Nfw2700tw Parts

The Detergent Dispenser Drawer is an OEM part for Whirlpool washing machines. It plays a crucial role in dispensing detergent during the wash cycle. The drawer is designed to hold and release the appropriate amount of detergent at the right time, ensuring optimal cleaning performance. 

Symptoms of a bad dispenser drawer include:

• Improper dispensing of detergent  
• Insufficient cleaning results
• Leaks or drips from the dispenser area
• The drawer not opening or closing correctly

Causes of a bad dispenser drawer can include clogging or blockage in the drawer mechanism, damage to the drawer or latch, or malfunctioning electronic components that control the dispensing process. 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement frame restores the structural support for the component it holds, helping it fit securely and operate smoothly. Replace a cracked, warped, or broken frame to bring back proper alignment and stability.

• Provides rigid support and correct alignment for the attached component
• Maintains proper spacing and level so items sit correctly
• Helps associated drawers or bins slide and seat smoothly where applicable
• Common signs of failure: cracks, broken tabs, warping, wobble, or poor fit

• Disconnect power before servicing
• Remove the affected assembly and set aside any inserts or hardware from the old frame
• Transfer reusable parts (such as glass, rails, or gaskets) to the new frame
• Ensure the frame is fully seated and avoid overtightening any fasteners

This clamp secures flexible hoses and small-diameter tubing to fittings, helping prevent leaks and maintain proper fluid flow in appliance systems. It's a simple replacement that restores a tight, reliable connection. What it does

• Holds a hose or tube firmly on a barb or nipple to stop leaks and loss of pressure
• Keeps water, drain, or vent hoses seated during normal appliance operation
• Replaces worn, corroded, or loose clamps that cause dripping or poor connections
• Works where a small, durable clamp is required for routing or securing tubing

• One hose clamp

• Inspect hose and fitting for damage; replace hose if cracked or hardened before installing the clamp
• Tighten clamp until snug—do not overtighten; ensure even compression around the hose
• Disconnect power and water as appropriate and take safety precautions before working on the appliance

This replacement cross-flow hose routes fluid/air between refrigerator components to restore normal operation and stop leaks or drainage issues. Durable black hose designed to match the original fit and function. What it does

• Routes condensate/drain or air between evaporator and drain areas to ensure proper flow
• Replaces cracked, split, or deteriorated hose that can cause leaks or pooling under the unit
• Helps prevent frost or moisture buildup when the original hose is blocked or damaged
• Restores correct drainage/flow where a worn hose caused poor performance or water on the floor

• One black cross flow hose

• Disconnect power to the appliance before starting any repair
• Drain water and remove any clips or clamps carefully to avoid damaging adjacent components
• Inspect and replace associated clamps or seals as needed for a secure, leak-free connection

This spring-style hose clamp secures flexible water hoses to fittings to help prevent leaks and keep connections tight. It's a simple replacement that restores a proper seal at the hose connection. What it does:

• Compresses around a hose to hold it firmly on a tailpiece or barb
• Helps stop leaks or drips caused by loose or worn clamps
• Restores proper clamping force when original clamp is corroded or stretched
• Common symptom: visible water at the hose connection or water pooling under the appliance

• One spring-style hose clamp

• Disconnect power and shut off the water supply before servicing
• Slide clamp onto hose, push hose fully onto the fitting, then position clamp over the barb
• Use pliers to expand the clamp, seat it, and release to lock; avoid over-compressing the hose
• Replace any damaged hoses or fittings and test for leaks after restoring water and power

This outer tub replaces the washer's outer wash tub that holds the inner drum and directs water during cycles. Installing a new outer tub restores the washer's ability to contain water and maintain proper drum alignment. What it does:

• Houses and supports the inner tub/drum so laundry spins safely
• Directs wash and rinse water to the drain path
• Prevents leaks when intact; cracks or damage can allow water to escape
• Helps maintain correct drum alignment to reduce noise and vibration

• One outer tub

• Disconnect power and water supply before starting work
• May require disassembly of the cabinet, inner tub, and associated seals; follow OEM instructions
• Inspect and replace related seals, gaskets, or fasteners as needed

This door glass is the clear replacement glass for the front washer door, restoring visibility and a watertight barrier so you can safely view loads and keep laundry contained during cycles. What it does:

• Replaces cracked, chipped, or shattered front washer door glass
• Restores a clear viewing window so you can monitor the wash without opening the door
• Helps maintain a proper seal to prevent water leaks when installed with intact door gaskets
• Preserves safety and integrity of the door assembly when tempered glass is used

• 1 door glass

• Disconnect power and turn off water supply before beginning work
• Handle glass carefully; wear protective gloves and eye protection
• Removal typically requires taking the door or door panel off the hinge and separating the trim; follow your model's service manual

This rear cabinet panel replaces the damaged or missing back enclosure on compatible Whirlpool laundry appliances, restoring protection and support for internal components. It helps quiet rattles and keeps insulation and wiring covered for safe operation. What it does:

• Replaces the appliance's rear enclosure to protect internal parts from dust and damage
• Restores cabinet rigidity and reduces vibration-related noise
• Covers wiring, insulation, and vent openings to maintain proper airflow paths
• Helps prevent debris and pets from entering the appliance's rear area

• Disconnect power (and gas if applicable) before beginning any repair
• Remove the appliance from its installation area and place on a stable surface for access
• Use basic hand tools; support the cabinet while removing and reinstalling fasteners

This small black clamp secures a hose, tube or wiring harness to prevent movement and abrasion. It's a direct-fit replacement used to keep connections stable so lines stay routed and protected during normal appliance operation. What it does

• Holds small hoses, tubing or wiring harnesses firmly in place
• Prevents chafing and accidental disconnection from vibration or movement
• Helps maintain routing to reduce stress on attached components
• Commonly used where a compact, non-corrosive clip is required

• Disconnect power before servicing any electrical appliances
• Use appropriate hand tools; avoid over-tightening which can damage hoses