Nfw2700tw Parts

The Vent Coupler is an OEM replacement part for Whirlpool washers. This vent coupler plays a crucial role in maintaining proper airflow and ventilation within the washer. Its precise design and compatibility ensure efficient operation and aid in preventing issues related to moisture buildup and overheating.

A damaged or malfunctioning vent coupler can impede the washer's ability to ventilate properly, leading to potential moisture-related problems or overheating issues. Causes of a faulty vent coupler may include wear over time, blockage due to debris, or damage from external factors.

Symptoms of a defective Vent Coupler may include:

• Excessive heat buildup during washer operation
• Moisture accumulation or condensation within the washer's interior
• Inefficient drying or prolonged drying cycles

This is a genuine Whirlpool OEM replacement this part is also compatible with Maytag, Jenn-Air, and some Kenmore models.

This front counterweight mounts to the washer's outer tub to stabilize the drum assembly during spin. Replacing a cracked or loose weight helps curb excessive vibration, banging, and walking, restoring smoother, quieter operation.

• Adds mass at the front of the outer tub to help balance loads during spin
• Controls vibration and noise; reduces walking and off-balance interruptions
• Typical failure signs: cracked or broken weight, missing chunks, loose/rattling mount, loud knocking, severe shaking
• Visible damage to the weight or mounting area can indicate replacement is needed

• Unplug the washer and turn off water supply; wear gloves. The weight is heavy—use a second person if needed
• Support the tub and access the front of the outer tub; remove the original weight carefully to avoid damage
• Transfer and reuse any mounting hardware from the original part if needed; seat the new weight flush and tighten bolts evenly
• Run an empty test spin; inspect shocks/suspension and leveling

This dispenser drawer slides into the washer's dispenser housing and holds detergent and laundry additives for each cycle. Replace a cracked, stuck, or missing drawer to restore smooth operation and proper dispensing. What it does:

• Holds and organizes detergent and other laundry additives in labeled compartments
• Works with the dispenser housing to flush products into the tub at the correct time
• Helps contain liquids to reduce drips and spills around the dispenser area
• Typical failure symptoms: cracked/broken face or tabs, drawer binding or popping out, detergent left in the drawer, or water leaking at the dispenser

• 1 dispenser drawer

• Disconnect power and turn off water before servicing
• Fully extend the old drawer, press the release tab, and pull it free from the housing
• Move over any removable siphons or inserts from the old drawer if present
• Slide the new drawer in until it latches and glides smoothly; run a quick test cycle to check dispensing and leaks

This rubber seal fits around the water temperature sensor where it passes through the tub or housing. It restores a watertight barrier at the sensor port to help prevent leaks and ensure reliable temperature feedback.

• Creates a watertight seal around the temperature sensor
• Helps prevent drips or leaks from the sensor opening
• Supports stable, accurate temperature readings during cycles
• Typical failure signs: cracked, flattened, or brittle seal; moisture at the sensor area; pooling water beneath the unit; temperature-related faults

• Disconnect power and turn off water supply before servicing
• Access the sensor location and drain any remaining water
• Withdraw the sensor, remove the old seal, and clean the seating surface
• Lightly moisten the new seal with water, seat it fully, reinstall the sensor, and check for leaks during a test cycle

This siphon routes liquid bleach and fabric softener from the dispenser into the washer tub so additives are delivered at the correct time in the cycle. Replacing a faulty siphon restores proper dispensing and helps prevent leaks or staining. What it does:

• Directs bleach and fabric softener from the dispenser to the wash drum during the appropriate cycle.
• Ensures additives are introduced at the correct time for consistent wash results.
• A cracked, clogged, or broken siphon can cause poor dispensing, leaks, or product staining.
• Designed to fit into the dispenser assembly and work with the washer's existing dispenser plumbing.

• Disconnect power (and water if recommended) before servicing the appliance.
• Basic hand tools may be required; refer to the washer's service manual for disassembly steps.
• Handle plastic components gently to avoid cracking or misalignment of sealing surfaces.

Drain hose retainer keeps the appliance's drain hose securely fastened to the cabinet or pump, helping prevent the hose from slipping loose. Replacing a broken retainer reduces leaks and improper draining caused by a detached hose. What it does:

• Secures the drain hose to the cabinet, pump outlet, or drain connection to maintain correct hose positioning.
• Helps prevent water leaks and hose disconnection during drain cycles.
• Common symptoms of a failed retainer: visible hose movement, water at the rear or floor, or intermittent draining issues.
• Replaces worn or broken retainers that no longer hold the hose firmly.

• Always disconnect power and turn off water before servicing the appliance.
• Access may require moving the appliance or removing a rear/access panel to reach the hose retainer.
• Seat the drain hose fully in its proper position, snap or clip the retainer into place, and verify the hose is secure and not kinked.
• Inspect the drain hose for cracks or wear while replacing the retainer; replace the hose if damaged.

This electronic control board is the main control that manages appliance settings, cycles, and user inputs so the appliance responds correctly to commands. Replacing a faulty board can restore normal control operation and displayed feedback. What it does:

• Receives input from the control panel and sends signals to components to run selected cycles
• Manages timers, cycle selection, and display indicators so the unit follows chosen programs
• Common symptom linkage: unresponsive or erratic controls, blank or incorrect display, cycle failures, or appliance not starting
• Can produce diagnostic/error codes when onboard sensing detects faults

• Disconnect all power before servicing to avoid shock or damage
• Handle the board by edges and avoid static discharge; use ESD precautions if available
• Verify connector placement and orientation before reconnecting; do not force terminals

This power cord is the replacement electrical lead that supplies mains power to the appliance, restoring safe, reliable operation when the original cord is damaged or worn. What it does

• Delivers AC power from the wall outlet to the appliance's internal wiring and controls.
• Replaces frayed, cut, melted, or otherwise damaged cords that can cause intermittent power or safety hazards.
• Helps eliminate issues like no power, intermittent power loss, or visible cord insulation damage.
• Restores a secure connection at the appliance strain-relief and terminal block when installed correctly.

• One replacement power cord.

• Always disconnect power at the circuit breaker or unplug the appliance before installing.
• Inspect terminal block and strain-relief; replace any damaged hardware and secure the cord per the appliance wiring diagram.
• Follow the appliance manufacturer's wiring diagram for correct conductor routing and grounding.

This electronic control board replaces the main control module that governs oven functions, display, and user inputs. It restores reliable cycle control so the oven can run bake, broil, timers, and display settings correctly. What it does:

• Controls oven temperature settings, bake/broil cycles and timed cooking functions
• Manages display and touchpad/console responses for user inputs
• Coordinates safety features such as timed shutoff and element relays
• Common symptom: blank or non-responsive display or touchpad
• Common symptom: oven won't heat or cycles incorrectly

• One electronic control board

• Disconnect power to the appliance at the breaker before starting
• Handle the board carefully to avoid static discharge and physical damage
• Follow OEM disassembly/reassembly steps and secure all connectors firmly
• After installation, restore power and verify proper operation of controls and cooking functions

Kit contains two 10 feet inlet hoses.

This replacement door handle restores a secure, easy-grip surface for opening and closing your refrigerator. It replaces a cracked, broken or loose handle to improve safety and daily use. What it does:

• Provides a sturdy grip for opening and closing the refrigerator door
• Replaces cracked, worn or broken handles that can snag or separate
• Eliminates loose or wobbly feel that makes the door hard to operate
• Restores the appliance's original appearance where the handle is damaged

• Disconnect power or unplug the appliance before starting
• Handle installs with existing door fasteners; retain original screws or mounting hardware where possible
• Use the correct screwdriver or bit; align handle over mounting points before tightening
• Do not overtighten fasteners to avoid cracking the replacement handle

The Nozzle is an OEM part for Whirlpool washing machines. It spray clean water and detergent throughout the drum to thoroughly saturate clothes during cycles.

Common causes of replacement involve mineral deposits clogging spray ports over time or cracks reducing water pressure. Impacts from overloading or an imbalanced spin cycle may also damage plastic.

Symptoms include:

• Weak or incomplete water coverage of clothesloads
• Soap scum residue failure to rinse away fully
• Damp spots signifying poor absorption into fabrics
• Strange noises or shaking from uneven fluid dispersal

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.