Pcfs1nfwass Parts

This water inlet valve assembly controls water flow to the dispenser and ice maker, restoring proper fill and dispensing when the valve is the source of the problem. Replaces a failed or leaking inlet valve to resume normal water delivery. What it does

• Opens and closes to let water into the ice maker and dispenser when signaled
• Stops water flow when closed to prevent continuous filling or flooding
• Commonly linked to no water dispensing, slow/weak fill, or intermittent filling of ice maker
• Helps stop leaks or drips when the internal valve seat is failing

• One water inlet valve assembly

• Disconnect power and shut off water before replacing to avoid electrical shock and flooding
• Verify water supply line is depressurized and dry before disconnecting fittings
• Tighten plumbing connections to the manufacturer torque recommendations; check for leaks after installation

This slide and bracket assembly restores smooth, supported movement for a refrigerator or freezer drawer. It replaces a worn or broken glide and helps the drawer open and close properly for reliable food access. What it does

• Provides the sliding track and mounting bracket that support a refrigerator/freezer drawer
• Restores smooth glide and proper alignment when original slide is bent, cracked or worn
• Helps eliminate drawers that stick, sag or fall out when opened
• Supports the drawer weight and guides it into place during use

• One slide and bracket assembly as shown

• Disconnect power to the appliance or remove food before starting to reduce risk of injury
• Typical install requires removing the drawer to access and replace the slide and bracket; retain screws or clips for reuse only if in good condition
• Inspect mating parts (drawer edges, cabinet track) for damage and replace if needed to ensure proper fit

This replacement pan-head screw is used in refrigerators to fasten panels, brackets, and covers so they stay tight and properly aligned. Replace a missing or damaged screw to restore a solid, rattle-free fit.

• Secures interior/exterior panels, brackets, trim, and covers
• Replaces missing, stripped, or corroded hardware
• Helps maintain proper alignment of attached components

• Disconnect power before servicing; shut off water if working near water lines
• Match location to the original fastener and start threads by hand to avoid cross-threading
• Do not overtighten, especially into plastic or thin sheet metal

• Thread size: #8-18 (type AB)
• Length: 1/2 inch
• Head style: Pan head, Phillips drive

This 10-32 x 1/2 machine screw secures appliance components where a standard 10-32 fastener is required. It restores proper mounting and reduces vibration or loose panels for reliable, quiet operation. What it does:

• Secures panels, brackets, or components that use a 10-32 threaded hole
• Prevents rattling, misalignment, and intermittent contact caused by loose fasteners
• Maintains electrical or mechanical connections when used as the OEM-specified screw
• Helps restore fit and finish after repair or disassembly

• Use the correct 10-32 driver (Phillips or slotted depending on head) and hand-start the screw to avoid cross-threading
• Tighten until snug; avoid over-tightening to prevent stripping threads or cracking plastic parts
• Replace only with the same size and thread spec to ensure proper fit
• Disconnect power if working near energized components or wiring

This basket wire is the molded metal rack that holds and organizes frozen food in the freezer compartment, restoring stable storage and easy access to items. Designed to match the original fit and function. What it does:

• Provides a sturdy shelf to store and organize frozen food items
• Prevents items from shifting during door opening and closing
• Restores usable storage space when the original basket is bent, broken, or missing
• Helps maintain airflow by keeping contents off the floor of the freezer

• Remove all food and unplug the appliance or turn off power before servicing
• Typically slides into molded tracks or hooks into support brackets; align and seat securely
• Inspect surrounding trim and supports for damage and replace if needed

This pivot is the replacement pivot piece that supports and guides a refrigerator door or sliding drawer, restoring proper alignment for smooth opening and closing. Fits original equipment pivot points. What it does:

• Supports the weight of a door or drawer and keeps it aligned on its track
• Guides smooth opening and closing and prevents binding or sagging
• Restores proper contact and seal when a worn pivot causes misalignment
• Helps reduce noise from loose or worn pivot points

• Disconnect power to the appliance before beginning any repair
• Access may require removing interior panels, trim, or the drawer/door per model instructions
• Handle carefully to avoid scratching sealed surfaces; replace worn fasteners if needed
• If alignment issues persist after replacement, check related hinges, tracks, and mounting hardware

This flow meter is a dishwasher water flow sensor that measures incoming water to help the control manage cycle fill and wash performance. Replaces a failed or intermittent flow reading to restore proper water-level sensing. What it does:

• Senses and reports water flow to the dishwasher control so fill and wash cycles operate correctly
• Commonly linked to symptoms like improper filling, error codes related to water flow, or interrupted cycles
• Helps the control detect low or no flow conditions that can halt cycles for safety
• Works as the direct replacement component for the dishwasher's flow-sensing assembly

• One flow meter

• Disconnect power and water supply before servicing to avoid shock and flooding
• Handle the sensor and wiring gently; avoid kinking or stressing the harness during replacement
• Verify tight, leak-free connections to the inlet and control after installation

This tuckaway shelf assembly replaces the fold-down shelf that stores and supports items while allowing extra vertical space when folded up. It restores the shelf's folding function so you can fit taller items or keep standard items organized. What it does:

• Provides a fold-up shelf surface that supports food and containers inside the refrigerator
• Folds up/out of the way to create clearance for taller items on lower shelves
• Secures into a stable position when extended to hold everyday loads
• Helps keep refrigerator contents organized and accessible

• Unplug the refrigerator or disconnect power before beginning service
• Empty and remove surrounding shelves or items for safe access
• Handle shelf components carefully to avoid chipping or cracking
• Follow OEM instructions for proper alignment and secure mounting

This module shelf secures the appliance's control or module assembly inside the freezer, keeping electronics stable and protected for reliable operation. It replaces a cracked or missing support and restores proper component positioning. What it does:

• Holds and supports the control/module assembly or related electronics inside the freezer compartment
• Prevents module shifting that can cause loose wiring or intermittent connections
• Helps maintain proper airflow around components by keeping parts in their intended position
• Reduces rattle and vibration noise from loose internal modules

• Disconnect power to the appliance before beginning any work to avoid electrical shock
• Access may require removing interior shelves, drawers, or a rear access panel—refer to your model's service instructions
• Handle electronic modules and connectors carefully; avoid pulling on wiring

This 6-22 pan head Phillips screw (3/8 in) secures panels and trim on compatible appliances, providing a reliable fastener replacement for loose or missing hardware. It's a small but essential part for stable assembly. What it does:

• Fastens panels, brackets, trim, and light housings in appliance assemblies
• Restores secure mounting when screws are missing, stripped, or worn
• Reduces rattling, movement, or gaps caused by loose fasteners
• Matches common 6-22 thread applications found on many appliance components

• Turn off and unplug the appliance before replacing hardware to avoid injury
• Use a correctly sized Phillips screwdriver to avoid stripping the head
• Inspect mating threads or inserts for damage; replace damaged inserts before installing
• Tighten securely but avoid over-torquing, which can strip threads or crack plastic

This replacement painted #8-18 screw secures panels and components on select appliances, restoring proper fit and reducing vibration. Use it when original fasteners are missing, stripped, or corroded to help keep parts aligned and stable. What it does:

• Fastens trim, panels, brackets, and small components in appliance assemblies
• Replaces stripped, rusted, or missing #8-18 fasteners that cause loose parts
• Helps eliminate rattles and misalignment from loose or damaged screws
• Matches the painted finish for a cleaner, OEM-like appearance

• Use the correct driver bit and avoid over-torquing to prevent stripping
• Inspect mating threads and replace if damaged before installing
• Disconnect power to the appliance if working near electrical components; follow all safety precautions

This is a 10-32 machine-thread screw used to secure appliance panels, trim, and components. It replaces missing or damaged fasteners so parts fit tightly and operate without rattles or misalignment. What it does:

• Fastens panels, brackets, or assemblies that use a 10-32 machine screw
• Restores secure mounting where a stripped, missing, or corroded screw causes looseness
• Helps eliminate vibration noise or gaps caused by loose hardware
• Matches OEM thread size and length for correct fit in designated mounting holes

• One 10-32 x 5/16 machine screw

• Disconnect power and remove power source or batteries before servicing appliances
• Use the correct screwdriver or nut driver to avoid stripping the head
• Thread carefully; do not force or overtighten to prevent thread damage
• Replace any damaged mating hardware or clipped inserts for a secure repair

This stainless-steel handle fastener secures the appliance door handle to the door assembly, restoring a solid, rattle-free grip and proper handle alignment. Designed to replace a worn, loose, or missing fastener quickly and easily. What it does:

• Secures the door handle to the appliance door so the handle stays firmly attached
• Stops handle wobble, clicking, or partial detachment when opening or closing the door
• Restores proper handle alignment and feel after a stripped or corroded fastener
• Matches OEM finish for a consistent look with stainless-steel handles

• One stainless-steel handle fastener

• Disconnect power to the appliance before beginning any repair
• Access may require removing the handle or inner trim; follow for guidance
• Use appropriate hand tools and tighten the fastener until snug—do not over-torque