Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
The Jet Holder is an OEM part for Bosch ranges. It is responsible for securely housing components that generate flames and distribute heat across the cooktop surface. The jet holder ensures proper airflow and fuel ignition during operation.
Symptoms of a bad jet holder include:
Causes of a bad jet holder can include cracks developing from excessive heat cycling or debris buildup restricting gas/airflow. Mineral deposits may also cause fittings to warp and lead to improper alignment.
This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.
First and foremost, don't believe everything you see on Youtube. In order to get to the gas solenoid that feeds the burner you MUST take the entire top off that side of the range. Remove the grates and burner tops. You will see 2x 20mm brass nut, or so it appears, that hold each burner in place on the splash/drip pan. It is not just a nut, it is a venturi that threads down into what is called the jet holder. You may get a socket on it and think you are getting it loose but, more than likely you... Read more
Usually ships within 4 - 14 days
The Surface Burner Holder is an OEM part for Bosch ranges and cooktops. It serves to securely mount and support both the surface burner assembly and gas orifices in place on the cooktop.
Causes of a faulty or damaged burner and orifice holder can include wear from heavy daily cooking demands, broken mounting tabs due to impact or dropped cookware, or corrosion affecting the burner and orifice fittings over many years.
Symptoms of failure include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Upon disassembly, I found the burner gas tubes were seized in the burner assembly requiring destructive disassembly to remove them. After drilling these out, I was sure that it would take weeks to source all of the parts and get them back together. In three days all parts were at my door and the range was back together that day. Read more
The Ignition Device is an OEM part for Bosch ranges and ovens. Located near each gas burner, the ignition device provides the critical spark needed to light the burners during startup.
Causes of a bad ignition device can include wear from prolonged use over many years. Mineral buildup or debris accumulation may also prevent the spark from jumping across.
Symptoms of a bad ignition device include:
First I checked both spark igniters (range has two ovens) by testing them on the oven that did work. Both were good. I then checked the spark igniter wiring & it was good. At this point I contacted Appliance Parts Pros to ask which spark module I should order, the problem was that there wasn't a model number on the appliance. After speaking to the rep I ordered the ignition devise pictured above. Installed it and it worked! Read more
This gas pressure regulator controls and stabilizes incoming supply pressure to the appliance manifold, helping ensure consistent burner flames and reliable ignition. Replace if the original regulator is sticking or no longer maintaining correct pressure.
This replacement glass panel restores the appliance's original appearance and safe operation when the factory glass is cracked or shattered. It provides the designed glass barrier in the door or front fascia as specified by the manufacturer. What it does:
Replaced it. Read more
This inner door glass panel replaces the interior glass pane in the door assembly. It restores a clear, heat-resistant barrier so your appliance can retain heat and operate safely after the original pane cracks or shatters.
The oven door must be completely removed from the base oven before the repair can be done. The only caveat in to mark the inner dual pane assembly left and right before disassembly as this part is symmetrical and can be reversed on reassembly. This may lead to screw hole misalignment issues when larger door parts are reattached leading to confusion and frustration. Minor Dremel burring of the glass corners (one mm) was necessary for proper fit. Read more
This OEM replacement part is a motor assembly for ovens. The motor assembly is the main motor that powers the oven fan which is responsible for maintaining and adjusting the temperature in an oven. If the oven is no longer heating properly, turning on, or maintaining temperature, then the motor assembly will need to be replaced.To replace this part, make sure that the oven is unplugged. After it has been powered off, proceed to pull the oven out and away from the wall. Once moved, uninstall the back panel of the oven by removing the panel's mounting screws. After detaching the back panel, locate the motor housing on the back of the oven. Unthread the screws that hold the housing in place. Once removed, locate the mounting brackets that hold the motor in place and remove the screws that attach to the motor. Pull the old motor out of its place and install the new motor. Reinstall the back panel and restore power to the appliance.This genuine replacement part is sold individually and is compatible with Bosch, Gaggenau, and Thermador brand ovens.
The Telescopic Rack Oven is an OEM component specially designed for Bosch ranges. This rack system is equipped with a telescopic extension that allows easy access to racks while cooking or cleaning.
The telescopic rack oven plays an important role in maximizing capacity and efficiency. Its sliding design provides full access to multiple racks at once, allowing for convenient placement and removal of food items. This helps streamline the cooking process and optimize oven space.
Symptoms of a bad telescopic rack oven include:
Restore confident control of your appliance with this replacement control knob. It slides onto the control shaft to provide a secure, accurate grip so you can easily select settings when the original knob is cracked, stripped, or missing. What it does:
This LP main jet regulates propane flow to a surface burner to maintain a clean, stable flame. Replace a clogged or incorrect jet to restore proper burner performance, especially when converting a cooktop or range from natural gas to LP.
This bake solenoid controls gas flow to the main oven's bake burner. When energized by the control, it opens the safety valve so the igniter can light the flame and the oven can heat and maintain your set temperature. What it does:
The Door Switch is an OEM component specifically designed for Bosch ranges. It monitors the oven door position, engaging safety locks and activating illumination or interior fans as needed. Reliable performance ensures proper oven environment controls.
Causes of a bad door switch can involve normal wear and tear leading to sluggish or stuck movement over time. Exposure to heat or accidental impact may also damage delicate mechanisms requiring replacement.
Symptoms of a bad door switch include:
This OEM Bosch part is also compatible with Thermador and select Kenmore models.
The Knob is an OEM part for Bosch ranges. This knob allows users to control the temperature and cooking settings on their stove or oven effectively.
Causes of a bad knob can include prolonged exposure to heat, which can cause the material to degrade, accidental damage, or normal wear and tear that leads to cracking or breaking.
Symptoms of a bad knob include:
I ordered a replacement part from your company. Read more
This cooktop burner grate supports cookware over the flame, keeping pots and pans stable during use. Replace a cracked or warped grate to restore a level cooking surface and proper clearance above the burners.
This replacement tube routes water inside the appliance to restore proper flow and prevent leaks. It's a direct-fit service part when the original tube is cracked, split, or clogged and needs replacement. What it does:
Replaced tube and burner holder. Read more