubber or plastic hose that connects the water inlet valve to the detergent or fabric softener dispenser in the washing machine. It carries water into the dispenser housing to flush soap or additives into the wash drum at the correct time during the cycle. Replace this hose if you see leaking near the dispenser area, the dispenser is not filling with water, or the hose shows cracks and deterioration.
First replaced inlet valve ( was not working properly). Still got code. Then replaced board assembly, washer worked properly. Replaced hoses because of the gunk that was in the old valve. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.