Pgp986setss Parts

This tube burner supplies and shapes the gas flame for the right-front cooktop burner, restoring proper heating and even flame distribution. It's a direct-replacement cooktop component used on compatible GE gas ranges. What it does:

• Channels gas from the valve to the burner ports to produce the cooking flame
• Restores an even, stable flame when the original tube is cracked, clogged, or damaged
• Can correct weak or irregular flames and ignition failures at the right-front burner
• Works with the burner head/cap and ignition system to ensure consistent ignition

• One right-front tube burner

• Turn off gas supply and disconnect power to the appliance before servicing
• Remove burner cap and head to access the tube; inspect and clean mating surfaces before installing
• Replace only with the correct tube orientation and secure any retaining hardware; test for proper ignition and flame pattern after reassembly

The Burner Cap Assembly is an OEM part for GE gas ranges and cooktops. It sits atop the gas burner to help distribute the flame evenly for better cooking performance. This cap is crucial for achieving precise temperature control and consistent heating, ensuring that food cooks evenly across the cookware.

Symptoms of a bad Burner Cap Assembly include:

• Uneven flame distribution, leading to uneven cooking or heating.
• Difficulty igniting the burner, or the flame going out unexpectedly.
• Visible signs of wear, such as warping, discoloration, or chipping of the burner cap.

Causes of a bad burner cap can include accumulation of food particles or cleaning products that clog the ports, physical damage from impact or dropping, or general deterioration from regular exposure to high temperatures.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Burner Cap Assembly is an OEM part for GE gas ranges and cooktops. It sits atop the burner head and serves to distribute the flame evenly across the surface, enhancing cooking efficiency and consistency.

Symptoms of a faulty burner cap assembly include:

• Uneven flame distribution or a yellow or orange flame.
• Difficulty igniting the burner.
• Excessive soot or unburned gas smell, indicating incomplete combustion.

The common causes of issues with the burner cap assembly include misalignment, food spillage clogging the ports, or wear and tear from regular use. These can affect the flow of gas and air, leading to inefficient combustion and poor cooking performance.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This dual valve is the refrigerator water inlet assembly that controls water flow to the ice maker and dispenser. It restores proper water delivery so the ice maker and dispenser get water when called. What it does:

• Directs water to the ice maker and the dispenser via two solenoid valves
• Commonly replaces a failed valve that causes no water to the ice maker or dispenser
• Can stop intermittent or continuous water flow when a solenoid leaks or sticks
• Helps resolve low or no-water delivery symptoms when filter and supply are OK

• One dual solenoid water inlet valve assembly

• Turn off refrigerator power and shut off the water supply before replacing
• Inspect and replace any damaged inlet tubing or fittings when accessible
• Tighten connections securely but do not overtighten; check for leaks after restoring water

This silicon controlled rectifier (SCR) is an electronic switching component that controls current flow in appliance control circuits, helping regulate power to heaters, motors, or other loads for stable operation. What it does:

• Switches and regulates current in control boards and power circuits
• Can prevent power from reaching a heater, motor, or element when failed
• Helps protect downstream components by controlling surge/current flow

• Disconnect power to the appliance before servicing to avoid shock.
• Handle the SCR carefully to avoid electrostatic discharge (ESD) damage.
• May require board-level replacement or soldering skills.

The Gas cooktop tri-ring surface burner assembly is an OEM part for GE ranges and cooktops. It is comprised of three gas burners designed to provide flexible cooking options by allowing pots or pans to be placed over single or multiple rings.

The gas burner assembly is responsible for heating food safely and efficiently when using gas cooking. Each ring burner produces a defined flame pattern to heat pots or pans evenly.

Causes of a bad gas burner assembly can include cracks, corrosion or damage to burner rings, misalignment of flame ports, or malfunctioning gas valves.

Symptoms of a bad gas burner assembly include:

• Uneven or inconsistent flame patterns
• Inability to light or stay lit
• Yellow or sooty flames
• Gas leaks around burner rings

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This maintop assembly replaces the cooktop surface on compatible ranges, restoring a flat, heat-resistant work area and proper fit for burners and grates. It helps eliminate warped or damaged tops that cause uneven cookware support. What it does:

• Replaces a cracked, dented or severely scratched maintop to restore safe, stable cookware support
• Provides correct mounting surface and alignment for burners, grates and control components
• Prevents heat and spill damage from reaching internal components when the top is intact
• Restores appearance by replacing worn or discolored cooking surface

• Intended for users comfortable with basic appliance disassembly; disconnect power (and gas if applicable) before starting
• Remove burners, grates and control knobs per your model's service instructions to access and fasten the maintop
• Handle carefully to avoid scratching the finished surface; use proper hardware torque and alignment