Pfq97hspvds Parts

This main wiring harness assembly routes power and signals between the control, motor, door switch and other dryer components to restore proper electrical connections and enable normal operation. What it does

• Replaces the dryer's primary wire harness that supplies power and control signals to internal components
• Restores connection to the control console, motor, door switch and safety interlocks
• Can resolve symptoms such as no power to the drum or controls, intermittent electrical failures, or a dryer that won't start
• Helps correct issues caused by damaged, burned, or disconnected wiring and connectors

• One main wiring harness assembly as shown

• Disconnect all power (unplug or switch off breaker) before starting work
• Take photos of original routing and connector positions to aid reassembly
• Route harness to avoid pinch points or contact with sharp edges and secure with existing clips/fasteners
• Reconnect all matching plugs fully; test operation after reassembly

This pump filter sits in the drain pump housing to trap lint, coins, and small debris before they reach the impeller. Replacing a worn filter and seal helps restore proper drainage and prevent leaks at the pump clean-out.

• Screens debris to protect the pump and maintain drain flow
• Helps address slow or no-drain complaints and water left in the tub after a cycle
• Can reduce leaks at the filter access when the cap or O-ring is damaged or missing
• Replaces cracked or stripped filter caps to restore a tight, secure seal

• Disconnect power and turn off the water supply before servicing.
• Open the pump access panel; place towels or a shallow pan to catch residual water.
• Turn the old filter counterclockwise to remove; clear debris and wipe the housing clean.
• Ensure the seal is properly seated; hand-tighten the new filter until snug. Run a short fill/drain test to check for leaks.

This lint filter handle seal strip replaces the worn or damaged rubber seal on a dryer lint screen handle to restore a snug fit and help keep lint contained. Replacing a split or missing seal improves seal contact and reduces lint escape. What it does:

• Provides a flexible rubber seal that fits over the lint filter handle edge to create a tighter contact with the dryer opening.
• Helps prevent lint and debris from bypassing the lint screen and collecting inside the dryer cabinet.
• Reduces gaps that can allow air leakage, which may affect dryer performance.
• Useful when the original seal is torn, hardened, missing, or no longer grips the handle securely.

• One lint filter handle seal strip (single piece as shown)

• Disconnect power to the dryer before service to avoid shock or injury.
• Remove the lint screen and peel off the old seal; clean the handle area before installing the new strip.
• Press the new seal strip firmly into place along the handle edge so it seats evenly; trim excess only if explicitly required by the OEM.

This latch cover protects and finishes the appliance door latch area while keeping the latch mechanism clean and snag-free. It restores a smooth, finished look and helps the door engage correctly. What it does

• Covers the door latch assembly to protect internal components from dust and debris
• Provides a smooth surface to prevent clothing or items from catching on the latch
• Restores the original appearance where the latch cover is cracked, faded, or missing
• Helps maintain proper door engagement by holding the latch area aligned and shielded

• Disconnect power to the appliance before inspecting or replacing any door components
• Access may require removing the door trim or panel; keep track of screws and fasteners
• Replace only with the exact part to ensure proper fit and safe operation

Replacement screw for washer door hinge assembly. Secures the hinge to the cabinet frame. Order if your original screw is stripped, missing, or damaged.

Fix standing water in your washer with this drain pump funnel. Channels water from tub to pump, preventing leaks. Restores proper drainage quickly.

The Screw is an OEM part for GE washing machines. Specifically, an #8-32 thread forming screw is used throughout internal assemblies for tightening and securing components. 

Symptoms of needing replacement screw include:

• Stripped, cross-threaded, or severely worn existing screws
• Screw heads sheared or broken off inside fixtures   
• Loosened panels, covers, or parts from backing-out fasteners

Causes involve fatigue, damage, or rusting of individual screws degrading their clamping abilities over extended use cycles.

This GE OEM replacement screw ensures proper compression and attachment of fixtures. Rely on quality fasteners to preserve structural integrity. Order spares and replace problematic screws today before further issues arise from detached or weakened joints.  

Compatible with some Hotpoint, RCA, and Kenmore models, GE #8-32 screws are essential for thorough washer repairs and maintenance.

Prevents water backflow and siphoning in your laundry center. This inline check valve stops reverse flow to protect drain and water systems. Easy install.

Secures the drain hose connection to prevent leaks during wash cycles. Replace when corroded, broken, or loose to restore proper drainage. Verify fit.

Fix excessive shaking and vibration during spin cycles with this washer rear counterweight. Restores balance to the suspension system for smooth operation.

Replacement screw set for securing the front panel to your dryer or washer chassis. Install when original screws are stripped, missing, or damaged.