Prg340gh/20 Parts

Replacement control knob for gas range. Restores grip on control shaft. Replace if cracked, stripped, worn, or missing to accurately select settings.

This is an indicator light or display component mounted on the range's control panel that provides visual feedback about oven or burner status. It lets you know when a heating element is active or when the oven has reached the set temperature. Replace this part if the indicator fails to illuminate, flickers intermittently, or displays incorrect information.

This LP main jet regulates propane flow to a surface burner to maintain a clean, stable flame. Replace a clogged or incorrect jet to restore proper burner performance, especially when converting a cooktop or range from natural gas to LP.

• Meters LP gas to the burner head for correct flame size and combustion
• Direct replacement for a damaged, clogged, or incorrect jet during service or LP conversion
• May help with yellow/sooty flames, weak or overly high flames, uneven heating, or delayed ignition

• Shut off gas and power; allow the appliance to cool completely
• Remove grates, caps, and burner head to access the orifice holder
• Start the jet by hand, then tighten gently with the correct tool—do not overtighten
• After installation or any LP conversion, leak-test connections and verify a steady blue flame; other jets and the regulator may also require LP settings per the model's instructions

This metal bracket securely holds the oven burner element in its proper position within the oven cavity. Replace it if the burner element sags, doesn't heat evenly, or if the bracket shows visible damage or warping from heat exposure.

This is a gas valve that controls the flow of gas to a surface burner on the cooktop. It connects to the burner control knob and regulates the flame from high to low settings. Replace this valve if the burner won't ignite, the flame is uneven or won't adjust properly, or if you detect a gas smell around the control area when the knob is in the off position.

This replacement tube directs water inside the appliance to ensure proper flow where original tubing has worn, cracked, or become misrouted. It replaces a damaged or brittle tube to help restore normal water routing. What it does

• Channels water between internal components to prevent pooling or misdirection
• Replaces cracked, split, or kinked tubing that can cause leaks
• Helps eliminate intermittent draining or filling issues caused by damaged tubing
• Works as a direct-fit replacement when matched to the correct OEM part number

• The replacement tube shown

• Disconnect power and shut off water supply before starting any repair
• Inspect surrounding clips, grommets, and fittings; replace any that are worn
• Route the tube along the original path and secure with existing clamps or fasteners

Fix a blank or unresponsive display screen with this gas range control panel display module. Restores cycle information, time remaining, and setting

1/4" gas supply tubing connects your range's gas line to the valve. Replace when damaged, cracked, leaking, or during valve service for safe operation.

The Heater Element Range is an OEM component for Bosch electric ranges. It is responsible for generating precise heat to cook foods and bake consistently.

Causes of a bad element range include scaling or mineral deposits from repeated cleanings that interfere with heat transfer. Broken coils from rough handling can also disrupt heat output.

Symptoms of a bad heater element range include:

• Long preheat times unable to reach desired heat  
• Burnt exteriors but raw interiors when baking
• Disabled or reluctant-to-heat oven and broiler functions
• Hot and cold spots causing inconsistent results

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

This two-way valve controls water flow into the appliance, restoring proper fill and cycle operation when the valve fails. Direct-fit replacement designed to match OEM function and restore reliable water routing. What it does:

• Opens and closes to direct water to the correct circuit during wash/fill cycles
• Stops water flow when the appliance is off or when a fill cycle is complete
• Commonly replaced for symptoms like no fill, continuous filling, or leaking at the valve
• Provides the solenoid-actuated shutoff function used by the appliance control system

• Disconnect power and water supply before starting; verify the appliance is completely de-energized
• Drain remaining water and take photos of hose/electrical connections before removal to aid reassembly
• Use hand tools and avoid overtightening fittings to prevent damage; inspect inlet hoses and seals while replacing

Replace a cracked, warped, or missing burner grate on your gas cooktop. This single grate supports cookware over the flame for stable cooking.

The Tube is a genuine OEM part for Bosch ranges. This part facilitates the delivery of gas to the surface burners, ensuring that they operate efficiently and safely. 

Over time, the Tube may exhibit signs of wear or damage due to rusting, physical damage or natural degradation.

Symptoms indicating the need for a new Tube include:

• A decrease in burner flame quality or uneven flames, which can affect cooking performance.
• The smell of gas in the vicinity of the range, signaling a potential gas leak.
• Difficulty igniting the surface burners or experiencing incomplete combustion.

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

Control panel trim insert that covers and protects the console area. Replaces cracked, scratched, or cosmetically damaged trim for a clean, finished look.

Grease catch tray installs under the grill or broiler area to collect drippings and overflow. Replace if cracked, warped, rusted, or missing.

The Switch is an OEM component specifically designed for select Bosch ranges. As an electronic safety device, it activates surface heating elements according to dial selections. 

Reinforced terminals withstand surges for prolonged component protection against current overloads. While insulated housings shield internal circuitry from accidental spills or pressure. 

Causes requiring switch replacement include sustained thermal degradation compromising internal contacts. Direct pressure or water damage could short precision mechanisms over decades of use.

Symptoms signaling the need for a new switch involve: 

• Failure to power one or more heating coils as set by dials   
• Constantly energized or uncontrollably cycling elements  
• Loosened or corroded connections produce arcing hazards

This OEM Bosch replacement switch is also compatible with Thermador, Gaggenau, and some Kenmore ranges relying on reliably sequenced ignition. Proper installation restores intended surface control functions to preset temperature specifications.