Pgs688semss Parts

A small metal lock washer that secures fasteners and helps prevent nuts or bolts from loosening under vibration. Fits specific GE appliances where a locking washer is required to keep assemblies tight and stable. What it does:

• Provides a locking grip under a nut or head of a bolt to resist loosening from vibration
• Helps maintain secure connections on panels, brackets, or components
• Can stop intermittent rattling or movement caused by a loose fastener
• Used wherever the original equipment calls for a retaining/lock washer

• One lock washer as shown

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use appropriate tools (needle-nose pliers or small wrench) and replace only in the original orientation
• Do not over-tighten fasteners — tighten just enough to compress the washer and engage locking feature
• Keep small parts away from children and pets

This high-voltage electrodes and harness assembly replaces the ignition electrode wiring used to deliver spark to burners. It restores reliable spark delivery so the cooktop or range can light safely and consistently. What it does:

• Carries high-voltage ignition from the module to the burner electrodes to create the spark
• Replaces cracked, corroded, or damaged electrode wires that cause weak or no spark
• Stops continuous clicking or intermittent ignition when worn or shorted
• Helps ensure proper spark routing and spacing for consistent ignition

• Disconnect electrical power and, if applicable, gas supply before servicing
• Handle electrodes and porcelain insulators carefully to avoid damage
• Route harness and seat connectors per OEM routing; ensure secure, snug electrical connections
• Test ignition operation after installation and restore power/gas only when safe

This valve lockout mounting clip secures the appliance's gas valve actuator to help prevent unintended valve movement and ensure consistent operation. It replaces a worn or broken lockout clip to restore reliable valve positioning. What it does:

• Secures the gas valve actuator or linkage to keep the valve in its intended position
• Helps stop intermittent or loose valve movement that can cause inconsistent ignition or burner operation
• Restores proper mechanical alignment after the original clip has cracked, bent, or broken
• Small replacement part used where a damaged lockout clip prevents stable valve function

• One valve lockout mounting clip

• Disconnect power and shut off gas supply before servicing; follow all safety precautions
• Inspect adjacent fasteners and actuator for damage; replace any additional damaged parts as needed
• Basic hand tools typically required; handle small plastic clips carefully to avoid breakage

This tangential blower circulates air across oven/microwave components to help cool electronics and maintain proper airflow. Replaces a worn or failed blower to restore cooling and reduce overheating risks. What it does:

• Moves air along the appliance's internal components to help dissipate heat
• Helps prevent overheating of control electronics and nearby parts
• Can stop whining or rattling noises when a worn fan is replaced

• One tangential blower assembly

• Disconnect power to the appliance before starting any repair
• Follow the appliance manufacturer's service instructions and wiring diagrams
• Handle with care around sharp sheet metal and fragile components

This glass and touch board assembly replaces the front control glass and capacitive touch interface to restore a stove/oven's control panel appearance and responsive touch control. Ideal for cracked glass, unresponsive touch keys, or cosmetic damage. What it does:

• Provides the glass surface and integrated touch sensors for the cooktop/oven control panel.
• Restores touch-key input so oven functions and settings can be selected from the front panel.
• Replaces cracked, scratched, or delaminated glass that affects appearance or use.
• Interfaces with the oven's main control electronics through the original connector.

• One glass and touch board assembly.

• Disconnect power (unplug or switch off breaker) before servicing to avoid shock or damage.
• Handle glass carefully to avoid cuts; use padded surfaces and proper tools when removing mounting screws.
• Remove or label electrical connectors and mounting hardware during disassembly to ensure correct reassembly.

This bake element heats the oven cavity so food cooks evenly on bake settings. It replaces a failed or damaged element to restore proper baking performance and clear heating issues. What it does:

• Heats the bottom of the oven for bake cycles
• Replaces elements that are broken, visibly burnt, or not producing heat
• Helps resolve uneven cooking, no-heat on bake, or error codes related to open elements
• Works with matched oven control settings to maintain set temperatures

• One bake/heating element

• Disconnect power to the appliance before starting any repair
• Handle the element carefully to avoid bending or damaging terminals
• Verify electrical connections are tight and secure; replace mounting screws if worn

This replacement pan-head screw is used in refrigerators to fasten panels, brackets, and covers so they stay tight and properly aligned. Replace a missing or damaged screw to restore a solid, rattle-free fit.

• Secures interior/exterior panels, brackets, trim, and covers
• Replaces missing, stripped, or corroded hardware
• Helps maintain proper alignment of attached components

• Disconnect power before servicing; shut off water if working near water lines
• Match location to the original fastener and start threads by hand to avoid cross-threading
• Do not overtighten, especially into plastic or thin sheet metal

• Thread size: #8-18 (type AB)
• Length: 1/2 inch
• Head style: Pan head, Phillips drive

This 10-32 x 1/2 machine screw secures appliance components where a standard 10-32 fastener is required. It restores proper mounting and reduces vibration or loose panels for reliable, quiet operation. What it does:

• Secures panels, brackets, or components that use a 10-32 threaded hole
• Prevents rattling, misalignment, and intermittent contact caused by loose fasteners
• Maintains electrical or mechanical connections when used as the OEM-specified screw
• Helps restore fit and finish after repair or disassembly

• Use the correct 10-32 driver (Phillips or slotted depending on head) and hand-start the screw to avoid cross-threading
• Tighten until snug; avoid over-tightening to prevent stripping threads or cracking plastic parts
• Replace only with the same size and thread spec to ensure proper fit
• Disconnect power if working near energized components or wiring

This is a 1/4-20 UNC machine screw used to fasten appliance components securely. It restores proper fit and stability where threaded fasteners are required, preventing loose panels or shifting parts. What it does:

• Secures panels, brackets, or assemblies that use a 1/4-20 UNC threaded hole
• Stops rattling or movement caused by a missing or damaged screw
• Restores correct mechanical connection for safe operation
• Useful when replacing stripped, corroded, or lost fasteners

• Disconnect power to the appliance before servicing.
• Start threads by hand to avoid cross-threading; tighten until snug.
• Do not overtighten — use appropriate torque for the material to avoid stripping threads or damaging parts.
• Ensure proper contact and secure fastening.

A flat head sheet metal screw used to fasten appliance panels and components where a flush finish is needed. Zinc plating helps resist corrosion and provides long-lasting secure attachment. What it does:

• Secures trim, panels, brackets or small components to sheet metal surfaces
• Flush countersunk head sits level with the surface for a clean fit
• Zinc finish resists rust in typical household environments
• Replaces stripped, missing or loose fasteners that cause rattling or misalignment

• Unplug or disconnect power to the appliance before servicing
• Use the correct sized Phillips driver or bit to avoid cam-out and head damage
• Do not overtighten; stop when the head is flush to prevent stripping or deforming the panel

This slide control is the user-operated slider that adjusts a front-panel setting, restoring smooth, reliable position selection and tactile feedback. It replaces worn or damaged sliders so controls respond predictably. What it does:

• Moves along a track to change a user control setting (e.g., temperature, speed or level) and provides a detented position feel
• Restores mechanical connection between the user knob/slider and the internal control mechanism
• Commonly replaces units that are stuck, loose, broken, or provide intermittent contact
• Helps eliminate slipping or poor tactile feedback when selecting settings

• One slide control assembly as shown

• Disconnect power to the appliance before starting any repair
• Most installs require removing the console or control panel; keep screws and small parts organized
• Handle plastic tabs and mounting features gently to avoid breakage
• Ensure secure mating and correct orientation before reassembly

This glass mounting bracket secures the oven door glass to the door frame, restoring a stable, properly aligned door and helping prevent rattling or loose glass. Designed to replace a worn, broken, or missing bracket. What it does:

• Holds the oven door glass in place so the door closes and seals correctly
• Prevents glass from shifting, rattling, or coming loose during use
• Restores proper alignment after a cracked, bent, or missing bracket
• Works with the door assembly to maintain safe, reliable operation

• Disconnect power to the appliance before beginning any repair; allow surfaces to cool.
• Handle glass carefully and wear cut-resistant gloves and eye protection.
• Replacement typically requires partial door disassembly; keep fasteners organized for reassembly.
• Tighten fasteners securely but avoid over-torquing; inspect surrounding clips and gaskets while installing.