Pfe29pcsdcss Parts

A threaded mounting bolt that secures the compressor to the refrigerator's frame, providing vibration dampening and structural support. Replace when you hear excessive compressor noise, vibration, or notice the compressor appears loose or misaligned.

Seals the air damper to maintain proper airflow between refrigerator compartments. Replace if temperatures fluctuate or frost builds up. Confirm fit with your model number.

Refrigerator plug button that installs in the cabinet or liner. Replace this insert if the original is cracked, broken, missing, or worn from use.

This center track guides and supports the fresh-food door drawer, helping the drawer slide smoothly and stay aligned for reliable access and seal. Replaces a worn or damaged center track to restore normal movement and alignment. What it does:

• Provides a stable sliding surface for the fresh-food drawer/door
• Restores smooth opening and closing when original track is worn or cracked
• Helps maintain proper door alignment to reduce gaps that can affect cooling
• Common symptom: drawer sticks, jams, or tilts during operation

• One center track for the fresh-food drawer/door

• Turn off power to the appliance before beginning any service
• Access usually requires removing the drawer/door assembly and fasteners; keep hardware organized
• Inspect companion tracks and rollers; replace any worn pieces to ensure smooth operation

Stabilizes and aligns your refrigerator's left door assembly. Replace if you notice door sagging, poor sealing, or rubbing noises. Confirm fit with your model.

This is a replacement M4 machine screw for securing appliance components and assemblies. It restores proper fit and prevents vibration or loose parts when a small mounting screw is missing or stripped. What it does

• Fastens small panels, brackets, or electronic modules in place
• Restores secure mounting to reduce rattles, vibration, or intermittent connections
• Replaces lost, worn, or stripped original fasteners
• Useful during control board or housing repairs where factory screws are removed

• One M4 x 1.59 machine screw, 10 mm length

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten snugly but do not overtighten; replace with exact screw size to ensure proper fit
• Keep small parts away from children and pets

This genuine replacement screw secures appliance panels and components where a short 8-18 x 1/2 in fastener is required, restoring proper fit and preventing rattles or loose parts. What it does:

• Secures panels, brackets, trim, and small components
• Restores tight fit where stripped or missing screws cause vibration or rattling
• Matches OEM thread and length for reliable fastening
• Prevents gaps that can trap dirt or interfere with operation

• One screw

• Use the correct Phillips screwdriver to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Disconnect power and remove any panels as required before working near electrical components
• Replace only with the exact OEM screw to maintain proper fit

This push-in fastener secures trim, panels, and plastic components on compatible appliances to prevent rattling and hold parts in place. Simple clip design keeps panels aligned without screws or specialized hardware. What it does

• Holds plastic trim, interior panels, and lightweight assemblies in place
• Replaces worn or broken push retainers that cause loose or vibrating panels
• Helps restore proper fit of door liners, kick plates, and interior housings
• Commonly used where a snap-in plastic retainer is required

• Push into the matching hole until the head seats flush; no tools typically required
• Inspect mating hole and surrounding material for damage before installation
• Remove power and follow appliance safety instructions when working near electrical components
• If fastener does not seat correctly, confirm correct part and hole size before forcing

This silicon controlled rectifier (SCR) is a replacement power-switching semiconductor that helps control high-current flow to heating elements or motors, restoring proper power regulation and appliance function. What it does:

• Acts as a high-current electronic switch on appliance control circuits to regulate power to heating elements, motors, or similar loads
• Allows the control board to turn high-voltage circuits on and off with low-voltage signals
• Failure can cause no heat, intermittent heating, loss of power to a controlled component, or erratic operation
• Designed to handle repeated switching cycles under normal appliance operating conditions

• One silicon controlled rectifier module

• Disconnect all power before servicing to avoid shock or injury
• Handle as an electronic component; avoid static discharge and mechanical stress
• May require soldering or secure mounting to a heatsink or chassis—follow the appliance wiring diagram

This tube plug seals a small appliance tubing opening to stop leaks and keep water flowing only where it should. It's a simple, serviceable replacement for worn or missing plugs to restore a watertight seal. What it does

• Seals the end or service port of a water or refrigerant tube to prevent drips and leaks
• Helps maintain normal water flow by closing unwanted openings
• Commonly replaced when a plug is cracked, missing, or no longer seals
• Can reduce water damage and nuisance pooling near the appliance

• One tube plug

• Recommended for technicians or confident DIYers familiar with appliance water lines
• Turn off water supply and unplug the appliance before service
• Inspect mating tubing for damage; replace tubing if damaged to ensure a proper seal
• Use appropriate hand tools; avoid excessive force that could damage fittings

This wheel overmold assembly replaces a worn front wheel to restore smooth drum rotation and reduce noise. It mounts to the dryer front support to help the drum roll evenly and prevent metal-on-metal wear. What it does:

• Provides a cushioned wheel surface that supports the dryer drum and improves rotation
• Reduces squeaking, scraping and grinding caused by a worn or damaged front wheel
• Helps maintain proper drum alignment for even tumbling and reduced wear on seals
• Extends the life of the front support by preventing direct metal contact

• Disconnect power before beginning repair to avoid electrical hazard
• Access the front support assembly per your dryer's service instructions; inspect adjacent rollers and glides for wear
• Fit the overmold onto the wheel hub and secure per OEM guidance; verify smooth drum rotation before reassembly
• If other support components show wear, replace them to prevent premature failure

This louver duct channels return air in the freezer to the ice maker area, helping maintain proper airflow for ice production and consistent freezer temperatures. A direct-fit replacement for the freezer ice maker return duct. What it does:

• Directs cold airflow from the freezer to the ice maker/ice bin area
• Helps prevent localized frost buildup by controlling air movement
• Supports consistent ice production and even freezer cooling
• Replaces cracked, broken or missing ducts that cause air leakage or noise

• One louver duct (ice maker return)

• Disconnect power to the appliance before servicing
• Remove freezer liner or access panels as needed to reach the duct
• Handle plastic components carefully to avoid cracking; use the OEM fasteners where required

This heater bracket secures the appliance's heating assembly to the cabinet, keeping the element stable for reliable operation and reducing vibration. It's a direct-replacement mounting part that restores proper alignment of the heater. What it does:

• Holds the heating element or assembly in the correct position to prevent movement and chafing
• Helps maintain consistent heat delivery by keeping components aligned
• Reduces rattling or vibration caused by a loose heater assembly
• A damaged or missing bracket can allow the element to contact other parts, causing noise or intermittent heating

• One heater bracket

• Disconnect power to the appliance before starting any repair
• Use existing fasteners or OEM-recommended hardware; do not overtighten
• Watch for sharp edges and protect wiring and insulation while positioning the bracket

This USB port cover replaces a broken or missing cover on the appliance control panel to protect the USB connector from dirt and moisture. It restores a finished appearance and helps keep the port functional. What it does:

• Covers and protects the appliance USB port from dust, moisture, and accidental contact
• Prevents debris from entering the connector, reducing risk of connectivity issues
• Restores the control-panel appearance when the original cover is cracked or lost

• Disconnect power to the appliance before servicing to avoid shock or damage
• Accessible from the control panel; typically snaps into place or secures with small fasteners
• Inspect surrounding trim for damage and replace any broken clips to ensure a secure fit