Pfe29psdss Parts

This is a replacement #8-18 by 1/2-inch appliance screw used to secure panels, trim, and internal components. It restores proper fastening where the original screw is missing, stripped, or corroded. What it does:

• Fastens panels, brackets, trim pieces, and small components
• Restores secure mounting when a screw is missing or worn
• Stops rattling and vibration caused by loose or stripped fasteners
• Compatible with applications that call for a #8-18 x 1/2" screw

• One screw (8-18 x 1/2 in)

• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; stop when the component is snug to prevent damage
• If screw threads are damaged, replace with the correct thread size rather than forcing
• Disconnect power before working on electrical components or panels that expose wiring

This E-clip is a small metal retaining ring that secures shafts, pins, and other round components in appliance assemblies, helping keep moving parts properly seated and preventing unwanted disassembly. What it does:

• Clips onto a shaft or pin to hold components in place and maintain alignment
• Prevents parts from sliding off during operation, reducing noise and wear
• Common symptom: loose or rattling components where a retaining clip is missing or damaged
• Common symptom: assembly falling apart or not engaging correctly due to a failed clip

• One E-clip

• Small part — use needle-nose pliers or snap-ring pliers to install and keep fingers clear
• Disconnect power and/or water to the appliance before servicing to avoid injury
• Wear safety glasses to protect against the clip snapping during installation

The Top Freezer Basket Slide Bracket is an OEM replacement part for GE refrigerators. It is designed to securely hold the freezer basket slide in place, allowing for smooth and effortless movement when accessing items stored in the freezer. It provides stability and support to the basket, preventing it from tipping or falling out during use.

A bad top freezer basket slide bracket can occur due to regular wear and tear or accidental damage. If you notice symptoms such as a wobbly or unstable freezer basket, difficulty in sliding the basket in and out, or the basket not staying securely in place, it may indicate a need to replace this part.

Symptoms of a bad top freezer basket slide bracket include:

• Wobbly or unstable freezer basket
• Difficulty in sliding the basket in and out
• Basket not staying securely in place

Restore your freezer organization by replacing the faulty top freezer basket slide bracket with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This trough drain collects and channels defrost water from the freezer evaporator to the drain tube, helping prevent pooled water and icing in the freezer compartment. Designed to match OEM fit and function for a direct replacement. What it does

• Captures defrost meltwater from the evaporator area and directs it to the drain system
• Helps prevent water pooling and ice buildup around the evaporator and freezer floor
• Restores normal defrost drainage when original trough is cracked, warped, or clogged
• Works with the freezer's drain heater and drain tube to keep water flowing during defrost cycles

• One trough drain

• Remove power to the appliance before accessing the evaporator/freezer cavity
• Replacement may require partial disassembly of interior liners, shelves or evaporator cover; follow OEM service instructions
• Inspect and clear the drain tube and drain heater when replacing the trough to ensure full system function

This trough drain directs defrost water from the evaporator to the refrigerator drain system, helping prevent water buildup and puddling inside the freezer compartment. It's a direct-fit replacement for the damaged or cracked drain trough. What it does:

• Channels defrost and condensation water away from the evaporator area to the main drain
• Prevents ice buildup and water pooling that can lead to floor or compartment leaks
• Restores proper drain flow when original trough is cracked, warped, or clogged
• Works with the refrigerator's defrost cycle to keep the compartment dry

• One trough drain piece

• Disconnect power to the appliance before starting any work
• Remove stored food and secure shelving or trim that blocks access to the evaporator area
• Inspect and clear the drain path and drain tube while installing the new trough

This guide roller is the replacement wheel that supports and guides the refrigerator vegetable/crisper pan, helping the drawer slide properly and stay aligned for reliable access. Designed to restore smooth, stable drawer movement. What it does:

• Supports the vegetable/crisper pan and rides in the drawer track to keep the drawer aligned.
• Reduces binding or catching when opening and closing the drawer.
• Replaces worn or broken rollers that cause the drawer to tilt, jam, or make scraping noises.
• Helps maintain even weight distribution so the drawer opens and closes reliably.

• Disconnect power to the refrigerator before beginning any repair.
• Remove the vegetable/crisper pan/drawer to access the roller and replace the old roller with the new one.
• Use basic hand tools as required; follow OEM instructions for reassembly.

This left-side freezer holder slide secures and guides the freezer drawer for smooth opening and closing. Replacing a worn or broken slide restores proper drawer alignment and helps prevent sagging or sticking. What it does:

• Supports the freezer drawer on the left side and keeps it aligned during use
• Guides drawer movement for smooth opening and closing
• Replaces damaged, bent, or missing slides that cause binding or uneven drawer travel
• Helps prevent the drawer from sagging, slipping, or coming off its track

• Disconnect power before servicing to avoid electrical hazards
• Remove freezer contents and a drawer or panel as needed for access
• Compare the old slide to ensure correct left/right orientation before installing
• Use basic hand tools; do not force parts—replace any damaged mounting hardware

This gasket seals the fan-front housing in the appliance to help maintain proper airflow and reduce air bypass. Replacing a worn gasket restores a tight seal for more consistent cooling and quieter operation. What it does:

• Seals the fan/front housing to prevent air leakage that can disrupt airflow and cooling
• Cushions the fan assembly to help reduce vibration and noise caused by a loose or damaged seal
• Helps maintain proper circulation so the refrigeration system can run efficiently
• Can prevent moisture buildup and reduce frost in the fan area when sealing is restored

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Remove access panels or shelving as needed to reach the fan housing; keep hardware for reassembly
• Inspect the mating surfaces and clean away debris before installing the new gasket for a proper seal
• Repair those before installing the gasket

This cover connector secures the fan housing and wiring in the refrigerator's fan assembly, helping protect components and maintain proper airflow. It's a direct-fit replacement designed to restore correct fan enclosure alignment. What it does

• Holds the fan housing and wiring connectors in place to prevent rubbing or disconnection
• Protects fan assembly wiring from damage and helps maintain reliable airflow
• Can address symptoms such as intermittent fan operation, unusual fan noise from misalignment, or airflow-related cooling issues
• Works as part of the fan enclosure to keep components positioned for proper function

• Disconnect power before beginning any service to avoid shock or injury
• Installation typically requires removing the fan housing or access panel; handle plastic parts carefully to avoid breaking tabs
• Inspect adjacent wiring and fan blades for damage while replacing the connector

This diverter and badge assembly replaces the dispenser diverter on compatible refrigerators, restoring proper flow direction and the finished exterior badge for the dispenser area. It helps stop leaks and stabilizes the dispenser trim. What it does:

• Directs dispenser water/ice flow through the correct outlet to prevent misdirected dispensing
• Secures the dispenser badge/trim to the appliance front for a finished appearance
• Helps stop leaks or drips caused by a damaged or worn diverter
• Reduces wobble or looseness at the dispenser face when the badge/clamp is intact

• One diverter & badge assembly

• Disconnect power (and water supply if applicable) before beginning work
• Access may require removing the dispenser bezel or door trim—follow your model's service instructions
• Handle plastic components gently to avoid cracking; replace any damaged fasteners or seals

This door switch harness connects the door switch to the cabinet wiring to restore proper door-open/close signaling. It replaces a damaged or worn harness to help the appliance detect door position and enable interior lights or control features. What it does:

• Provides the electrical connection between the door switch and appliance wiring harness
• Restores interior light and control responses when the door opens or closes
• Replaces frayed, cracked, or disconnected wiring that can cause intermittent power or no light
• Helps eliminate clicking, dead lights, or controls that don't respond to door position

• One door switch wiring harness

• Disconnect power before beginning any repair to avoid shock; this is a high-priority safety step
• Handle connectors carefully; match connector shapes and wire colors when replacing
• May require removal of door gasket or inner door panel depending on appliance model

2 wire insulator.

This 8-18 x 3/4 machine screw fastens appliance panels and small brackets to keep components secure and stable. It's a direct-fit replacement screw used where the original hardware has stripped, broken, or gone missing. What it does:

• Secures access panels, mounting brackets, and small assemblies
• Restores proper alignment and reduces rattling or vibration
• Replaces stripped or damaged fasteners
• Keeps wiring and components held in place for safe operation

• Unplug the appliance or disconnect power before starting work
• Use the correct driver and size to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to parts
• Replace corroded or damaged fasteners for best results

This is a single #10-18 x 3/4 inch flat-head screw used to secure panels and components in appliances. It replaces worn or missing fasteners so parts stay properly mounted and aligned. What it does:

• Fastens appliance panels, brackets, and components with a flat-head finish for flush mounting
• Replaces stripped, rusted, or missing screws that cause loose or rattling parts
• Provides a secure threaded connection for consistent operation
• Compatible where a #10-18 thread, 3/4" length flat-head screw is specified

• One (1) screw, #10-18 x 3/4 in., flat head

• Use the correct screwdriver bit (flat or Phillips depending on head style) and avoid over-tightening to prevent stripped threads
• Disconnect power to the appliance and follow manufacturer safety procedures when accessing internal components
• Dispose of damaged hardware and replace with matching specifications for safe operation