Pdw7800jo1-Bb Parts

This tub trim flange is the replacement trim that snaps around the washer tub opening to cover the edge and restore the appliance's finished appearance. It helps maintain a proper seal and prevents fabric snags and water spray at the tub lip. What it does:

• Covers and protects the exposed tub edge for a clean, finished look
• Helps keep the door seal aligned and reduces risk of water spray from the tub opening
• Prevents clothing from catching on rough or damaged tub edges
• Replaces cracked, broken or warped trim that can cause cosmetic and sealing issues

• Disconnect power and turn off water supply before starting any repairs
• Remove the outer panel or door opening trim as needed to access the tub flange
• Carefully pry out the old trim and snap the new flange into place, ensuring even seating around the tub
• If you find additional damage to the seal or surround, inspect and replace those parts as needed

This trim tub flange restores the finished edge around the washer tub opening, covering the gap between the tub and door for a clean seal and smooth appearance. It helps prevent snags and keeps the cabinet opening protected. What it does:

• Covers and protects the tub opening edges, improving appearance and reducing fabric catch points
• Helps keep the door seal aligned and reduces airflow around the door opening
• Commonly replaced when the trim is cracked, warped, or missing, or when it no longer secures properly
• Fits onto the tub face and secures with factory fasteners or clips

• One trim tub flange

• Disconnect power and water before starting any repair
• Remove the door and any retaining screws or clips to access the trim; retain fasteners for reassembly
• Inspect the door boot/seal and surrounding components for wear while replacing the trim

This flapper vent is the replacement exhaust flap that helps control dryer airflow and keeps outside air, pests and debris from entering the vent when the dryer is off. Fits many GE dryer exhaust housings. What it does

• Opens during dryer operation to let moist air escape and closes when the dryer is off to block backdrafts.
• Restores proper airflow when a damaged or stuck flap is preventing venting.
• Helps reduce outside odors, drafts and pest entry through the exhaust opening.
• Works as a simple mechanical replacement—no electrical connections.

• Disconnect the dryer from power and, if applicable, turn off gas before servicing.
• Access the exterior vent or the dryer exhaust housing; replacement typically secures with screws or snaps into the vent housing.
• Inspect and clean the vent duct and housing before installing the new flap to ensure proper operation.

This is a replacement fastener screw used to secure panels and components on compatible appliances, restoring proper fit and reducing movement. It's a simple, direct replacement when an original screw is missing or damaged. What it does:

• Secures access panels, covers, or internal components to prevent rattling and movement
• Helps maintain proper alignment of parts so doors and panels close correctly
• Replaces missing, stripped, or broken screws that can cause loose parts or noise
• Restores the appliance's original fit where a matching OEM fastener is required

• One replacement screw

• Turn off and unplug the appliance before starting any repair
• Use the correct driver and avoid over-tightening to prevent stripping threads
• If the original screw was holding electrical components, ensure power is disconnected and follow OEM safety instructions

This is a control panel for dishwashers. This part features all of the controls for the appliance. It has buttons to run the washing cycles including the rinse cycle, glasses cycle, china crystal, and normal wash. This particular part has a stainless steel finish.Over time, the buttons may wear out so that the user can no longer read what the functions are. This can happen due to normal wear and tear. Replacing this bowed escutcheon will fix this issue. If it becomes cracked or broken for any reason, this will be a genuine replacement part. Disconnect the dishwasher from its power source prior to beginning the replacement process.This is a genuine OEM part that is sourced directly from the manufacturer. It is sold individually. This specific bowed escutcheon is compatible with dishwashers that are manufactured by General Electric.

Color: Bisque

Color: White

 The Upper Arm Spray Assembly is an OEM part for GE dishwashers. It is responsible for distributing water evenly throughout the dishwasher during the cleaning cycle, ensuring all dishes are thoroughly cleaned. The arm measures approximately 11 inches long.

You should replace the upper arm spray assembly if it becomes clogged, damaged, or worn out. Causes of a bad spray assembly can include mineral buildup from hard water, food particles blocking the spray holes, or physical damage such as cracks or breaks.

Symptoms of a bad upper arm spray assembly include:

• Poor cleaning performance, with dishes coming out dirty
• Uneven water distribution inside the dishwasher
• Visible cracks or blockages in the spray arm
• Unusual noises during the wash cycle

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.