Pgcsinfxass Parts

Outer door panel for the lower freezer drawer. Replaces cracked, dented, or discolored panels to restore your refrigerator's appearance.

This replacement machine screw fastens small appliance components and trim, restoring secure fit and preventing rattles or loose panels. Ideal for reattaching brackets, panels, and internal assemblies that use 8-32 fasteners. What it does:

• Secures panels, brackets, and internal components that use an 8-32 thread.
• Stops vibration and rattling caused by missing or loose screws.
• Restores proper alignment for removable trim or access panels.
• Matches the common hex washer-head style for a wide range of appliance mounting points.

• Use the correct 8-32 driver or hex socket to avoid stripping the head.
• Tighten firmly but do not overtighten; overtightening can strip threads or crack plastic.
• Disconnect power and remove any panels as needed before working on electrical components.
• If replacing multiple fasteners, replace all matching screws for even fit and alignment.

This is a standard 8-32 x 1/2 inch hex-head machine screw used to fasten appliance panels, brackets, and components. It replaces missing or damaged mounting screws to restore secure assembly and proper fit. What it does:

• Secures panels, brackets, and internal parts where an 8-32 x 1/2 in. screw is specified
• Stops rattling or loose parts caused by stripped or missing screws
• Restores proper alignment and mounting for components that rely on this fastener
• Works where a standard hex-head 8-32 machine screw is required

• Use the correct 8-32 screw and length to avoid damaging threads or components
• Tighten snugly but avoid over-torquing, which can strip threads or crack plastic
• Disconnect power before servicing
• Replace all like-for-like for even load and fit

This hinge shim restores proper door/lid alignment by spacing the washer hinge where wear or misalignment causes rubbing or improper closing. It's a simple replacement that helps quiet operation and improves fit. What it does:

• Provides precise spacing at the hinge to correct lid/door misalignment
• Reduces rubbing, scraping, and uneven contact during operation
• Helps restore smooth opening and closing of the washer lid/door
• Can prevent premature wear on the hinge and mating surfaces

• Disconnect power to the appliance before beginning any work
• Remove the hinge fasteners to access the worn area and install shim as needed
• Use basic hand tools; keep hardware organized during reassembly

This washer drive coupling connects the motor to the transmission to transfer torque for agitation and spinning. Replacing a worn coupling restores drivetrain engagement so the washer can agitate and spin normally. What it does

• Transfers motor rotation to the transmission and agitator/drum.
• Failsafe shear design helps protect the transmission from overloads when worn or damaged.
• Commonly linked to symptoms like no agitation, no spin, slipping during cycles, or loud grinding/knocking from the drive area.
• Replacing a damaged coupling prevents further wear to motor and transmission components.

• One washer drive coupling

• Disconnect power before starting and drain/remove remaining water from the tub if present.
• Access requires removing the agitator and/or cabinet depending on model; retain fasteners and note orientation.
• Inspect motor and transmission splines for wear; replace damaged mating parts if present.
• Test the washer through a short cycle after installation to ensure proper engagement and quiet operation.

Replacement coupling bucket for your refrigerator's ice maker assembly. Installs in the ice dispensing mechanism. Order a new one if cracked or broken.

This tab washer secures appliance components to a mounting tab, helping keep assemblies stable during operation. It's a small metal washer designed for use where a tab and nut or fastener need a tight, reliable fit. What it does:

• Seats on a mounting tab to spread load and prevent fastener pull-through
• Helps keep panels, brackets or internal components secured during cycles
• Reduces metal-on-metal wear at the tab connection
• Commonly used where a compact washer is needed to lock a tab-mounted fastener

• Disconnect power and water supply before accessing internal components
• Small part — keep track of hardware and work on a clean surface
• Tighten fastener to secure the washer but avoid overtightening to prevent distortion

This is a #8-18 x 5/8 in. truss-head sheet metal screw used to secure appliance panels and internal components. It provides a low-profile, wide-bearing head for stable fastening and reduced pull-through. What it does:

• Fastens trim, access panels, brackets, and small assemblies
• Keeps panels aligned and prevents rattling or vibration noise
• Replaces lost, stripped, or damaged screws that cause loose parts
• Fits common sheet-metal and tapped holes used in appliances

• Use the correct size driver and avoid over-tightening to prevent stripped threads or cracked panels
• Turn power off and unplug the appliance before accessing internal components
• If replacing multiple fasteners, use matching head style and length for consistent fit

This washer hinge secures and guides the lid on top-load washers so the lid opens and closes smoothly and stays aligned. It restores proper lid fit and reduces wobble or misalignment during use. What it does

• Supports the washer lid pivot point for smooth opening and closing
• Keeps the lid aligned to prevent rubbing, binding, or uneven gaps
• Reduces lid movement and noise caused by a worn or damaged hinge
• Helps maintain safety by ensuring the lid closes fully when not in use

• One washer hinge

• Disconnect power before beginning any repair to avoid shock or injury
• Remove the washer lid or access panel per the service instructions to reach the hinge
• Transfer any mounting hardware or hinges in the correct orientation; tighten fasteners securely
• Test lid operation after installation; recheck alignment and fasteners