Pdw 8680J00ss Parts

This right-side cabinet support secures and aligns the appliance cabinet for proper door and panel fit, helping restore stable operation and reduce cabinet movement or gaps. It's a direct-fit replacement designed to reinstall quickly with common tools. What it does:

• Provides structural support for the appliance cabinet on the right side to prevent sagging or misalignment
• Keeps panels and doors properly aligned to stop rubbing, uneven gaps, or poor sealing
• Restores stable mounting points for attached components and hardware
• Helps reduce vibration or movement that can occur when cabinet supports are worn or damaged

• Disconnect power (and water, if applicable) before starting any repair
• Remove outer panels or trim as needed to access the right-side support; keep fasteners organized
• Use basic hand tools; verify orientation and fit before tightening all fasteners
• Replace with OEM-approved parts for secure installation

Replaces a damaged, faded, or missing nameplate on your refrigerator. This cosmetic faceplate displays model information on the exterior cabinet.

Seals the lower edge of your dishwasher door to prevent leaks during wash cycles. Replace if cracked, worn, or causing water on the floor.

The Fine Filter Hub Nut is an OEM part for GE dishwashers. It secures the fine filter in place, ensuring that debris and food particles are effectively filtered out during the wash cycle, preventing them from re-entering the dishwasher tub.

Causes of a bad fine filter hub nut can include wear and tear from regular use, damage from over-tightening, or cracking due to impact. A faulty hub nut can lead to improper filtration, causing debris to circulate and potentially clog the dishwasher.

Symptoms of a bad Fine Filter Hub Nut include:

• Poor cleaning results with food particles left on dishes
• Unusual noises during the wash cycle
• The filter becoming loose or not staying in place

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

 The Upper Arm Spray Assembly is an OEM part for GE dishwashers. It is responsible for distributing water evenly throughout the dishwasher during the cleaning cycle, ensuring all dishes are thoroughly cleaned. The arm measures approximately 11 inches long.

You should replace the upper arm spray assembly if it becomes clogged, damaged, or worn out. Causes of a bad spray assembly can include mineral buildup from hard water, food particles blocking the spray holes, or physical damage such as cracks or breaks.

Symptoms of a bad upper arm spray assembly include:

• Poor cleaning performance, with dishes coming out dirty
• Uneven water distribution inside the dishwasher
• Visible cracks or blockages in the spray arm
• Unusual noises during the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Silverware Basket Assembly is an OEM part for GE dishwashers. This removable stainless steel tray holds and organizes silverware during wash cycles. Its perforated construction allows full saturation yet secure retention of flatware items.

Causes of a bad silverware basket can include damage or warping of the steel material over time. Mineral buildup hindering drainage may also impact cleaning effectiveness.

Symptoms of a bad silverware basket assembly include:

• Difficulty loading or removing silverware items smoothly
• Inability to securely hold flatware in place during cycles
• Undesirable pooling or retained water after cycles complete
• Trapped food debris affecting cleanliness

This genuine GE part is also compatible with Hotpoint, RCA and some Kenmore dishwasher models.

The Upper Spray Arm Bearing is an OEM part for GE dishwashers. It supports the upper spray arm, allowing it to rotate smoothly and distribute water evenly throughout the dishwasher. This ensures that all dishes receive a thorough cleaning during each cycle.

Over time, the upper spray arm bearing can wear out or become damaged. Causes of a bad bearing can include repeated use, mineral buildup from hard water, or physical damage due to mishandling.

Symptoms of a bad Upper Spray Arm Bearing include:

• The upper spray arm not rotating properly
• Ineffective cleaning of dishes on the upper rack
• Unusual noises during the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Interlock Switch Assembly is an OEM part for GE dishwashers. It is designed to ensure the dishwasher door is securely closed before the wash cycle begins, preventing leaks and ensuring the appliance operates safely.

Causes of a bad interlock switch can include wear and tear from frequent use, electrical issues, or physical damage to the switch or its housing. A malfunctioning switch can prevent the dishwasher from starting or cause it to stop mid-cycle.

Symptoms of a bad door interlock switch assembly include:

• Dishwasher not starting
• Interruption of wash cycles
• Door not latching securely
• Error codes related to door latch issues

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Latch Assembly is an OEM part for GE dishwashers. This part secures the dishwasher door during operation, ensuring that the door remains tightly closed to prevent water leaks and to allow the dishwasher to operate correctly.

Common causes of a bad latch assembly include wear and tear from regular use, damage from forceful closing or impacts, and issues with the internal mechanism or switches.

Symptoms of a bad Latch Assembly include:

• The dishwasher door not closing or latching properly
• The dishwasher not starting or pausing mid-cycle due to the door not being securely latched
• Water leaking from the door during operation
• The door popping open during a cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.