Prg366 Propane Parts

The Switch is an OEM component specifically designed for select Bosch ranges. As an electronic safety device, it activates surface heating elements according to dial selections. 

Reinforced terminals withstand surges for prolonged component protection against current overloads. While insulated housings shield internal circuitry from accidental spills or pressure. 

Causes requiring switch replacement include sustained thermal degradation compromising internal contacts. Direct pressure or water damage could short precision mechanisms over decades of use.

Symptoms signaling the need for a new switch involve: 

• Failure to power one or more heating coils as set by dials   
• Constantly energized or uncontrollably cycling elements  
• Loosened or corroded connections produce arcing hazards

This OEM Bosch replacement switch is also compatible with Thermador, Gaggenau, and some Kenmore ranges relying on reliably sequenced ignition. Proper installation restores intended surface control functions to preset temperature specifications.
 

This surface burner replaces a damaged or worn cooktop burner to restore even, reliable heating for gas ranges and cooktops. It fits into the burner base and provides the proper flame pattern for cooking performance. What it does:

• Directs gas to the cooktop slot so the burner produces a controlled flame for cooking
• Restores even heating when an old burner causes uneven cooking or hot spots
• Helps eliminate weak or irregular flames caused by dents, warping, or corrosion
• Works with the existing burner base and ignition system when correctly matched

• One surface burner

• Turn off the appliance's gas and power before removing or installing the burner
• Remove grate and any clips or screws holding the old burner; seat the new burner securely in the burner base
• Clean surrounding surfaces and ports of debris before installation to ensure proper flame pattern

This is a factory-style screw used to secure appliance panels and components for a reliable, low-profile hold. It replaces worn or missing fasteners to stop rattling and keep parts aligned during normal use. What it does:

• Secures trim, panels, brackets or small components in place
• Stops loose parts that can cause rattling or vibration noises
• Restores correct fit where a missing or damaged screw allows gaps
• Works as a direct replacement when the original fastener is lost or stripped

• One screw

• Disconnect power and water before servicing the appliance
• Start the screw by hand to avoid cross-threading; use the correct driver bit
• Tighten snugly but avoid over-torquing to prevent stripping or part damage
• Keep removed hardware organized to ensure correct reassembly

A Trident-style surface burner head that directs gas to the cooktop burner for an even, controlled flame. Replaces a worn or damaged burner head to restore consistent heating and safe operation. What it does:

• Directs and shapes the gas flame for proper cooking heat
• Restores even flame pattern when the original burner is warped or clogged
• Helps eliminate weak or irregular flames caused by damaged ports
• Works with the burner base and cap to maintain stable ignition

• Turn off the appliance and shut off gas/electric power before servicing
• Remove grates and burner cap, then replace the burner head; reassemble in reverse order
• Clean mating surfaces of debris or corrosion before installation for proper fit

This heat shield protects the area beneath the cooktop/oven from heat and accumulated spills, helping prevent damage to nearby components and simplifying cleanup. Designed to fit in the original mounting location. What it does:

• Deflects and dissipates heat away from sensitive components and cabinetry
• Catches and channels spills or drips away from burners and electrical parts
• Helps reduce risk of scorched surfaces and heat-related discoloration
• Restores proper clearance and protection after removal or damage

• Disconnect power (and gas, if applicable) and allow the appliance to cool completely before starting
• Handle carefully; edges may be sharp and mounting tabs can be fragile
• Verify correct orientation and secure mounting per manufacturer instructions

This is a replacement grease tray cover that restores the oven/cooktop drip area to help contain grease and protect the tray below. It improves grease containment and keeps the cooking area looking finished. What it does:

• Covers the grease collection area to help contain drips and splatters
• Helps prevent grease from pooling on the tray and reduces cleanup
• Restores a damaged or missing cover so the appliance looks and functions correctly
• Can reduce smoke and odors caused by exposed grease buildup

• One grease tray cover

• Ensure the appliance is completely cool and power/gas is turned off before starting
• Remove the old cover and clean the tray area; use gloves to handle greasy parts
• Align the new cover with the tray opening and seat it in place per the appliance instructions

This is a cover that is used on ovens range. There are four of these covers per oven range unit, and they are located at the bottom of the appliance in each corner. These covers are part of the legs which support the oven range. These four covers are manufactured out of a black plastic material. These parts are fairly easy to replace. However, it may be difficult to access the parts are they are located at the bottom of the unit.A new cover may be needed if the original is cracked, broken, or damaged in any way. If any of these four covers are missing, the appliance will not stand level, and the missing covers will need to be replaced as soon as possible.This cover is a genuine Bosch part and is an OEM part sourced directly from the manufacturer. It is sold individually. This specific cover is compatible with oven ranges that are manufactured by the Bosch brand.