Prgs304ss Parts

This kit includes a simmer control board that regulates low-heat burner operation on the cooktop, allowing precise temperature control at simmer settings. The board manages the cycling of the burner element to maintain consistent low temperatures. Replace this kit if your burners won't maintain a simmer, cycle erratically at low settings, or if the existing control board shows signs of damage or failure.

This electronic PC board is the appliance's main control, processing inputs and directing power to components so cycles run correctly. Replacing a failed board can restore normal operation when the unit is dead, won't start, or stops mid-cycle.

• Interprets user inputs and sensor feedback to execute programmed cycles
• Switches relays to power motors, valves, heaters, and other loads as required
• Manages timing, temperature, and safety logic for consistent performance
• Typical failure symptoms: no power/won't start, unresponsive or erratic controls, cycles ending prematurely, recurring error codes

• Disconnect power before servicing; verify power is off with a meter
• Use ESD protection; handle the board by the edges to avoid static damage
• Move connectors one at a time to identical positions on the new board to prevent miswiring
• Some models require service-mode setup or calibration after installation—follow your model's service documentation

This is a wire oven rack designed to glide smoothly in and out of the oven cavity on built-in rail supports. It provides a sturdy surface for holding cookware and bakeware at various positions inside the oven. Replace this shelf if it is warped, rusted, has broken wires, or no longer glides properly on the oven rails.

Gas supply tube connects gas line to range burners. Replace if cracked, kinked, damaged, or leaking. Installs between supply valve and burner assembly.

Replacement control knob for gas range. Restores grip on control shaft. Replace if cracked, stripped, worn, or missing to accurately select settings.

This LP main jet regulates propane flow to a surface burner to maintain a clean, stable flame. Replace a clogged or incorrect jet to restore proper burner performance, especially when converting a cooktop or range from natural gas to LP.

• Meters LP gas to the burner head for correct flame size and combustion
• Direct replacement for a damaged, clogged, or incorrect jet during service or LP conversion
• May help with yellow/sooty flames, weak or overly high flames, uneven heating, or delayed ignition

• Shut off gas and power; allow the appliance to cool completely
• Remove grates, caps, and burner head to access the orifice holder
• Start the jet by hand, then tighten gently with the correct tool—do not overtighten
• After installation or any LP conversion, leak-test connections and verify a steady blue flame; other jets and the regulator may also require LP settings per the model's instructions

This metal bracket securely holds the oven burner element in its proper position within the oven cavity. Replace it if the burner element sags, doesn't heat evenly, or if the bracket shows visible damage or warping from heat exposure.

This is a gas valve that controls the flow of gas to a surface burner on the cooktop. It connects to the burner control knob and regulates the flame from high to low settings. Replace this valve if the burner won't ignite, the flame is uneven or won't adjust properly, or if you detect a gas smell around the control area when the knob is in the off position.

Fix a blank or unresponsive display screen with this gas range control panel display module. Restores cycle information, time remaining, and setting

Burner won't stop sparking or won't ignite? The reignition module controls spark to ignite burners and re-light if flame goes out. Moderate difficulty repair.

1/4" gas supply tubing connects your range's gas line to the valve. Replace when damaged, cracked, leaking, or during valve service for safe operation.

The Heater Element Range is an OEM component for Bosch electric ranges. It is responsible for generating precise heat to cook foods and bake consistently.

Causes of a bad element range include scaling or mineral deposits from repeated cleanings that interfere with heat transfer. Broken coils from rough handling can also disrupt heat output.

Symptoms of a bad heater element range include:

• Long preheat times unable to reach desired heat  
• Burnt exteriors but raw interiors when baking
• Disabled or reluctant-to-heat oven and broiler functions
• Hot and cold spots causing inconsistent results

This OEM Bosch part can also be used on Thermador and Gaggenau appliances.