Need Help?
Call
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Fridge running warm or uneven temps? This air tower assembly channels cold air through the refrigerator. Restores proper airflow and consistent cooling.
After checking the defrost heater to confirm it was ok. I replaced the main electronic board. That wasn't it. After 1 1/2 weeks, it frosted up again. I called and talked to a tech person at APP and then ordered the air tower, defroster thermostat, and temp sensor. I installed them all and the frig works great. I know replacing all those parts at once didn't confirm which one failed, but I just wanted it fixed. The cost was less than having a service call. The parts arrived the day after... Read more
Supplies electrical power from wall outlet to refrigerator. Replace this cord if cut, frayed, overheated, or damaged to restore safe electrical connection.
Spliced new and old power cord near the connections in the fridge and connected them. Didn't mess with the factory harnesses or connections inside actual fridge. Read more
Holds water filter securely and directs flow to dispenser or ice maker. Replace if filter won't stay sealed, water flow is slow, or leaks occur.
I ordered a filter housing, some plastic tubes to replace the leaking one and en extra connector which came really handy. I followed the videos and replaced parts pretty easily. It could have been done in as little as 15 minutes. But I started getting leaks and took me a while to play with water lines and changing connectors to stop the leak. Then I had to test it a few times to make sure it won't leak again. Read more
Refrigerator not cooling or running constantly? This compressor powers your cooling system. Advanced repair, allow 2-4 hours for replacement.
Replacement mounting screw for refrigerator panels, brackets, door handles, and trim. Needed when original hardware is missing, stripped, or corroded.
The Bulb Light is an OEM part for GE refrigerators. It is designed to illuminate the interior of the refrigerator and freezer compartments, making it easier to see and access food items. This light bulb fits securely into the designated socket and provides bright, reliable lighting to enhance visibility.
You should replace the bulb light if it burns out or becomes damaged. Causes of a bad bulb light can include regular wear and tear, electrical issues, or physical damage from impacts or vibrations. A faulty bulb can leave the refrigerator compartments dim or completely dark, making it difficult to find items.
Symptoms of a bad bulb light include:
This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
A friend had suggested your website and I can not say enough about it!!! I'm thrilled to say that my oven works now! I watched the video that you provide and I think that it was excellent to see as it prepared me for the task at hand. My element replacement was a little different than the video, but overall concept was the same. I wasn't even sure that it was the element that needed repair, but for the price you charge I was willing to take the risk. Delivery of the product was the next day... Read more
Size: 10-32 GXTT FLP.595 S
Great site to DIY! Purchased fresh produce drawer railing and parts. Fixed in under 10 minutes. Thanks so much! Read more
Ice maker not filling or water spilling? This fill cup directs water into the ice maker mold for proper ice production. Simple clip-on install.
Went online to appliance pro, found my model and the ice maker part number. The process was very easily. The order process was also very simple and the part was delivered promptly with installation instructions. Read more
Front mounting grommet for refrigerator ice makers. Secures ice maker assembly to freezer wall. Replace if cracked, missing, or worn to restore stability.
Replaced the housing the water filter screws into. Water works fine now. Read more
The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.
You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.
Symptoms of a bad R134 drier include:
Secures the evaporator fan assembly behind the rear freezer panel. Replace if cracked, rusted, or missing to restore proper fan mounting and clearance.
The problem was most likely the evaporator fan motor but it could have been a bad blade, loose parts or bad motor mounts. Hard to tell without taking everything apart and inspecting. Since fridge was 17 years old I decided to order the entire evaporator fan assembly as shown in the parts diagram including fan blade, motor brackets, motor, motor mounts, screws, etc. Getting to the assembly involved removing the ice maker unit plus the entire rear inside of the freezer section. Parts cost around... Read more
Fastens refrigerator panels, brackets, and internal components. Replace this screw if the original is missing, stripped, or damaged to restore secure mounting.
Quickly on the face grille. Dismantled ice tray and inserted auger. Everything is pretty obvious for dismantling except the spring in the rod on the bottom (pay attention to how it is attached to the rod) and the plastic screw on the front of the auger (use pliers to grip it and it is reverse thread). Read more
Hex head screw for refrigerator panels, brackets, and assemblies. Replaces missing, stripped, or rusted fasteners to secure components properly.
You sent us the correct kit and my husband fixed it. Read more
This glass or wire shelf is permanently mounted inside the fresh food compartment of the refrigerator to provide storage space. Replace when the shelf is cracked, broken, or no longer securely holds items due to damaged mounting brackets.
Ordered parts and fixed myself. Read more
8-18 CA HX 1/2 S
Replacement went good. The fan was perfect match. I am glad I ordered the two grommets, because the other ones were worn. I found this when dismantling. The blade was replaced as well. Read more
Mounting screw for refrigerator interior components like fan brackets, ice maker assemblies, and shelving. Replace if stripped, missing, or corroded.
Because I have had to replace this fan before, the process goes pretty fast.. I am impressed with AppliancePros for a number of reasons, the price for componets is always cheaper that other major parts suppliers. They go to great length to insure all ordered parts are shipped and in a timely fashion.. Also the live tutorials are a great help for the Doit yourselfer.. Read more
By continuing to use our site, you agree to our Terms of Usage and Privacy Policy. You can learn more about how we use cookies by reviewing our Privacy Policy.
We use cookies to optimize website functionality, analyze the performance, and provide personalized experience to you. Use the controls below to manage your privacy preferences.
Cross-Site Advertising
When enabled, we may use cookies and similar technologies to deliver personalized advertisements based on your browsing activity across different websites. Opting out will disable third-party advertising cookies on this site.
Analytics Sharing
When enabled, we may share anonymized browsing and usage data with third-party analytics providers to help us understand how visitors use our site. Opting out will prevent this data from being shared with third parties.