Pfd95gspwds Parts

8-18 hi/lo 5/8

This resilient mount clip cushions and isolates appliance components to reduce vibration and noise while keeping parts aligned during operation. It's a direct-fit mounting clip used where a rubberized isolator is required. What it does:

• Absorbs and dampens vibration between chassis and attached components to help reduce noise
• Holds motor, blower or assembly securely in place to prevent misalignment and wear
• Helps keep attached parts from transferring shock to the cabinet during operation
• Commonly replaced when you notice increased vibration, rattling or loose-mounted components

• Unplug the appliance and disconnect power before any repair
• Support the component being removed to prevent it from falling or shifting
• Use basic hand tools; avoid over-tightening fasteners that can compress the isolator
• Inspect surrounding mounts and hardware and replace if worn or damaged

Fix a dryer that won't start or power on with a new power cord. Connects your dryer to the wall outlet for safe electrical operation. Easy install.

This sensor rod harness connects a temperature sensor to the appliance wiring, restoring proper signal transmission for accurate temperature monitoring and control. It's a direct-fit replacement when the original harness is damaged or intermittent. What it does:

• Provides the electrical connection between the sensor rod and the control board to transmit temperature readings.
• Replaces frayed, burned, or broken wiring that can cause intermittent or no temperature readings.
• Helps resolve symptoms such as erratic temperature control, long heating/cooling cycles, or fault codes related to sensor circuits.
• Maintains secure, insulated connections to prevent shorting or open circuits.

• One sensor rod harness.

• Disconnect power to the appliance before beginning any repair to avoid electric shock.
• Access may require removing panels or components; handle sensors and wiring gently to avoid damage.
• Verify connector orientation and secure clips fully; do not force connectors.

Fix dryer drum rubbing, scraping, or loud operation with this front drum support assembly. Centers and supports the drum for smooth, quiet rotation.

A Belleville nut is a conical spring-style washer that provides axial tension and helps maintain a secure fastening under vibration and thermal cycling. It prevents fasteners from loosening so components stay mounted and aligned. What it does:

• Acts as a spring washer to keep bolts and studs under constant tension
• Helps prevent fasteners from backing out due to vibration or thermal changes
• Restores proper clamp force when a standard flat washer no longer holds
• Commonly used where a compact, high-load spring washer is required

• One Belleville nut

• Disconnect power to the appliance before servicing and follow all safety precautions
• Install on the correct fastener and seat the cone so it provides axial spring force
• Do not reuse if visibly deformed, corroded, or cracked
• Avoid over-tightening; snug to manufacturer torque specification when available

Fix no heat or weak flames with this dryer gas supply pipe. Connects gas system components to burner assembly, restoring proper fuel flow and heat.

This burner assembly replaces a damaged or worn surface burner on compatible gas cooktops, restoring reliable heating for everyday cooking. It provides a direct fit replacement to help get burners heating evenly and properly. What it does

• Delivers gas to the cooktop burner so pots and pans heat correctly
• Restores even flame distribution for consistent cooking results
• Helps resolve burners that produce weak or uneven flames
• Works with the cooktop ignition system when the burner assembly is intact

• Turn off gas supply and power to the appliance before servicing
• Handle with care to avoid bending or damaging the burner ports and mounting tabs
• Inspect gaskets/seals and replace if damaged to prevent leaks

Size: 8 - 18 ab.

Exposed wiring at terminal block? This safety cover shields high-voltage connections from accidental contact. Restores factory protection in minutes.

This main wiring harness routes power and control signals between the range/oven control system and the gas components, helping the appliance ignite and regulate burners and the oven safely. Replaces a worn or damaged gas harness. What it does

• Connects the control board/clock to gas valves, igniters, and sensors so burners and oven ignition operate.
• Transmits power and low-voltage signals required for timed ignition and safety interlocks.
• A damaged harness can cause burners or oven not to ignite, intermittent heating, or control-related error codes.
• Restores reliable electrical paths when insulation, terminals, or wiring are broken or corroded.

• One main wiring harness (gas) as shown.

• Disconnect electrical power and shut off the gas supply before starting work.
• Handle connectors carefully; match keyed plugs and route harness to avoid pinching or contact with hot surfaces.
• Inspect terminals and mounting clips; replace any damaged fasteners to prevent chafing.

Fix a dryer that won't power up or start with this main control board. Common solution for complete power failure. Includes installation instructions.

Dryer idler spring provides tension to maintain proper drum rotation. Replace if cracked, broken, or loose to restore tumbling function. Confirm fit with model.

The Wire Tie is an OEM part for GE dryers. It is used to secure and organize internal wiring, ensuring that wires remain properly positioned and do not interfere with the operation of the dryer. This part plays an important role in preventing wires from becoming tangled, pinched, or damaged during the dryer’s cycles.

Over time, the wire tie can become worn out, broken, or damaged due to prolonged exposure to heat, vibrations, or wear from normal use. A compromised wire tie can lead to loose or unsecured wiring, which may impact the performance of the dryer or cause electrical issues.

Symptoms of a bad Dryer Wire Tie include:

• Loose or unsecured internal wiring
• Interference with dryer components during operation
• Electrical malfunctions or short circuits
• Wires appearing frayed or damaged due to improper support

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.