Pdw1860nss Parts

This ST3.5 tapping screw is a factory-style fastener used to secure appliance panels, trim, and components where a self-tapping thread is required. It provides a reliable hold for repairs and replacement parts. What it does:

• Creates its own mating threads in sheet metal or plastic to fasten panels and brackets
• Commonly used to secure control panels, trim pieces, and interior components
• Helps stop rattles and loose panels when the original screw is missing or damaged
• Matches OEM fit and function for straightforward replacement

• Use the correct ST3.5 screwdriver or bit to avoid cam-out and damage
• Start straight and apply steady pressure; do not force if resistance indicates wrong thread fit
• Avoid over-tightening to prevent stripping the mating material or breaking the screw
• Wear eye protection and follow appliance power/disconnect safety before servicing

This is a replacement handle screw that secures appliance door and control handles, restoring a tight fit and preventing handle wobble or loss. Use it to replace stripped, missing, or broken mounting screws for a secure repair. What it does

• Secures the appliance handle to the door or trim to stop wobbling or rattling
• Replaces missing or stripped screws that prevent the handle from staying attached
• Restores proper handle alignment and prevents accidental handle detachment
• Simple hardware replacement that addresses common handle looseness symptoms

• Disconnect power and water before starting any repair
• Use the correct screwdriver to avoid stripping the screw head
• Thread carefully and tighten until snug — do not overtighten
• If the original mounting hole or insert is damaged, assess and repair the base material before installing

A replacement joint pin that secures a hinge or linkage, restoring stable door or panel movement. Use this durable metal pin to fix loose, sagging, or misaligned doors and ensure reliable operation. What it does:

• Acts as the pivot/fastener for a hinge or linkage assembly to maintain correct alignment and motion
• Restores secure door or panel attachment when the original pin is worn or missing
• Helps eliminate sagging, rubbing, or uneven closing caused by a broken or loose pivot
• Works with the associated hinge and bracket to keep moving parts aligned during normal use

• Designed for direct replacement—remove the old pin and press or slide the new pin into the hinge or linkage assembly
• Use basic hand tools; wear gloves and eye protection to avoid injury from sharp edges or slipping tools
• Do not force damaged hinge parts—replace any broken brackets or worn components for a secure repair

The Upper Dishrack Stud and Roller Assembly is an OEM replacement part for GE dishwashers. This assembly is an integral component that supports the upper dishrack during dishwashing cycles. This dishwasher upper rack roller includes the axle for mounting.

Symptoms of a bad upper dishrack assembly include: 

• Improper leveling or tilting of the upper dishrack during operation
• Increased noise or rattling sounds coming from the dishrack
• Difficulty smoothly sliding or removing the dishrack 

Causes stem from normal wear over time, as continuous use can degrade guide rollers and mounting studs.

This OEM GE part is compatible with some Hotpoint, RCA, and select Kenmore models.

The Silverware Basket Assembly is an OEM part for GE dishwashers. This removable stainless steel tray holds and organizes silverware during wash cycles. Its perforated construction allows full saturation yet secure retention of flatware items.

Causes of a bad silverware basket can include damage or warping of the steel material over time. Mineral buildup hindering drainage may also impact cleaning effectiveness.

Symptoms of a bad silverware basket assembly include:

• Difficulty loading or removing silverware items smoothly
• Inability to securely hold flatware in place during cycles
• Undesirable pooling or retained water after cycles complete
• Trapped food debris affecting cleanliness

This genuine GE part is also compatible with Hotpoint, RCA and some Kenmore dishwasher models.

The Latch Assembly is an OEM part for GE dishwashers. This part secures the dishwasher door during operation, ensuring that the door remains tightly closed to prevent water leaks and to allow the dishwasher to operate correctly.

Common causes of a bad latch assembly include wear and tear from regular use, damage from forceful closing or impacts, and issues with the internal mechanism or switches.

Symptoms of a bad Latch Assembly include:

• The dishwasher door not closing or latching properly
• The dishwasher not starting or pausing mid-cycle due to the door not being securely latched
• Water leaking from the door during operation
• The door popping open during a cycle

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a door hinge spring that is used on dishwashers. This dishwasher door hinge spring prevents the dishwasher door from dropping open or slamming shut. It allows the movement to be controlled and smooth rather than abrupt and forceful. Each dishwasher unit has two springs at the bottom, one on each side.A new dishwasher door hinge spring may be needed if the dishwasher door is dropping open without any resistance or if it is slamming shut without any resistance. The springs provide tension to prevent these opening and closing concerns, so if that tension is missing, it is time to replace the springs on the dishwasher door.This is a genuine General Electric part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific dishwasher door hinge spring is compatible with dishwashers that are manufactured by the General Electric brand.