Pgs930py6fs Parts

The Base Burner is an OEM part for GE gas range and cooktops. It securely holds the burner assembly in place on the cooktop. 

Symptoms of a faulty base burner include:  

• Loose or wobbly burners that could tip or shift during cooking
• Difficulty cleaning accumulated debris from recessed areas  
• Potential gas or electric exposed connection hazards

Causes involve worn or cracked mounting brackets after years of use, missing or stripped retention screws, and impact damage to supports.

This OEM part is compatible with Hotpoint and RCA electric range brands as well.

The Range NG High Altitude Kit is an OEM part for GE gas ranges. This high-altitude conversion kit allows the range to operate properly at elevations above 2000 feet.

Causes related to needing this kit are using the range at a high elevation without proper adjustment for decreased air pressure and oxygen levels.

Symptoms of needing this high-altitude kit include:

• Unstable or inconsistent flame during operation
• Excessive cooking times
• Incomplete combustion of gas resulting in carbon monoxide issues

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This LP high-altitude conversion kit adapts select gas cooking appliances for liquid propane use at elevation. It properly meters gas flow so burners light easily and produce clean, stable flames in thin-air conditions.

• Configures the appliance for LP operation in high-altitude installations
• Calibrates fuel delivery to maintain proper flame size and combustion
• Helps address yellow/sooty flames, flame lift, or hard-to-control simmer after conversion
• Promotes reliable ignition and even heat across burners

• Conversion affects gas type and pressure; must be performed per the manufacturer's instructions and local codes
• Shut off gas and power before service; work in a well-ventilated area away from open flames or sparks
• After conversion, leak-test all connections and adjust air shutters per model guidance if applicable
• Intended for LP high-altitude applications only; use the model-specific kit specified by the manufacturer

This small rubber grommet cushions and secures a range or oven door handle, helping keep the handle stable and reducing wear where the handle meets the door. It restores a snug fit and quiet operation. What it does:

• Acts as a protective bushing between the handle and door to prevent metal-on-metal contact
• Helps stop a loose, wobbly, or rattling handle
• Reduces wear on mounting holes and finish around the handle
• Provides a tight, vibration-dampening fit for the handle assembly

• Disconnect power to the appliance before starting any work
• Typically a simple press-fit replacement; handle removal may be required for access
• Inspect surrounding fasteners and mounting surfaces; replace damaged parts as needed

This skirt is the lower front trim panel that covers and protects the base of your range or oven for a finished look. It restores proper coverage and helps keep debris from collecting under the appliance. What it does:

• Covers the toe/vent area at the base of the range or oven for a clean appearance
• Protects internal components from dust, grime, and small debris
• Helps retain proper airflow path around the appliance base
• Replaces bent, cracked, or missing lower trim that can detract from appearance

• Disconnect power to the appliance before beginning repairs
• Remove the oven/range lower access panel or drawer to access mounting screws or clips
• Support the front while loosening fasteners; skirt may be held by screws and/or retention clips
• Handle edges carefully to avoid cuts and recheck fit and fasteners before restoring power

The Handle and End Cap Assembly is an OEM part for GE gas range models. It provides a grip for opening and positioning the oven door.

Symptoms of a faulty assembly include:  

• Loosened mounting of the handle introducing inaccuracies 
• End caps cracking or warping from prolonged heat exposures
• Degraded aesthetic appeal detracting from the cooking space

Failures stem from normal wear on mounting screws from frequent use, impact damages compromising structural support, and heat exposures deteriorating plastic end caps over time.

This OEM part is compatible with select Hotpoint and RCA gas range models as well.

This range top is the main cooktop surface that provides a flat, finished work area for burners and controls, restoring the look and function of the stove's cooking area. Fits as the direct replacement cooktop surface used on compatible GE ranges. What it does

• Replaces a damaged, dented, or chipped cooktop surface to restore a safe, even cooking area.
• Supports burners and grates while helping contain spills and drips for easier cleanup.
• Helps maintain proper alignment of burner openings and control interfaces.
• Can reduce heat loss and hotspot issues caused by warped or damaged surfaces.

• One range top (single cooktop surface) as shown.

• Turn power and gas supply off before starting work; follow all safety procedures for your appliance.
• Removal typically requires lifting off grates and burners, then unfastening retaining screws—keep track of all hardware.
• Handle carefully to avoid scratching the finished surface; use two people if needed for safe lifting.

This replacement lamp cover protects and diffuses interior appliance light for even illumination and safe bulb containment. It restores a cracked, cloudy, or missing light lens to improve visibility inside the compartment. What it does:

• Protects the interior light bulb from impact, moisture, and food debris.
• Diffuses and softens the bulb's light for more even interior illumination.
• Stops rattling or falling lens issues caused by a cracked or broken cover.
• Helps prevent direct contact with the hot bulb and reduces glare.

• One lamp cover / light diffuser.

• Disconnect power or unplug the appliance before servicing to avoid electrical shock.
• Remove the old cover carefully and dispose of any broken pieces safely.
• Handle the replacement cover gently to avoid cracks; align and snap/slide into place per the original mounting.
• After installation, restore power and replace bulb if still dim or nonfunctional.

This Injet MRHOB assembly is a replacement component designed to restore the original part function in compatible appliances. It replaces a worn or damaged MRHOB assembly to help return the unit to normal operation. What it does:

• Serves as the direct replacement assembly for the appliance's Injet MRHOB component
• Restores mechanical/electrical connection where the original MRHOB has failed
• Can address symptoms such as intermittent operation, loss of function, or component-related error codes when the MRHOB is faulty
• Used when inspection shows the existing MRHOB is cracked, corroded, or otherwise damaged

• One Injet MRHOB assembly

• Install only after disconnecting power to the appliance to avoid shock or injury
• Refer to the OEM installation instructions for correct placement and wiring
• Use proper tools and replacement practices

The High Voltage Electrode and Harness Assembly is an OEM part for GE dual fuel ranges. It carries electrical current to spark gas pilots and oven/broiler ignitors. 

Symptoms of a faulty HV electrode and harness include:

• Pilot lights extinguishing or failing to light 
• Inconsistent ignition of gas burners and heating elements
• Arcing sounds emanating from the range top or oven areas

Causes involve cracks in porcelain insulators from thermal stress, worn electrodes after prolonged sparking, or wire insulation degraded by ambient heat over time.

This OEM part is also compatible with Hotpoint and RCA dual fuel range models.