Prg304 Parts

This control knob replaces a worn, broken, or missing stove/oven knob to restore safe, reliable control and improve the appliance's appearance. It fits directly onto the control shaft for a secure, tactile grip. What it does

• Replaces a damaged or missing control knob so you can set burners or oven functions accurately
• Provides a solid grip and clear pointer for selecting settings
• Stops slipping or spinning caused by a cracked or worn knob
• Helps restore normal operation when the original knob is loose or won't stay engaged

• Disconnect power (unplug appliance or switch off breaker) before servicing to avoid electrical or burn hazards.
• Pull the old knob straight off the control shaft; no special tools typically required.
• Align the new knob's splines with the shaft and push straight on until fully seated.
• Do not force the knob; if it does not fit, check shaft shape and orientation before applying pressure.

This replacement tube directs water inside the appliance to ensure proper flow where original tubing has worn, cracked, or become misrouted. It replaces a damaged or brittle tube to help restore normal water routing. What it does

• Channels water between internal components to prevent pooling or misdirection
• Replaces cracked, split, or kinked tubing that can cause leaks
• Helps eliminate intermittent draining or filling issues caused by damaged tubing
• Works as a direct-fit replacement when matched to the correct OEM part number

• The replacement tube shown

• Disconnect power and shut off water supply before starting any repair
• Inspect surrounding clips, grommets, and fittings; replace any that are worn
• Route the tube along the original path and secure with existing clamps or fasteners

This replacement tube routes water inside the appliance to restore proper flow and prevent leaks. It's a direct-fit service part when the original tube is cracked, split, or clogged and needs replacement. What it does:

• Channels water between internal components to maintain normal operation
• Restores proper water flow when the OEM tube is damaged or leaking
• Helps prevent water damage and interruption of appliance cycles caused by split or clogged tubing
• Compatible with the appliance's existing fittings and mounting points when used as a factory replacement

• One replacement tube as shown

• Recommended for users comfortable with basic appliance disassembly; follow manufacturer service manual for access steps
• Turn off power and shut off water supply before starting work
• Inspect clamps, seals and surrounding hoses while replacing; replace any worn fasteners or gaskets

This two-way valve controls water flow into the appliance, restoring proper fill and cycle operation when the valve fails. Direct-fit replacement designed to match OEM function and restore reliable water routing. What it does:

• Opens and closes to direct water to the correct circuit during wash/fill cycles
• Stops water flow when the appliance is off or when a fill cycle is complete
• Commonly replaced for symptoms like no fill, continuous filling, or leaking at the valve
• Provides the solenoid-actuated shutoff function used by the appliance control system

• Disconnect power and water supply before starting; verify the appliance is completely de-energized
• Drain remaining water and take photos of hose/electrical connections before removal to aid reassembly
• Use hand tools and avoid overtightening fittings to prevent damage; inspect inlet hoses and seals while replacing

Replacement water inlet valve that controls an appliance's incoming water flow for reliable fill and cycle operation. Replacing a faulty valve can stop no-fill, slow-fill, or continuous-fill issues and restore normal performance. What it does:

• Opens and closes to regulate water entering the appliance during fill cycles.
• Helps ensure correct water levels for proper washing or rinsing.
• Common symptom fixer for appliances that won't fill, fill slowly, or keep filling.
• May cause visible leaks at the valve or trigger fill-related fault behavior if failed.

• Turn off power and shut off the water supply before starting any work.
• Open a cycle or relieve pressure to drain residual water before removing the old valve.
• Inspect and replace any worn seals or inlet hoses when installing the new valve.
• Follow the appliance service manual for specific removal/installation steps.

This factory fastener secures panels, brackets, or internal components in your appliance. Replacing a worn, stripped, or missing screw helps keep parts aligned and tight, reducing vibration and preventing loosening during normal operation.

• Provides secure threaded attachment at the specified mounting points
• Helps maintain alignment of panels, brackets, and covers
• Replaces missing, rusted, or stripped hardware
• Typical symptoms: loose or rattling panel, misaligned trim, difficulty tightening, or a visibly missing screw

• Disconnect power and shut off gas/water before servicing
• Use the exact hardware specified for your model; lengths and threads are not interchangeable
• Hand-start threads to avoid cross-threading; tighten snugly—do not overtighten
• Retain and reuse any original washers or clips if present

This panel insert replaces a damaged or missing control-panel trim piece to restore the front appearance and support proper button alignment and sealing. It fits into the appliance's control area for a clean, finished look. What it does:

• Replaces cracked, faded, or otherwise damaged control-panel insert pieces
• Restores cosmetic finish and proper fit for control buttons and overlays
• Helps maintain a sealed control area against moisture and debris
• Prevents loose or misaligned panel edges that can interfere with operation

• Disconnect power to the appliance before starting any repair
• Handle edges carefully to avoid scratching or cutting; wear gloves if needed
• May require removal of the outer door or control bezel—use proper tools and follow the service manual

This panel insert is the replacement control-panel trim that restores a clean, finished look and protects the console area from scratches and wear. It fits into the console to cover and support the control surface. What it does:

• Replaces cracked, scratched, or cosmetically damaged control-panel trim
• Protects underlying buttons and electronics from everyday wear and spills
• Restores a uniform appearance to the appliance front for a like-new finish
• Helps ensure control buttons and labels sit correctly in the console area

• Disconnect power to the appliance before starting any repair
• Access may require removal of the console or outer door; follow the OEM service manual
• Handle the insert carefully to avoid scratches; align tabs/clips before applying pressure

This OEM replacement pin is a small hardware fastener used to secure or pivot mating components within the appliance. Replacing a worn or missing pin restores proper alignment and reliable movement of the affected part or linkage.

• Serves as an axle/retainer for hinges, brackets, or linkages
• Maintains alignment of moving parts to reduce wobble or binding
• When bent, worn, or missing, you may notice looseness, rattling, misalignment, or difficulty opening/closing related components
• Direct-fit OEM replacement for the specified application

• Disconnect electrical power and shut off water or gas before servicing
• Support the component being serviced to prevent strain or damage during removal/installation
• Note the original orientation and retain any washers, clips, or spacers for transfer to the new pin
• Inspect mating holes/bushings; replace related worn parts to ensure proper fit and operation

This grille for pan is a replacement trim piece that restores proper airflow and appearance around the appliance pan. It helps keep the pan area protected and looking finished after repair. What it does:

• Covers and ventilates the pan opening to help direct airflow and prevent debris entry
• Replaces a cracked, warped, or missing grille to restore fit and finish
• Helps eliminate rattling or rubbing caused by a damaged trim piece
• Matches OEM fit so it installs cleanly with the original mounting points

• Install requires removal of the surrounding trim or access panel; follow your appliance manual
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• Disconnect power to the appliance before working in the service area
• Replace damaged clips or screws with OEM fasteners for secure fit

This tension spring secures and balances moving assemblies, restoring proper door or component tension and smooth operation. Use it to replace a worn, stretched, or broken spring for reliable mechanical return force. What it does:

• Provides restoring tension to a door, latch, or moving linkage so it closes or returns smoothly
• Replaces weakened or broken springs that cause sagging, loose movement, or improper latching
• Helps correct symptoms like noisy operation, parts that won't stay closed, or uneven movement
• Works as a direct-fit replacement when the original spring has lost tension or snapped

• One replacement tension spring

• Turn power off and disconnect the appliance before servicing to avoid injury
• Inspect surrounding clips, pins, or mounting points and replace any damaged hardware
• Use pliers or appropriate tools to remove/install the spring carefully; springs can snap back

This surface burner replaces a damaged or worn cooktop burner to restore even, reliable heating for gas ranges and cooktops. It fits into the burner base and provides the proper flame pattern for cooking performance. What it does:

• Directs gas to the cooktop slot so the burner produces a controlled flame for cooking
• Restores even heating when an old burner causes uneven cooking or hot spots
• Helps eliminate weak or irregular flames caused by dents, warping, or corrosion
• Works with the existing burner base and ignition system when correctly matched

• One surface burner

• Turn off the appliance's gas and power before removing or installing the burner
• Remove grate and any clips or screws holding the old burner; seat the new burner securely in the burner base
• Clean surrounding surfaces and ports of debris before installation to ensure proper flame pattern