Prg366/1 Parts

This OEM replacement pin is a small hardware fastener used to secure or pivot mating components within the appliance. Replacing a worn or missing pin restores proper alignment and reliable movement of the affected part or linkage.

• Serves as an axle/retainer for hinges, brackets, or linkages
• Maintains alignment of moving parts to reduce wobble or binding
• When bent, worn, or missing, you may notice looseness, rattling, misalignment, or difficulty opening/closing related components
• Direct-fit OEM replacement for the specified application

• Disconnect electrical power and shut off water or gas before servicing
• Support the component being serviced to prevent strain or damage during removal/installation
• Note the original orientation and retain any washers, clips, or spacers for transfer to the new pin
• Inspect mating holes/bushings; replace related worn parts to ensure proper fit and operation

This replacement screw secures appliance panels and components in their proper position. Installing this screw restores a solid, factory fit and helps prevent vibration and misalignment.

• Fastens panels, brackets, or internal parts to the appliance chassis
• Maintains alignment to reduce vibration and rattling noises
• Replaces missing, rusty, or stripped hardware
• Typical symptoms include loose panels, gaps, rattles, or a screw that won't tighten

• Disconnect power (and shut off water or gas, if applicable) before servicing
• Support panels and watch for sharp edges and pinch points
• Use the correct driver size/type for your model to avoid stripping
• Start threads by hand to prevent cross-threading; tighten snugly without over-torquing

A Trident-style surface burner head that directs gas to the cooktop burner for an even, controlled flame. Replaces a worn or damaged burner head to restore consistent heating and safe operation. What it does:

• Directs and shapes the gas flame for proper cooking heat
• Restores even flame pattern when the original burner is warped or clogged
• Helps eliminate weak or irregular flames caused by damaged ports
• Works with the burner base and cap to maintain stable ignition

• Turn off the appliance and shut off gas/electric power before servicing
• Remove grates and burner cap, then replace the burner head; reassemble in reverse order
• Clean mating surfaces of debris or corrosion before installation for proper fit

This tension spring secures and balances moving assemblies, restoring proper door or component tension and smooth operation. Use it to replace a worn, stretched, or broken spring for reliable mechanical return force. What it does:

• Provides restoring tension to a door, latch, or moving linkage so it closes or returns smoothly
• Replaces weakened or broken springs that cause sagging, loose movement, or improper latching
• Helps correct symptoms like noisy operation, parts that won't stay closed, or uneven movement
• Works as a direct-fit replacement when the original spring has lost tension or snapped

• One replacement tension spring

• Turn power off and disconnect the appliance before servicing to avoid injury
• Inspect surrounding clips, pins, or mounting points and replace any damaged hardware
• Use pliers or appropriate tools to remove/install the spring carefully; springs can snap back

This push-button switch is a user-interface component that completes electrical circuits when pressed, restoring control to the affected function. It replaces a worn or failed switch to help regain reliable button response. What it does:

• Acts as the tactile electrical contact for a control or door function
• Restores responsiveness when a button no longer actuates the appliance
• Can stop intermittent operation caused by a worn or corroded switch contact
• Common symptom: controls or a specific function do not activate when the button is pressed

• One push-button switch as shown

• Disconnect power to the appliance before beginning any work
• Access may require removing a console or panel—keep track of fasteners and wire locations
• Disconnect wiring harness or terminals carefully; note connector orientation for reassembly
• Test the new switch with the power off using a multimeter continuity check before reassembly

This surface burner replaces a damaged or worn cooktop burner to restore even, reliable heating for gas ranges and cooktops. It fits into the burner base and provides the proper flame pattern for cooking performance. What it does:

• Directs gas to the cooktop slot so the burner produces a controlled flame for cooking
• Restores even heating when an old burner causes uneven cooking or hot spots
• Helps eliminate weak or irregular flames caused by dents, warping, or corrosion
• Works with the existing burner base and ignition system when correctly matched

• One surface burner

• Turn off the appliance's gas and power before removing or installing the burner
• Remove grate and any clips or screws holding the old burner; seat the new burner securely in the burner base
• Clean surrounding surfaces and ports of debris before installation to ensure proper flame pattern

This heat shield protects the area beneath the cooktop/oven from heat and accumulated spills, helping prevent damage to nearby components and simplifying cleanup. Designed to fit in the original mounting location. What it does:

• Deflects and dissipates heat away from sensitive components and cabinetry
• Catches and channels spills or drips away from burners and electrical parts
• Helps reduce risk of scorched surfaces and heat-related discoloration
• Restores proper clearance and protection after removal or damage

• Disconnect power (and gas, if applicable) and allow the appliance to cool completely before starting
• Handle carefully; edges may be sharp and mounting tabs can be fragile
• Verify correct orientation and secure mounting per manufacturer instructions

This is a cover that is used on ovens range. There are four of these covers per oven range unit, and they are located at the bottom of the appliance in each corner. These covers are part of the legs which support the oven range. These four covers are manufactured out of a black plastic material. These parts are fairly easy to replace. However, it may be difficult to access the parts are they are located at the bottom of the unit.A new cover may be needed if the original is cracked, broken, or damaged in any way. If any of these four covers are missing, the appliance will not stand level, and the missing covers will need to be replaced as soon as possible.This cover is a genuine Bosch part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific cover is compatible with oven ranges that are manufactured by the Bosch brand.

This receiver is the appliance's wireless signal module that helps the control system receive commands from the user interface or remote sensors, restoring responsive control and normal operation. What it does:

• Receives wireless or remote commands and passes them to the main control board
• Helps re-establish communication when the appliance ignores panel inputs or remote signals
• Can stop intermittent operation caused by lost or weak signal reception
• Works as part of the appliance's electronic control and user-interface system

• One receiver module

• Disconnect power to the appliance before beginning any repair to avoid shock or damage
• Handle the module by its housing; avoid touching electronic contacts or circuit traces
• Verify connector orientation and secure all wiring before powering the appliance