Psa1200rww001 Parts

A direct-replacement supporter housing that secures and aligns internal components for stable operation. Restores proper positioning inside the appliance so parts sit correctly and function as intended. What it does

• Provides a secure mounting point and structural support for internal components.
• Keeps parts properly aligned to prevent binding, rubbing, or premature wear.
• Helps reduce movement that can lead to rattling or vibration-related noise.
• Maintains correct clearances so associated parts operate smoothly.

• Disconnect power (and water if applicable) before starting any repair.
• Basic hand tools required; handle plastic housings gently to avoid cracking.
• Verify proper orientation and secure fasteners snugly—do not overtighten.

The Stirrer Fan Cover Assembly is an OEM part for GE microwaves. It covers and protects the stirrer fan, which distributes microwave energy evenly within the cooking cavity, ensuring food is heated uniformly.

Causes of a bad stirrer fan cover assembly can include exposure to high heat, physical damage from improper handling, or buildup of food particles and grease over time.

Symptoms of a bad stirrer fan cover assembly include:

• Uneven cooking or heating of food
• Rattling or unusual noises during operation
• Visible damage or warping of the cover
• The cover not fitting securely in place

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Turntable shaft that connects the microwave motor to the glass tray so the turntable rotates smoothly for more even heating. Replacing a worn or broken shaft helps stop wobbling, slipping, or scraping during rotation. What it does:

• Transfers rotation from the motor to the glass turntable so dishes rotate while cooking.
• Centers and supports the glass tray to reduce wobble and ensure consistent rotation.
• Use when the tray won't turn, slips on the motor coupler, or makes knocking/scraping noises.
• Fits into the turntable coupler and works with the roller ring and glass tray to maintain stable motion.

• 1 turntable shaft

• Disconnect power before servicing and remove the glass tray and roller ring to access the shaft.
• Shaft typically presses into the motor coupler; remove the old shaft and press the replacement into place.
• Inspect the roller ring and glass tray for damage when replacing the shaft; replace any worn pieces for best results.

This auxiliary cooktop holder is a replacement support bracket that helps keep the cooktop or burner assembly aligned and secure for stable, rattle-free operation. Restores proper positioning of components after wear or damage. What it does

• Supports and anchors the cooktop/burner assembly to prevent shifting during use
• Keeps burner and trim pieces aligned for even surface contact and safe operation
• Reduces rattling, vibration, and gaps between cooktop components
• Helps restore secure mounting after broken or worn original brackets

• Disconnect power (and gas, if applicable) before starting any repair
• Use proper hand tools; part secures with fasteners—retain and reinstall all screws
• Watch for sharp sheet-metal edges and wear safety gloves and eye protection

This circulation motor powers air movement inside the appliance to maintain proper airflow and even temperatures. Replacing a failed motor restores circulation for more consistent cooling and reduces noise or performance issues. What it does:

• Spins the fan to circulate air through the cooling/ventilation path
• Helps maintain even temperatures and proper airflow in the appliance
• Commonly replaced when airflow is weak, cooling is uneven, or the motor is noisy
• Stops operation if the motor fails, which can lead to frost buildup or reduced performance

• Disconnect power to the appliance before starting any repair
• Access and mounting steps vary by model; follow the appliance's service manual or wiring diagram
• Handle wiring connectors carefully and confirm proper fan rotation before reassembly

This wiring harness connects the appliance's control and power circuits so switches, sensors and the control board can communicate and receive power. Replacing a damaged harness restores reliable electrical connections and component signaling. What it does:

• Carries power and signals between the control board and components
• Routes multiple connector leads to the correct appliance parts
• Prevents intermittent or lost connections caused by broken or burned wires
• Helps resolve failures where controls, lights or functions are unresponsive

• Disconnect power before starting work to avoid shock or damage
• Label or photograph connector locations for correct reassembly
• Inspect mounting points and routing to avoid pinching or contact with sharp edges
• If connectors are corroded or damaged, replace the harness rather than splicing

This mount vent motor cover secures and protects the dryer vent motor assembly so the motor stays aligned and free from debris. It helps reduce abnormal noise and vibration while maintaining safe airflow through the vent housing. What it does:

• Secures the vent motor to the housing to keep the motor stable during operation
• Protects the motor from lint, dust, and foreign objects that can cause damage
• Helps reduce rattling, vibration, and noise caused by a loose motor mount
• Maintains proper airflow routing around the vent motor for efficient operation

• Disconnect power to the appliance before starting any repair
• Use basic hand tools; retain or replace any mounting screws as needed
• Watch for sharp sheet-metal edges and wear gloves to protect your hands
• Verify motor alignment and secure fasteners snugly but avoid over-tightening

This fan assembly circulates air inside the appliance to help maintain proper cooling and airflow, restoring efficient operation and reducing temperature and moisture-related issues. What it does:

• Moves air through the appliance evaporator and cabinet to support temperature regulation
• Helps prevent warm spots and excess frost buildup by improving airflow
• Reduces overheating of components by improving ventilation
• Stops unusual noise or vibration when a worn fan is replaced

• Disconnect power before servicing to avoid electrical shock.
• Handle the fan blades carefully to avoid damage or injury.
• Verify proper mounting orientation and connector seating during installation.
• Test operation after installation and reassemble panels securely.

This fan stirrer assembly is a direct-replacement air circulation component that helps move air inside the appliance cavity for more even temperature distribution and improved venting performance. Restores correct airflow when the original stirrer is worn or damaged. What it does:

• Circulates air to promote more even heating or cooling across the cavity
• Replaces cracked, broken, or missing stirrer blades that reduce airflow
• Helps reduce hot/cold spots and poor cooking or cooling performance
• Can eliminate unusual noises caused by a damaged or unbalanced stirrer

• Disconnect power to the appliance before starting any repair
• Remove access panels or interior liners as required to reach the existing stirrer
• Handle the plastic blades carefully to avoid damage; ensure proper alignment and secure mounting hardware
• Test appliance operation after installation and reassemble panels per OEM guidance