Pgs688semss Parts

LED light board assembly that provides interior illumination for compatible refrigerators. Replaces a failed or dim LED module to restore even lighting so you can see contents clearly and access food safely. What it does:

• Replaces the refrigerator's interior LED light board to restore proper illumination.
• Fixes common lighting symptoms such as no light, dim lights, flickering, or partial outages.
• Provides a direct replacement that mounts in the existing light housing and connects to the factory wiring harness.

• Disconnect power (unplug or shut off breaker) before starting work to avoid electric shock.
• Remove interior shelves or light cover as needed; handle the board by its edges and avoid touching LED surfaces.
• Verify connector orientation and seat wiring harness fully; secure board to the housing with original fasteners.

Size: 8abx3/8 - blk)

This vent trim is the exterior trim piece that finishes and protects the appliance vent opening, restoring a clean appearance and helping direct airflow. It replaces a cracked, dented or missing vent surround. What it does:

• Covers the vent opening and hides raw edges for a finished look
• Helps channel exhaust airflow and stabilize the vent opening
• Prevents debris and large particles from entering the vent gap
• Stops rattling or movement caused by a loose or damaged trim
• Restores proper fit and alignment of the vent surround

• One vent trim piece

• Disconnect power to the appliance before starting any work
• Remove the old trim by loosening retaining screws or clips, then position the new trim and secure with the original fasteners
• Use basic hand tools; avoid overtightening screws to prevent cracking
• If metal edges are sharp, wear gloves and work carefully

The glass and touch board assembly is an OEM part for GE ranges. It is responsible for providing a user-friendly interface for controlling and adjusting various functions of your range.

A bad glass and touch board assembly can lead to issues such as unresponsive or malfunctioning touch controls, a non-functioning display, or error messages. Causes of a bad assembly can include wear and tear over time, electrical malfunctions, or damage to the touch board components.

Symptoms of a bad glass and touch board assembly include:

• Unresponsive or erratic touch controls
• A blank or flickering display
• Error messages or incorrect readings on the display
• Inability to adjust or change settings

Replace your worn-out or damaged glass and touch board assemblywith this genuine OEM GE part to restore your range. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This inject burner assembly replaces a damaged or worn hob injector to restore proper gas flow to a cooktop burner. It provides the correct metered fuel delivery for consistent ignition and stable flame control. What it does:

• Directs and meters gas from the manifold into the burner for predictable burning
• Helps burners light promptly and maintain an even flame
• Can resolve weak flames, uneven heating, or failure to light when caused by the injector
• Works with the burner head and cap to form the complete burner flame assembly

• Turn off the gas supply and unplug the appliance before starting any work
• Inspect gaskets and fittings for leaks; replace or tighten per manufacturer guidance
• Use proper tools and follow OEM diagram orientation for correct installation

This 1/4-20 screw secures panels, brackets, and other assemblies in your appliance. It restores a tight, reliable hold when an original fastener is missing, stripped, or corroded.

• Fastens components that require a 1/4-20 threaded screw
• Helps keep panels and assemblies aligned and rattle-free
• Direct replacement for worn, rusted, or lost hardware
• Common symptoms: loose or vibrating parts, misaligned brackets, missing fastener

• Disconnect power; turn off gas supply before servicing
• Allow the appliance to cool; wear gloves and eye protection
• Start threads by hand to avoid cross-threading; use the correct driver/tool
• Tighten snugly—do not overtighten to prevent stripping or damage

This stainless steel oven door handle gives your range a finished look and a safe, sturdy grip for opening and closing the oven. It replaces a damaged, loose, or missing handle to restore normal operation and appearance. What it does

• Provides a secure handhold for opening and closing the oven door.
• Replaces handles that are bent, dented, cracked, or have stripped mounting holes.
• Stops wobble or play from loose or damaged handles when tightened or replaced.
• Restores the appliance's appearance with a stainless steel finish.

• One stainless steel oven door handle

• Disconnect power to the appliance before beginning work; allow the oven to cool completely.
• Support the oven door when removing or installing the handle to prevent dropping or pinching.
• Use the correct fasteners and hand tools; tighten mounting screws securely but avoid over-torquing.

The Burner Valve Assembly 270 is an OEM part for GE gas ranges. It controls gas flow to individual burners to deliver precise heating levels.  

Causes of a bad burner valve assembly include worn rubber diaphragms, debris inside valve channels, or damage from repeated heating cycles.

Symptoms are:

• Uneven cooking temperatures across burners
• Inability to ignite or adjust certain burners  
• Fluctuations in flame height/cooking output

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas range models.

This self-adhesive foam strip provides a flexible seal and buffer for appliance gaps, helping reduce drafts, rattling, and moisture intrusion. Designed for easy stick-on replacement where foam padding or sealing is needed. What it does

• Seals small gaps between components to help reduce air leaks and temperature loss
• Cushions panels and doors to minimize noise and vibration
• Helps block moisture and dust from entering sensitive areas
• Self-adhesive backing allows for quick placement without extra glue

• One self-adhesive foam strip

• Surface must be clean and dry; wipe with isopropyl alcohol for best adhesion
• Measure and trim the foam strip to fit—use scissors or a utility knife
• Press firmly along the length to ensure full contact; allow adhesive to set before closing doors or panels
• For safety, disconnect power to the appliance before working in internal areas

This oven door gasket assembly seals the oven door to help keep heat, smoke and odors inside the oven cavity for more even cooking and improved efficiency. It replaces a worn or damaged door seal quickly and easily. What it does:

• Forms a heat-tight seal around the oven door to reduce heat loss and improve temperature stability
• Helps prevent smoke and odors from escaping into the kitchen
• Reduces energy waste from a failing or brittle seal
• Common symptom fix: visible gaps, charred or compressed gasket, heat felt at the door edge, longer cook times or uneven baking

• One oven door gasket assembly

• Disconnect power (and gas if applicable) and allow the oven to cool completely before beginning
• Inspect the door and retainer for damage; remove old gasket per OEM instructions and fit new gasket evenly into the retainer channel
• Avoid over-stretching the gasket; ensure a continuous seal around the full perimeter

This right-hand cam closure is a direct-fit replacement that helps the refrigerator door close and stay aligned for a proper seal. It restores smooth hinge movement and reliable door latching to reduce gaps and cold loss. What it does:

• Guides and secures the door as the hinge rotates to help the door latch fully
• Maintains door alignment to support an even seal and consistent cooling
• Reduces hinge noise and sticking when worn or damaged
• Common symptom: door won't stay closed, rubs, or leaves an uneven gap

• Disconnect power to the appliance before starting any repair
• Support or remove the door per the manufacturer's service instructions to access the hinge/cam
• Replace the cam and reassemble hardware; verify door alignment and operation after installation

This small replacement bumper cushions and protects the appliance frame/trim where panels meet, helping reduce vibration, chipping and rattles for a cleaner, quieter fit. Ideal when the original bumper is worn, cracked or missing. What it does:

• Cushions contact between the frame/trim and adjacent panels to reduce noise and prevent damage
• Helps maintain proper panel alignment and sealing where the trim meets the cabinet
• Reduces rattling or vibration caused by loose or degraded trim pads
• Restores protective spacing that prevents chips or scratches to finished surfaces

• One frame front bumper

• Disconnect power to the appliance before starting work and follow all safety precautions
• Usually installs by pressing into a slot or onto a mounting surface after removing the trim piece; some trim removal may be required
• Inspect mating surfaces for damage or debris and clean before installing the new bumper
• Replace with the exact part number only; do not force or modify the bumper to fit

This replacement door hinge restores proper door alignment and smooth opening on compatible GE refrigerators. It provides the durable pivot point needed to keep the door seating correctly and reduce sag or binding. What it does:

• Replaces a worn or bent hinge to correct door sag and uneven gaps
• Restores smooth pivoting for easier opening and closing
• Helps ensure a proper door seal to maintain cooling performance
• Addresses symptoms like door dragging, misalignment, or rubbing

• One replacement door hinge

• Verify hinge orientation and mounting location before installation
• Support the door while removing/installing hinge hardware to prevent damage or injury
• Use appropriate tools and follow manufacturer torque recommendations if available
• Disconnect power and remove stored items from the door if work affects electrical components

The Spark Ignition Switch and Harness is an OEM part for GE ovens and ranges. This switch and harness work together to safely ignite the gas burners by providing power from the control unit to the burners.

Causes of a bad switch or harness include wear and tear over time from repeated use or aging components. It could also be damaged from liquid spills or cleaning chemicals getting inside the unit.

Symptoms of a bad switch or harness include:

• Gas burners not lighting properly or at all
• Irregular or no ignition of the burners
• Safety issues with gas leaks if the switch fails to ground properly

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Line Cord is an OEM part for GE gas ranges. It safely delivers gas and electrical supply between the range and household connections.

Causes of failure can be insulation cracks from repetitive plug insertion/removal, bent pins compromising contacts, or wire fatigue over prolonged usage.

Symptoms of a faulty line cord include:

• Gas valves failing to activate or ignite burners 
• Lights/igniters not illuminating due to interrupted power
• Potential shock or fire hazard from exposed wire ends

This OEM part is also compatible with Hotpoint and RCA gas range models.