Pgs930py6fs Parts

The Machine Board with Frame is an OEM component specifically designed for GE gas ranges. This board oversees critical cooking functions including ignition, temperature control of the burners and oven operations. 

Symptoms of a bad machine board include:

• Burners not lighting properly or staying lit
• Oven not reaching or maintaining set temperatures 
• Improper burner or oven shut-off
• Control buttons and display malfunctions

Causes of a bad machine board can be failures over time due to heat stresses, appliance age, electrical surges, or physical impacts.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This Wi-Fi module kit replaces the appliance's wireless communications board to restore smart connectivity and app features. Use it when your appliance can't join your home network or when remote functions stop responding. What it does

• Provides the wireless interface so the appliance can connect to a home Wi-Fi network and communicate with the manufacturer app or cloud services
• Restores remote monitoring and control features that rely on a network connection
• Addresses symptoms such as inability to connect to Wi-Fi, lost smart features, or communication-related error messages
• Works with the appliance's control system to enable firmware updates and remote diagnostics when supported

• One Wi-Fi module kit

• Disconnect power to the appliance before beginning any work to avoid shock or injury
• Follow the OEM service instructions for removal and installation; proper seating and connector alignment are required
• After installation, reconnect to your home network and complete any app/registration steps per the manufacturer's setup guide

This glass touch board assembly replaces the control panel glass and integrated touch sensor board to restore responsive controls and a clean front appearance on compatible ranges and cooktops. It provides a ready-to-install replacement for a damaged or unresponsive control surface. What it does

• Replaces the front glass and touch-sensor circuit used to select functions and set temperatures.
• Restores touch responsiveness when buttons or the control surface fail to register input.
• Replaces cracked, scratched, or cosmetically damaged control glass for improved appearance.
• Helps address intermittent or non-working control inputs caused by a faulty touch board.

• One glass touch board assembly (glass panel with attached touch/control board), quantity: 1

• High-level: Remove power to the appliance before starting; this part installs behind the control bezel and may require removing the backguard or control housing.
• Handle the glass carefully to avoid breakage and wear appropriate hand protection.
• If connectors or screws are tight, do not force; verify alignment before fastening to avoid damage.

This stainless steel panel manifold replaces the damaged or worn front manifold panel on compatible refrigerators, restoring a clean, finished look and proper dispenser/trim fit. Durable metal construction resists everyday wear. What it does:

• Replaces the refrigerator's front manifold panel to restore proper alignment and trim around dispenser or control openings.
• Provides a corrosion-resistant stainless finish to maintain appearance and surface durability.
• Helps stop cosmetic issues like dents, scratches, or loose trim that affect the dispenser area.
• Works with the existing mounting points and trim to retain factory fit and function.

• One stainless steel panel manifold.

• Intended for qualified DIYers; verify model compatibility before ordering.
• Power off and unplug the appliance and turn off water supply before beginning work.
• Handle panel edges carefully to avoid cuts; use proper fasteners and follow OEM fastening sequence.
• Reuse or replace any associated gaskets, clips, or trim pieces only if explicitly listed in model instructions.

The Stainless Steel Handle is an OEM replacement part for GE electric range models. It provides a sturdy grip for opening and closing the oven door.

Causes of failure include loosened mounting screws from repetitive use, bent or damaged profile from impact, and corrosion affecting appearance.  

Symptoms of a faulty handle include:

• Difficulty smoothly opening and closing the oven door 
• Risk of pinched fingers if handle wobbles during operation
• Degraded aesthetic and value of the appliance over time

This OEM stainless handle also fits select Hotpoint and RCA electric ranges.

This tube burner supply is the replacement gas tube that delivers fuel from the range/oven valve to the burner, restoring proper gas flow for reliable ignition and consistent flame performance. What it does:

• Directs gas from the appliance valve to the burner for normal operation
• Replaces cracked, corroded, or clogged burner tubing that can cause fuel flow disruption
• Helps correct symptoms such as burners that won't light, weak or uneven flames, or intermittent ignition
• Restores a sealed path for gas to reduce leakage risk when installed and tightened correctly

• Turn off gas supply and electrical power to the appliance before beginning work
• Verify proper fit and orientation to the valve and burner; use the OEM clamp/hardware if provided
• After installation, check all connections for leaks (soap-and-water test) and restore power per the appliance manual

This replacement screw secures appliance components and helps keep panels, brackets, and controls firmly attached for reliable operation. It's a simple, direct fix when a mounting screw is missing, loose, or stripped. What it does:

• Fastens panels, trim, brackets or electrical components to reduce movement and rattling.
• Restores proper alignment of parts that shift when a screw is missing or worn.
• Helps maintain electrical and mechanical connections by keeping components seated.
• Common symptom: loose or vibrating panels, trim gaps, or visibly missing hardware.

• Disconnect power to the appliance before accessing internal components.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Thread gently and avoid overtightening to prevent stripping the mating threads or cracking surrounding parts.
• Keep any removed hardware organized to ensure placement of all required fasteners during reassembly.

This lower heat shield is a stamped metal shield that protects the oven's lower cabinet area and surrounding components from excessive heat. It helps maintain safe operation and reduces heat transfer to nearby parts. What it does:

• Shields the oven's lower cavity and insulation from direct heat
• Prevents heat-related damage to the range cabinet and nearby components
• Can reduce hotspots that cause smoking or burning odors
• Restores proper airflow and clearance under the oven when damaged or missing

• One lower heat shield

• Disconnect power (and gas, if applicable) before servicing the appliance
• Remove oven drawer and access panels to reach and replace the shield
• Use gloves to protect hands from sharp metal edges during installation
• Tighten fasteners securely but do not overtighten—replace any damaged mounting hardware

This small V2 inlet jet directs water flow to the dispenser/ice-making area so the appliance fills and forms properly. It restores correct water routing for consistent filling and helps reduce weak or misshapen ice or slow dispensing. What it does:

• Channels water to the ice maker/dispenser so the correct amount reaches the fill area.
• Helps ensure uniform ice formation and consistent dispenser flow.
• Can resolve symptoms like weak/slow dispensing, underfilled ice trays, or uneven ice cubes.
• Works as the small replacement nozzle where the original inlet jet is worn or blocked.

• One small V2 inlet jet

• Disconnect power and shut off the water supply before beginning work.
• Access may require removing inner panels or the ice maker/dispenser housing; follow your model's service instructions.
• Inspect the seat and surrounding fittings for debris or damage before installing; replace other damaged components as needed.

The Badge Assembly is an OEM part for GE ranges. It includes the magnetic decorative badge affixed to the front of the range. This badge displays important information such as the brand name, model number, and technical specifications.

Causes of a bad badge assembly can include damage from impacts or abrasions over time, adhesive failure from repeated heat exposure, or normal wear from routine cleaning. On a range, the badge must withstand higher cooking temperatures.

Symptoms of a bad badge assembly include:

• Faded or illegible print on the badge face
• Cracks or breaks in the plastic material
• The badge lifting or peeling away from the surface
• Missing or loose attachment clips/fasteners

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This orifice spud meters gas to a burner, controlling flow for a correct, stable flame. Replace a clogged or damaged spud to restore reliable ignition and proper flame characteristics.

• Threads into the orifice holder to regulate gas flow to the burner head
• Helps maintain proper flame height and shape during cooking
• A clogged or damaged spud can cause weak/uneven flames, yellow tipping, or delayed ignition
• Replacing the spud can improve lighting and flame consistency

• Disconnect power and shut off gas; allow the appliance to cool completely
• Remove grates, caps, and burner heads (as applicable) to access the orifice
• Support the orifice holder while loosening/tightening the spud to avoid twisting the gas tube
• After reassembly, restore gas and check for leaks with an approved leak-detection solution; verify proper burner operation

The GE Range Support Base is an OEM replacement part for GE wall ovens and ranges. It provides critical support and stability for the appliance, ensuring safe and reliable operation. 

Causes of a bad support base could include cracks or breaks in the material over time due to repeated stresses and strains from the heavy appliance above it. The base may also become damaged or unstable if the unit is moved incorrectly and suffers impact.

Symptoms of a failing support base include:

• The oven or range rocking or becoming unlevel during use  
• Noisy or squeaking sounds coming from the base
• Visible cracks or weaknesses in the material
• The appliance seeming loose or unstable on the countertop or floor

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

Package of 12

This high-voltage electrodes and harness assembly replaces the ignition electrode wiring used to deliver spark to burners. It restores reliable spark delivery so the cooktop or range can light safely and consistently. What it does:

• Carries high-voltage ignition from the module to the burner electrodes to create the spark
• Replaces cracked, corroded, or damaged electrode wires that cause weak or no spark
• Stops continuous clicking or intermittent ignition when worn or shorted
• Helps ensure proper spark routing and spacing for consistent ignition

• Disconnect electrical power and, if applicable, gas supply before servicing
• Handle electrodes and porcelain insulators carefully to avoid damage
• Route harness and seat connectors per OEM routing; ensure secure, snug electrical connections
• Test ignition operation after installation and restore power/gas only when safe

This rotary switch is the user-control selector that lets you choose settings on your appliance and restores responsive, consistent control when the original switch is worn or malfunctioning. It provides a direct replacement that matches OEM fit and function. What it does:

• Selects the appliance control position (temperature/speed/setting) as you turn the knob
• Restores reliable electrical contact when the original switch has intermittent operation or unresponsive detents
• Stops erratic or non-functioning controls caused by worn contacts or broken selector mechanism
• Re-establishes safe, repeatable control positions for normal appliance operation

• One rotary switch

• Disconnect power to the appliance before starting any repair
• Access may require removing the control panel or console; handle panel clips and trim carefully
• Take care with terminals and wiring; note original connections or photograph before disconnecting