Prd366whu/03 Parts

This replacement tube routes water between internal components to maintain a sealed, reliable flow path. Swapping a cracked or hardened tube helps stop leaks and restore proper circulation and overall appliance performance.

• Carries water between internal components and maintains proper flow
• Helps keep connections watertight to prevent drips and pooling
• Replace if you see leaks, visible cracks, kinks, or a loose fit
• Restricted flow from a worn tube can contribute to reduced cleaning/performance

• Disconnect power and turn off the water supply before servicing; allow the unit to cool
• Remove access panels and keep towels handy for residual water
• Note the original routing and connection depth; transfer any fittings or clamps from the old tube if applicable
• Push the tube fully onto fittings and secure; run a test cycle and check carefully for leaks

If your burner won't light or gas flow is weak, this valve controls fuel delivery to each burner. Moderate difficulty repair, typically 30-60 minutes.

This fan motor drives the blower to move air through the appliance, restoring proper airflow for cooling or venting. Replacing a failing fan motor helps reduce overheating and improves overall performance. What it does:

• Spins the blower to circulate air for cooling, exhaust, or drying functions
• Restores proper airflow when the appliance has reduced ventilation
• Can stop or make noise if bearings are worn or the motor is failing
• Linked to overheating, reduced performance, or airflow-related error codes

• Disconnect power and any fuel lines before starting work
• Verify connector types and mounting points match the original motor prior to installation
• Handle the blower wheel and motor shaft carefully to avoid damage to the wheel or housing

This heating element warms wash water and helps dry dishes by raising dishwasher tub temperature for improved cleaning and drying results. Replaces a failed or damaged tub heater to restore normal wash-cycle heating. What it does:

• Heats dishwasher wash and rinse water so detergents activate and soils break down
• Speeds or improves drying performance by raising internal temperature during final cycles
• Commonly replaced when dishwasher shows no heat, poor cleaning, or poor drying
• Works with dishwasher controls and sensors to cycle heat during selected programs

• Disconnect power and water supply before starting work to avoid shock or flooding
• Drain the dishwasher and remove the lower access panel to reach the element assembly
• Handle the element and wiring gently; replace any damaged seals or grommets to prevent leaks
• Test operation and check for leaks after reinstalling panels and restoring power

If your range knob won't switch between settings or heat levels are stuck, this selector switch restores control. Straightforward repair for most DIYers.

This screw is a replacement fastener used to secure components on compatible Bosch appliances, restoring proper fit and reducing rattles or loose panels. It's a simple part that helps keep assemblies aligned and stable. What it does

• Secures panels, brackets, or small assemblies to prevent movement and noise
• Replaces a missing or stripped screw that can cause loose parts or gaps
• Helps restore normal operation when clips or fasteners have failed
• Works as a direct-fit fastener where the OEM screw is required

• Turn off and unplug the appliance before attempting any repair.
• Use the correct screwdriver or bit to avoid stripping the head.
• Tighten until snug—do not overtighten, which can damage threads or components.
• If a damaged thread or mating part is found, replace the mating hardware.

Protective sealing cap covers component connections to keep out dirt, moisture and debris. Replace if lost or damaged to maintain reliable operation. Confirm fit with your range model number.

Replacement hinge plate for gas range doors. Provides mounting surface for door hinge alignment. Replace if cracked, bent, or worn for proper support.

Adapter component for gas range cooktop assembly. Replaces broken, cracked, or missing adapters. Installs between burner components for proper fit.

This tube is an internal component that installs in your gas range. Replace it if the original tube is cracked, damaged, or missing to restore proper function.

Range air switch mounting bracket secures the ventilation activation switch in place. Direct replacement part for proper hood fan operation and mounting.

Replace your range's heat shield if it's cracked, warped, or damaged. This metal shield protects internal components from excessive heat during operation.

Replacement mounting bracket for gas ranges. Secures components in place. Order a new bracket if yours is bent, broken, or missing during installation.

Mounting bracket for gas ranges. Secures components in place. Replace if bracket is bent, cracked, broken, or missing to properly install range parts.

This replacement tube routes water safely through the appliance to the drain or internal reservoir, restoring proper flow and preventing leaks. It's a direct-fit service part when the original tube is cracked, split, or clogged. What it does

• Channels wastewater or condensate away from the appliance to the drain path
• Restores sealed water flow to prevent leaking or pooling inside the unit
• Stops symptoms like visible leaks, water under the appliance, or interrupted drain cycles
• Replaces brittle, cracked, or clogged tubing that no longer seals properly

• One replacement tube as shown

• Turn off power and shut off the water supply before starting any repair
• Inspect clamps, fittings, and nearby hoses; replace damaged hardware as needed
• Use proper clamps and ensure all connections are secure to prevent leaks

Burner ring that sits on top of the range cooktop around the burner element. Replace if yours is cracked, warped, discolored, or missing for a complete look.