Prg305wh Parts

This is a replacement rotary potentiometer for appliance control panels—provides smooth variable input for temperature/speed/setting adjustments so the appliance responds correctly to user control changes. What it does:

• Acts as the variable resistor that the control knob uses to set temperature, speed, or other settings
• Restores accurate user input when original control becomes intermittent, jumps, or fails to change settings smoothly
• Helps eliminate erratic readouts or unresponsive knob adjustments linked to a worn or faulty potentiometer
• Works as the electronic interface between the knob and the appliance control board

• Disconnect power before accessing internal control panel to avoid shock or damage
• Handle PCB and connector pins carefully; avoid bending leads or contaminating contacts
• Replace only with the exact part number listed and reassemble panel alignment before testing

This glass shelf replaces a damaged or missing refrigerator shelf to restore usable storage space and keep items level and organized. Easy to clean and slides into existing shelf supports for a simple refresh. What it does:

• Provides a flat, stable surface for food containers and stored items.
• Replaces cracked, chipped or missing shelves that cause items to tip or fall.
• Allows quick cleaning and spill containment compared with wire shelving.
• Fits into existing shelf brackets or supports to restore original configuration.

• Remove food and items from the area before removing the old shelf.
• Support the shelf when removing or installing to avoid dropping or chipping the glass.
• Slide into existing shelf supports; do not force—check supports for damage first.
• Handle with care and dispose of broken glass safely; wear gloves and eye protection if shelf is damaged.

This transformer supplies the low-voltage power needed for an oven's interior lights so bulbs operate reliably. It restores proper lighting and helps stop flicker or complete loss of oven lamp function. What it does:

• Converts the oven's supply to the low-voltage output required by interior lamp circuits.
• Restores steady lamp operation when lights fail to come on or flicker.
• Works with the oven's light switch and control circuitry to deliver consistent voltage.
• Helps prevent false diagnostics caused by intermittent lamp power.

• One oven light transformer.

• Disconnect all power to the appliance before starting any repair.
• Accessible behind the control panel or chassis; remove panels carefully to reach the transformer.
• Note wire locations and secure all connectors; use proper wire connectors and strain relief.

This display is the user interface module that shows cycle status, settings and error indicators so you can read and control the appliance from the front panel. It restores visible feedback and menu information for normal operation. What it does

• Provides the visible display for cycle progress, timers and selected options
• Shows error codes and status messages to help identify issues
• Works with the appliance control board to update settings and user inputs
• Restores readable display after a failed or cracked panel

• Disconnect power to the appliance before starting work to avoid shock or damage
• Replacement typically requires removal of the front control or console panel; handle the display lens and ribbon connectors carefully
• Keep screws and small fasteners organized for reassembly

This reignition module controls and directs the spark to a cooktop's surface burners so they ignite reliably and re-spark if a flame goes out. It restores burner ignition performance and reduces persistent sparking. What it does:

• Sends high-voltage spark to the burner ignitors to light the gas flow
• Attempts automatic re-ignition when a flame is extinguished (safe, intermittent sparking)
• Stops sending spark when the burner control is off
• Commonly linked to symptoms like burners not lighting, constant clicking, or no spark at ignition

• Turn off electrical power and gas supply before servicing.
• Handle wiring and connector pins carefully; match connectors to avoid miswiring.
• Follow OEM instructions for removal and replacement.

This 1/4" gas supply tubing connects the appliance's gas line to the valve, providing a secure path for fuel so the unit can ignite and operate safely. Use when tubing is damaged, leaking, or replaced during valve service. What it does:

• Channels natural gas/LP from the household supply to the appliance valve
• Replaces cracked, corroded, or bent tubing that can cause leaks
• Helps stop symptoms like a persistent gas smell, failure to ignite, or intermittent burner operation
• Works with the appliance's inlet and control valve fittings to maintain proper gas flow

• Turn off the gas supply and electrical power before starting work
• Use approved fittings, thread sealant rated for gas, and test all connections for leaks after installation
• Do not modify or reuse damaged tubing; replace with exact-fit parts

Support, hinge counter restores proper hinge support and door balance for a worn or damaged hinge assembly. This replacement helps the appliance door open and close smoothly and stay aligned for reliable everyday use. What it does:

• Provides structural support to the door hinge and helps counterbalance the door
• Stabilizes hinge movement to reduce sagging, binding, or uneven closing
• Helps the door latch and seal correctly by keeping the hinge alignment consistent
• Use when you notice door droop, difficulty latching, or irregular door motion

• Installation may require partial disassembly of the door or hinge assembly—refer to the OEM instructions for your model
• Disconnect power and turn off water supply before beginning any repair
• Inspect surrounding hinge components and fasteners; replace any damaged parts and test door operation after installation

This control knob replaces a worn, broken, or missing stove/oven knob to restore safe, reliable control and improve the appliance's appearance. It fits directly onto the control shaft for a secure, tactile grip. What it does

• Replaces a damaged or missing control knob so you can set burners or oven functions accurately
• Provides a solid grip and clear pointer for selecting settings
• Stops slipping or spinning caused by a cracked or worn knob
• Helps restore normal operation when the original knob is loose or won't stay engaged

• Disconnect power (unplug appliance or switch off breaker) before servicing to avoid electrical or burn hazards.
• Pull the old knob straight off the control shaft; no special tools typically required.
• Align the new knob's splines with the shaft and push straight on until fully seated.
• Do not force the knob; if it does not fit, check shaft shape and orientation before applying pressure.

This replacement tube directs water inside the appliance to ensure proper flow where original tubing has worn, cracked, or become misrouted. It replaces a damaged or brittle tube to help restore normal water routing. What it does

• Channels water between internal components to prevent pooling or misdirection
• Replaces cracked, split, or kinked tubing that can cause leaks
• Helps eliminate intermittent draining or filling issues caused by damaged tubing
• Works as a direct-fit replacement when matched to the correct OEM part number

• The replacement tube shown

• Disconnect power and shut off water supply before starting any repair
• Inspect surrounding clips, grommets, and fittings; replace any that are worn
• Route the tube along the original path and secure with existing clamps or fasteners

This replacement tube routes water inside the appliance to restore proper flow and prevent leaks. It's a direct-fit service part when the original tube is cracked, split, or clogged and needs replacement. What it does:

• Channels water between internal components to maintain normal operation
• Restores proper water flow when the OEM tube is damaged or leaking
• Helps prevent water damage and interruption of appliance cycles caused by split or clogged tubing
• Compatible with the appliance's existing fittings and mounting points when used as a factory replacement

• One replacement tube as shown

• Recommended for users comfortable with basic appliance disassembly; follow manufacturer service manual for access steps
• Turn off power and shut off water supply before starting work
• Inspect clamps, seals and surrounding hoses while replacing; replace any worn fasteners or gaskets

This two-way valve controls water flow into the appliance, restoring proper fill and cycle operation when the valve fails. Direct-fit replacement designed to match OEM function and restore reliable water routing. What it does:

• Opens and closes to direct water to the correct circuit during wash/fill cycles
• Stops water flow when the appliance is off or when a fill cycle is complete
• Commonly replaced for symptoms like no fill, continuous filling, or leaking at the valve
• Provides the solenoid-actuated shutoff function used by the appliance control system

• Disconnect power and water supply before starting; verify the appliance is completely de-energized
• Drain remaining water and take photos of hose/electrical connections before removal to aid reassembly
• Use hand tools and avoid overtightening fittings to prevent damage; inspect inlet hoses and seals while replacing

Replacement water inlet valve that controls an appliance's incoming water flow for reliable fill and cycle operation. Replacing a faulty valve can stop no-fill, slow-fill, or continuous-fill issues and restore normal performance. What it does:

• Opens and closes to regulate water entering the appliance during fill cycles.
• Helps ensure correct water levels for proper washing or rinsing.
• Common symptom fixer for appliances that won't fill, fill slowly, or keep filling.
• May cause visible leaks at the valve or trigger fill-related fault behavior if failed.

• Turn off power and shut off the water supply before starting any work.
• Open a cycle or relieve pressure to drain residual water before removing the old valve.
• Inspect and replace any worn seals or inlet hoses when installing the new valve.
• Follow the appliance service manual for specific removal/installation steps.

This factory fastener secures panels, brackets, or internal components in your appliance. Replacing a worn, stripped, or missing screw helps keep parts aligned and tight, reducing vibration and preventing loosening during normal operation.

• Provides secure threaded attachment at the specified mounting points
• Helps maintain alignment of panels, brackets, and covers
• Replaces missing, rusted, or stripped hardware
• Typical symptoms: loose or rattling panel, misaligned trim, difficulty tightening, or a visibly missing screw

• Disconnect power and shut off gas/water before servicing
• Use the exact hardware specified for your model; lengths and threads are not interchangeable
• Hand-start threads to avoid cross-threading; tighten snugly—do not overtighten
• Retain and reuse any original washers or clips if present

This grate foot cushions and stabilizes a burner grate on your cooktop. Replacing worn or missing feet helps keep the grate level and protects the surface from scratches, rattling, and metal-on-porcelain contact during cooking.

• Provides a protective cushion between the grate and cooktop surface
• Helps keep cookware level by stabilizing the grate
• Reduces noise and vibration during burner operation
• Replace if feet are missing, flattened, cracked, or the grate rocks

• Turn off power/gas and allow the cooktop and grates to cool completely
• Remove the grate; clean the foot recess and any old adhesive or residue
• Press the new foot firmly into place; if your model uses adhesive, apply a manufacturer-approved high-temperature adhesive and allow it to cure as directed
• Reinstall the grate and verify it sits flat and stable before use

This panel insert replaces a damaged or missing control-panel trim piece to restore the front appearance and support proper button alignment and sealing. It fits into the appliance's control area for a clean, finished look. What it does:

• Replaces cracked, faded, or otherwise damaged control-panel insert pieces
• Restores cosmetic finish and proper fit for control buttons and overlays
• Helps maintain a sealed control area against moisture and debris
• Prevents loose or misaligned panel edges that can interfere with operation

• Disconnect power to the appliance before starting any repair
• Handle edges carefully to avoid scratching or cutting; wear gloves if needed
• May require removal of the outer door or control bezel—use proper tools and follow the service manual