We use cookies and similar tools for site analytics and advertising. By using our site, you agree to this. See our Privacy Policy for details. Do Not Sell or Share My Personal Information
Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The washer baffle set consists of curved plastic or metal lifters inside the wash drum that agitate clothes during the wash cycle. These components lift and tumble clothing to ensure thorough cleaning and prevent tangling. Replace them when clothes don't get clean properly, you hear scraping noises, or the baffles are cracked or missing.
To start my Maytag MAH8700AWW started making a thumping noise and was eating at the door boot seal. I started doing research and found some folks changed the shocks and springs but had no luck so I thought I would wait it out to see if it would get worse. Sure enough it started to get so loud I thought it was going through the wall. At this point I decided to tear into it. Come to find out the main shaft assembly had broken two out of the three arms that are the main supports for the inner... Read more
I had to do this by myself and I knew the drum assembly is very heavy. I had watched a video online where they used a strap to hold up the drum. However, my drum had nothing to hook to. So, since I had the front and back off, I slid a 2x4 under the drum from front to back, supported the front of the 2x4, and then lifted the drum with a hydraulic floor jack from the back. After raising the drum the appropriate height, exchanging the springs was very easy..... Read more
Removed the top panel, control panel, front panel and door seal. Sensor is underneath the drum and pulls out of a rubber grommet. Replacing is the same process in reverse. Helpful hit is that a couple little dabs of dishsoap on the metal lip helps a ton when putting the door seal back on, wouldn't hurt putting some on the sensor when slipping it back into the grommet either. Read more
I removed the door from the washing machine (4 Phillips head screws) I removed the outer plastic retainer ring, that holds the glass in place, took out broken glass, installed new, reinstalled the retainer ring, reattached the door to the machine and we were back ready to wash clothes. Read more