Pgs688semss Parts

This damper assembly controls airflow between refrigerator compartments to help maintain even temperatures. It replaces a worn or stuck damper to restore proper cold-air balance and improve cooling performance. What it does:

• Opens and closes to regulate cold-air flow from the freezer to the fresh-food section
• Can restore airflow when the refrigerator is warmer than the freezer or compartments are unevenly cooled
• Helps correct symptoms such as poor cooling, fluctuating temperatures, or a freezer that's much colder than the fridge
• Works with the refrigerator's temperature controls to maintain set temperatures

• One damper assembly

• Disconnect power to the appliance before starting any repair
• Locate the damper in the fresh-food section near the top or the freezer-to-fridge air duct; remove shelves or covers as needed for access
• Handle the actuator and linkage gently; ensure correct orientation and secure mounting when installing
• After installation, reconnect power and allow the refrigerator several hours to stabilize; verify airflow and temperature operation

This dispenser interface is the user-facing control board that lets the dispenser send commands to the ice/water system, restoring responsive button operation and dispenser controls. It's the board behind the dispenser touchpad and LED indicators. What it does:

• Accepts button or pad inputs and sends signals to the dispenser and ice/water actuator
• Helps restore unresponsive dispenser buttons, lights, or selector functions
• Works with the dispenser housing and wiring harness to control dispense actions
• Affects dispenser lock, water dispense, and ice selection when faulty

• One dispenser interface control board

• Disconnect power to the appliance before starting any work
• Remove dispenser trim or housing panels to access the interface; avoid sharp edges
• Handle the board by the edges and avoid contact with circuitry or connectors
• Reconnect all wiring harnesses securely; no programming required in most models

This small rubber grommet cushions and secures a range or oven door handle, helping keep the handle stable and reducing wear where the handle meets the door. It restores a snug fit and quiet operation. What it does:

• Acts as a protective bushing between the handle and door to prevent metal-on-metal contact
• Helps stop a loose, wobbly, or rattling handle
• Reduces wear on mounting holes and finish around the handle
• Provides a tight, vibration-dampening fit for the handle assembly

• Disconnect power to the appliance before starting any work
• Typically a simple press-fit replacement; handle removal may be required for access
• Inspect surrounding fasteners and mounting surfaces; replace damaged parts as needed

Nickel

This glass and touch board assembly replaces the front control glass and capacitive touch interface to restore a stove/oven's control panel appearance and responsive touch control. Ideal for cracked glass, unresponsive touch keys, or cosmetic damage. What it does:

• Provides the glass surface and integrated touch sensors for the cooktop/oven control panel.
• Restores touch-key input so oven functions and settings can be selected from the front panel.
• Replaces cracked, scratched, or delaminated glass that affects appearance or use.
• Interfaces with the oven's main control electronics through the original connector.

• One glass and touch board assembly.

• Disconnect power (unplug or switch off breaker) before servicing to avoid shock or damage.
• Handle glass carefully to avoid cuts; use padded surfaces and proper tools when removing mounting screws.
• Remove or label electrical connectors and mounting hardware during disassembly to ensure correct reassembly.

A heavy-duty cast grate assembly that restores a stable cooking surface on gas cooktops. Replaces a cracked, warped or missing grate so pots and pans sit level and heat evenly for safer cooking. What it does:

• Supports cookware over the burner for stable, even heating
• Replaces broken, cracked, warped or sagging grates that cause wobbling
• Helps prevent direct contact between cookware and burner heads
• Restores correct clearance for reliable ignition and flame performance

• Allow cooktop to cool completely before removal or installation
• Replace by lifting out the old grate and setting the new grate into place—no special tools usually required
• Inspect surrounding cooktop surfaces and burner caps for proper fit after installation

A 10-24 lock nut used to secure threaded fasteners and prevent loosening from vibration. Simple, durable replacement that restores proper fastening where the original nut has worn or failed. What it does:

• Secures shafts, studs, or bolts with 10-24 threads and resists loosening under normal appliance vibration.
• Restores proper tension where a stripped or loose nut causes rattling or parts shifting.
• Helps maintain alignment of panels, brackets, or components that rely on a locked fastener.
• Small hardware solution for common fastening failures—no special part modifications required.

• Disconnect appliance power and water before beginning repairs.
• Use the correct 10-24 threaded fastener and a properly sized wrench or socket to avoid rounding the nut.
• Tighten to a snug fit—do not overtighten or force onto damaged threads.
• Inspect mating threads and replace the bolt/stud if threads are stripped or damaged.

This wire beverage rack provides a secure place on the refrigerator door to store cans and bottles, keeping drinks organized and easy to reach. It restores proper door storage and prevents items from falling or shifting. What it does:

• Replaces a broken, bent, or missing beverage rack to restore door storage
• Holds cans, bottles and other small drink containers securely on the door
• Stops rattling, sliding, or items falling when the door is opened or closed
• Keeps bottles and cans organized for easier access

• One wire beverage rack

• Designed to attach to the refrigerator door; orientation and clip locations may vary by model
• Remove any damaged rack or clips before installing the replacement
• Install by snapping into the door shelf clips or securing with the existing fasteners; do not force parts into place
• Unplug the appliance or disconnect power before working inside the refrigerator for safety

This meat pan frame is the replacement support that holds the deli/meat pan securely in the refrigerator crisper area, restoring proper fit and preventing the pan from sagging or shifting. What it does:

• Supports and stabilizes the deli/meat pan so it stays level and slides correctly
• Helps maintain proper airflow and organization in the crisper/deli section
• Replaces a cracked, bent, or missing frame that lets the pan shift or fall
• Reduces risk of spills and food contact with damaged cabinet edges

• Unplug the appliance or disconnect power before servicing
• Remove food and the deli/meat pan before installing the frame
• Typically installs with simple clips or screws; hand tools may be required
• Inspect adjacent trim and fasteners and replace any damaged pieces for a secure fit

This mounting bracket secures internal appliance components to the cabinet or frame, restoring stable support and proper alignment for the attached assembly. It's a direct-fit replacement when the original bracket is bent, broken, or missing. What it does:

• Provides a solid attachment point to keep components aligned and secure
• Prevents vibration, rattling, or movement caused by a damaged or missing bracket
• Restores correct positioning for connected parts so they operate reliably
• Helps maintain sealing and clearance by holding panels or assemblies in place

• One mounting bracket as pictured

• Inspect surrounding fasteners and mounting points; replace any stripped screws or clips
• Use the same screw locations and hardware type as the original for proper fit
• Disconnect power and remove any nearby panels before accessing the bracket to avoid injury

This silicon controlled rectifier (SCR) is an electronic switching component used on appliance control boards to regulate power to heating elements or motors, restoring proper control and operation when the SCR fails. What it does:

• Acts as a power-control switch on control boards to deliver variable current to heaters or motors
• Helps regulate on/off cycles and output under control-board commands
• Failure may cause no heat, intermittent heating, or components not running as expected
• Replacing a faulty SCR can restore consistent power control and appliance function

• Disconnect all power before servicing; risk of electric shock or damage
• Static-sensitive component—use proper ESD precautions when handling
• Replacement typically requires desoldering/soldering on the control board or replacement of the control module

This silicon controlled rectifier (SCR) is an electronic switching component that controls current flow in appliance control circuits, helping regulate power to heaters, motors, or other loads for stable operation. What it does:

• Switches and regulates current in control boards and power circuits
• Can prevent power from reaching a heater, motor, or element when failed
• Helps protect downstream components by controlling surge/current flow

• Disconnect power to the appliance before servicing to avoid shock.
• Handle the SCR carefully to avoid electrostatic discharge (ESD) damage.
• May require board-level replacement or soldering skills.