Prd366whu/03 Parts

Replacement drip pan for gas cooktops and ranges. Sits beneath burners to catch spills and protect the cooktop base. Replace if cracked, warped, or rusted.

If your gas burner won't ignite or clicks continuously without lighting, the spark module may have failed. This electronic component generates sparks reliably.

This rotary potentiometer converts shaft rotation into an electrical signal the control board can read, providing precise position feedback for user selections. Replace it if inputs become erratic, jump between settings, or the control stops responding.

• Provides rotary position feedback to the electronic control
• Enables accurate selection and adjustment of functions or setpoints
• Wear or damage can cause drifting, dead spots, or incorrect readings
• Intermittent or no response to input is a common failure symptom

• Disconnect power before servicing
• Access the control/console area to reach the component
• Note shaft orientation and any connector positions; transfer exactly to the new part
• Handle electronics with ESD care and verify smooth, full-range operation after reassembly

Fix a squealing or non-working oven fan with this gas range blower fan motor. Restores even heat distribution during baking and broiling cycles.

Fix an oven light that won't turn on or a self-clean cycle that won't start. This door switch monitors door position for safety and lighting.

Secures panels and internal components in gas ranges. Replace this fastener if missing, rusted, or stripped to restore proper fit and alignment.

Replace a seized or corroded burner gas tube when igniters stop working or burners won't light. Delivers gas safely to surface burners. DIY repair.

Fix overheating or loud fan noise in your gas range with this cooling fan motor. Protects electronics by circulating air to cool internal components.

Stabilizing leveling foot for gas ranges. Provides balance and proper elevation. Replace if worn, broken, or missing to restore stability and positioning.

Replacement oven rack for gas ranges. Heavy-duty metal construction with powder-coated finish. Needed when original rack is warped, damaged, or missing.

This Jet is the small spray nozzle that directs a focused stream of water inside the dishwasher's wash system. Replacing a clogged or damaged jet helps restore proper spray coverage, wash pressure, and overall cleaning performance.

• Directs and meters water flow within the wash system
• Helps maintain spray arm/wash zone pressure and coverage
• Replace if clogged with mineral deposits or physically damaged
• Symptoms include poor cleaning, weak spray, unusual wash noise, or leaks near the nozzle

• Disconnect power and shut off the water supply before servicing
• Access the nozzle location and note its orientation and any seals/clips
• Clean mating surfaces; transfer any reusable seal/clip if present
• Seat and lock the jet fully; run a test cycle and check for leaks

If your gas range burners won't light or ignite intermittently, a worn ignition cable may be preventing spark delivery. Restores reliable ignition.

Tube component for gas ranges. Installs in the burner assembly or manifold area. Replace if cracked, damaged, or leaking to restore proper operation.

This is a replacement appliance tube that routes water or air inside compatible Bosch appliances to maintain proper operation and prevent leaks. Durable plastic construction restores the original pathway for fluids or airflow. What it does:

• Replaces a worn, cracked, or damaged internal tube to stop leaks or seepage
• Restores proper routing of water or air so the appliance can operate as designed
• Helps eliminate symptoms like visible leaking, pooling, or unusual odors from trapped moisture
• Works as a direct-fit replacement where the original tube has failed or deteriorated

• One replacement tube

• Disconnect power and turn off the water supply before beginning any repairs
• Compare the new tube to the original for length, fittings, and orientation before installing
• Use proper clamps or retainers as required by the appliance; secure connections to prevent leaks

This is a repair kit that is meant for the oven door. This kit includes the gasket that is applied to the perimeter of the oven door and prevents heat from leaking out, as well as the hinges which allow the oven door to open and close. Over time, the gasket may begin to wear out and not work as effectively at keeping the heat in the oven. This will make it difficult for the oven to maintain the temperature and can result in increased energy costs. The hinges may also wear out or break. If this is the case, the repair kit can be purchased to fix both issues.Allow the oven ample time to cool down completely before replacing any of these parts.This repair kit is sold individually and is sourced from the manufacturer. It is compatible with ovens that are manufactured by the Bosch brand.

Protective cap that covers openings or fasteners on your gas range. Replace when cracked, broken, or missing to restore a clean, finished appearance.