Prg486jdg/10 Parts

This 1/4" gas supply tubing connects the appliance's gas line to the valve, providing a secure path for fuel so the unit can ignite and operate safely. Use when tubing is damaged, leaking, or replaced during valve service. What it does:

• Channels natural gas/LP from the household supply to the appliance valve
• Replaces cracked, corroded, or bent tubing that can cause leaks
• Helps stop symptoms like a persistent gas smell, failure to ignite, or intermittent burner operation
• Works with the appliance's inlet and control valve fittings to maintain proper gas flow

• Turn off the gas supply and electrical power before starting work
• Use approved fittings, thread sealant rated for gas, and test all connections for leaks after installation
• Do not modify or reuse damaged tubing; replace with exact-fit parts

The Heater Element Range is an OEM component for Bosch electric ranges. It is responsible for generating precise heat to cook foods and bake consistently.

Causes of a bad element range include scaling or mineral deposits from repeated cleanings that interfere with heat transfer. Broken coils from rough handling can also disrupt heat output.

Symptoms of a bad heater element range include:

• Long preheat times unable to reach desired heat  
• Burnt exteriors but raw interiors when baking
• Disabled or reluctant-to-heat oven and broiler functions
• Hot and cold spots causing inconsistent results

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.

This two-way valve controls water flow into the appliance, restoring proper fill and cycle operation when the valve fails. Direct-fit replacement designed to match OEM function and restore reliable water routing. What it does:

• Opens and closes to direct water to the correct circuit during wash/fill cycles
• Stops water flow when the appliance is off or when a fill cycle is complete
• Commonly replaced for symptoms like no fill, continuous filling, or leaking at the valve
• Provides the solenoid-actuated shutoff function used by the appliance control system

• Disconnect power and water supply before starting; verify the appliance is completely de-energized
• Drain remaining water and take photos of hose/electrical connections before removal to aid reassembly
• Use hand tools and avoid overtightening fittings to prevent damage; inspect inlet hoses and seals while replacing

This electronic control board manages a dishwasher's core functions, coordinating cycles, timing, and user interface so the appliance runs the selected wash program reliably. Replacing a failed control restores normal operation and responds to user inputs. What it does:

• Acts as the dishwasher's main logic board to control cycle selection, timing, and sequence
• Manages signals for fill, wash, drain, and pump operation
• Interfaces with the front panel and displays to process user inputs
• Prevents or causes missed cycles, unresponsive controls, or erratic behavior when faulty

• Disconnect all power to the appliance before starting—risk of electric shock
• Handle the board by edges and avoid static discharge; use an anti-static wrist strap if available
• Verify connector orientation and secure all wiring; do not force connectors

Replacement water inlet valve that controls an appliance's incoming water flow for reliable fill and cycle operation. Replacing a faulty valve can stop no-fill, slow-fill, or continuous-fill issues and restore normal performance. What it does:

• Opens and closes to regulate water entering the appliance during fill cycles.
• Helps ensure correct water levels for proper washing or rinsing.
• Common symptom fixer for appliances that won't fill, fill slowly, or keep filling.
• May cause visible leaks at the valve or trigger fill-related fault behavior if failed.

• Turn off power and shut off the water supply before starting any work.
• Open a cycle or relieve pressure to drain residual water before removing the old valve.
• Inspect and replace any worn seals or inlet hoses when installing the new valve.
• Follow the appliance service manual for specific removal/installation steps.

This panel insert replaces a damaged or missing control-panel trim piece to restore the front appearance and support proper button alignment and sealing. It fits into the appliance's control area for a clean, finished look. What it does:

• Replaces cracked, faded, or otherwise damaged control-panel insert pieces
• Restores cosmetic finish and proper fit for control buttons and overlays
• Helps maintain a sealed control area against moisture and debris
• Prevents loose or misaligned panel edges that can interfere with operation

• Disconnect power to the appliance before starting any repair
• Handle edges carefully to avoid scratching or cutting; wear gloves if needed
• May require removal of the outer door or control bezel—use proper tools and follow the service manual

The Lamp is an OEM part for Bosch ranges and ovens. The range lamp provides visibility when viewing food through the oven window or checking on items cooking on the stove.

Causes of a bad range lamp can include normal wear and tear over time, as well as accidental damage from impact or handle mishandling.

Symptoms of a bad range lamp include:

• Diminished light that does not adequately illuminate the cooking space
• Flickering or unstable illumination
• A burned out or broken bulb

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This panel insert is the replacement control-panel trim that restores a clean, finished look and protects the console area from scratches and wear. It fits into the console to cover and support the control surface. What it does:

• Replaces cracked, scratched, or cosmetically damaged control-panel trim
• Protects underlying buttons and electronics from everyday wear and spills
• Restores a uniform appearance to the appliance front for a like-new finish
• Helps ensure control buttons and labels sit correctly in the console area

• Disconnect power to the appliance before starting any repair
• Access may require removal of the console or outer door; follow the OEM service manual
• Handle the insert carefully to avoid scratches; align tabs/clips before applying pressure

This OEM replacement pin is a small hardware fastener used to secure or pivot mating components within the appliance. Replacing a worn or missing pin restores proper alignment and reliable movement of the affected part or linkage.

• Serves as an axle/retainer for hinges, brackets, or linkages
• Maintains alignment of moving parts to reduce wobble or binding
• When bent, worn, or missing, you may notice looseness, rattling, misalignment, or difficulty opening/closing related components
• Direct-fit OEM replacement for the specified application

• Disconnect electrical power and shut off water or gas before servicing
• Support the component being serviced to prevent strain or damage during removal/installation
• Note the original orientation and retain any washers, clips, or spacers for transfer to the new pin
• Inspect mating holes/bushings; replace related worn parts to ensure proper fit and operation

This replacement screw secures appliance panels and components in their proper position. Installing this screw restores a solid, factory fit and helps prevent vibration and misalignment.

• Fastens panels, brackets, or internal parts to the appliance chassis
• Maintains alignment to reduce vibration and rattling noises
• Replaces missing, rusty, or stripped hardware
• Typical symptoms include loose panels, gaps, rattles, or a screw that won't tighten

• Disconnect power (and shut off water or gas, if applicable) before servicing
• Support panels and watch for sharp edges and pinch points
• Use the correct driver size/type for your model to avoid stripping
• Start threads by hand to prevent cross-threading; tighten snugly without over-torquing

This grille for pan is a replacement trim piece that restores proper airflow and appearance around the appliance pan. It helps keep the pan area protected and looking finished after repair. What it does:

• Covers and ventilates the pan opening to help direct airflow and prevent debris entry
• Replaces a cracked, warped, or missing grille to restore fit and finish
• Helps eliminate rattling or rubbing caused by a damaged trim piece
• Matches OEM fit so it installs cleanly with the original mounting points

• Install requires removal of the surrounding trim or access panel; follow your appliance manual
• Handle carefully to avoid scratching the finish; use non-marring tools as needed
• Disconnect power to the appliance before working in the service area
• Replace damaged clips or screws with OEM fasteners for secure fit

This tension spring secures and balances moving assemblies, restoring proper door or component tension and smooth operation. Use it to replace a worn, stretched, or broken spring for reliable mechanical return force. What it does:

• Provides restoring tension to a door, latch, or moving linkage so it closes or returns smoothly
• Replaces weakened or broken springs that cause sagging, loose movement, or improper latching
• Helps correct symptoms like noisy operation, parts that won't stay closed, or uneven movement
• Works as a direct-fit replacement when the original spring has lost tension or snapped

• One replacement tension spring

• Turn power off and disconnect the appliance before servicing to avoid injury
• Inspect surrounding clips, pins, or mounting points and replace any damaged hardware
• Use pliers or appropriate tools to remove/install the spring carefully; springs can snap back

This push-button switch is a user-interface component that completes electrical circuits when pressed, restoring control to the affected function. It replaces a worn or failed switch to help regain reliable button response. What it does:

• Acts as the tactile electrical contact for a control or door function
• Restores responsiveness when a button no longer actuates the appliance
• Can stop intermittent operation caused by a worn or corroded switch contact
• Common symptom: controls or a specific function do not activate when the button is pressed

• One push-button switch as shown

• Disconnect power to the appliance before beginning any work
• Access may require removing a console or panel—keep track of fasteners and wire locations
• Disconnect wiring harness or terminals carefully; note connector orientation for reassembly
• Test the new switch with the power off using a multimeter continuity check before reassembly

This surface burner replaces a damaged or worn cooktop burner to restore even, reliable heating for gas ranges and cooktops. It fits into the burner base and provides the proper flame pattern for cooking performance. What it does:

• Directs gas to the cooktop slot so the burner produces a controlled flame for cooking
• Restores even heating when an old burner causes uneven cooking or hot spots
• Helps eliminate weak or irregular flames caused by dents, warping, or corrosion
• Works with the existing burner base and ignition system when correctly matched

• One surface burner

• Turn off the appliance's gas and power before removing or installing the burner
• Remove grate and any clips or screws holding the old burner; seat the new burner securely in the burner base
• Clean surrounding surfaces and ports of debris before installation to ensure proper flame pattern