Prg366eh/06 Parts

Replacement water inlet valve that controls an appliance's incoming water flow for reliable fill and cycle operation. Replacing a faulty valve can stop no-fill, slow-fill, or continuous-fill issues and restore normal performance. What it does:

• Opens and closes to regulate water entering the appliance during fill cycles.
• Helps ensure correct water levels for proper washing or rinsing.
• Common symptom fixer for appliances that won't fill, fill slowly, or keep filling.
• May cause visible leaks at the valve or trigger fill-related fault behavior if failed.

• Turn off power and shut off the water supply before starting any work.
• Open a cycle or relieve pressure to drain residual water before removing the old valve.
• Inspect and replace any worn seals or inlet hoses when installing the new valve.
• Follow the appliance service manual for specific removal/installation steps.

This replacement tube directs water inside the appliance to ensure proper flow where original tubing has worn, cracked, or become misrouted. It replaces a damaged or brittle tube to help restore normal water routing. What it does

• Channels water between internal components to prevent pooling or misdirection
• Replaces cracked, split, or kinked tubing that can cause leaks
• Helps eliminate intermittent draining or filling issues caused by damaged tubing
• Works as a direct-fit replacement when matched to the correct OEM part number

• The replacement tube shown

• Disconnect power and shut off water supply before starting any repair
• Inspect surrounding clips, grommets, and fittings; replace any that are worn
• Route the tube along the original path and secure with existing clamps or fasteners

The Lamp is an OEM part for Bosch ranges and ovens. The range lamp provides visibility when viewing food through the oven window or checking on items cooking on the stove.

Causes of a bad range lamp can include normal wear and tear over time, as well as accidental damage from impact or handle mishandling.

Symptoms of a bad range lamp include:

• Diminished light that does not adequately illuminate the cooking space
• Flickering or unstable illumination
• A burned out or broken bulb

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This panel insert replaces a damaged or missing control-panel trim piece to restore the front appearance and support proper button alignment and sealing. It fits into the appliance's control area for a clean, finished look. What it does:

• Replaces cracked, faded, or otherwise damaged control-panel insert pieces
• Restores cosmetic finish and proper fit for control buttons and overlays
• Helps maintain a sealed control area against moisture and debris
• Prevents loose or misaligned panel edges that can interfere with operation

• Disconnect power to the appliance before starting any repair
• Handle edges carefully to avoid scratching or cutting; wear gloves if needed
• May require removal of the outer door or control bezel—use proper tools and follow the service manual

This panel insert is the replacement control-panel trim that restores a clean, finished look and protects the console area from scratches and wear. It fits into the console to cover and support the control surface. What it does:

• Replaces cracked, scratched, or cosmetically damaged control-panel trim
• Protects underlying buttons and electronics from everyday wear and spills
• Restores a uniform appearance to the appliance front for a like-new finish
• Helps ensure control buttons and labels sit correctly in the console area

• Disconnect power to the appliance before starting any repair
• Access may require removal of the console or outer door; follow the OEM service manual
• Handle the insert carefully to avoid scratches; align tabs/clips before applying pressure

This OEM replacement pin is a small hardware fastener used to secure or pivot mating components within the appliance. Replacing a worn or missing pin restores proper alignment and reliable movement of the affected part or linkage.

• Serves as an axle/retainer for hinges, brackets, or linkages
• Maintains alignment of moving parts to reduce wobble or binding
• When bent, worn, or missing, you may notice looseness, rattling, misalignment, or difficulty opening/closing related components
• Direct-fit OEM replacement for the specified application

• Disconnect electrical power and shut off water or gas before servicing
• Support the component being serviced to prevent strain or damage during removal/installation
• Note the original orientation and retain any washers, clips, or spacers for transfer to the new pin
• Inspect mating holes/bushings; replace related worn parts to ensure proper fit and operation

This grille for pan is a replacement trim piece that restores proper airflow and appearance around the appliance pan. It helps keep the pan area protected and looking finished after repair. What it does:

• Covers and ventilates the pan opening to help direct airflow and prevent debris entry
• Replaces a cracked, warped, or missing grille to restore fit and finish
• Helps eliminate rattling or rubbing caused by a damaged trim piece
• Matches OEM fit so it installs cleanly with the original mounting points

• Install requires removal of the surrounding trim or access panel; follow your appliance manual
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• Disconnect power to the appliance before working in the service area
• Replace damaged clips or screws with OEM fasteners for secure fit

This replacement cover is an exterior access panel that protects internal components and finishes the appliance for a clean look. It restores a sealed barrier over controls and wiring to help keep parts secure and reduce drafts. What it does:

• Covers and protects internal wiring, terminals and small components from debris and accidental contact
• Restores finished appearance where a damaged or missing panel left an opening
• Reduces rattling or vibration caused by loose or broken panels
• Helps prevent moisture and foreign objects from entering the service area

• One cover

• Disconnect power to the appliance before starting any work
• Installation may require removing screws or unclipping snap-in fasteners; keep hardware if reusing
• Handle edges carefully—use gloves to avoid cuts on sheet-metal edges

This replacement tube routes water or fluid between internal components to restore proper flow and prevent leaks. It's a simple, direct-fit part used in appliance fluid pathways for reliable performance. What it does:

• Directs water or fluid between components (pump, valve, dispenser) to maintain normal operation
• Replaces cracked, clogged, or collapsed tubing that can cause poor flow or leaks
• Helps eliminate intermittent filling or draining issues and related error indications
• Restores sealed connections when used with proper clamps and fittings

• Disconnect power and shut off the water supply before starting work
• Remove any clamps or fittings securing the old tube; note routing for reinstallation
• Trim to fit only if explicitly required by your model; use proper hose clamps to secure connections
• Inspect adjacent fittings and seals; test the appliance for leaks after installation