Psa91205f4ss Parts

A temperature sensor assembly that monitors internal temperatures and sends readings to the appliance control so the unit can maintain proper heating or cooling. Replacing a failed sensor restores accurate temperature regulation and consistent performance. What it does

• Detects and reports temperature to the electronic control or thermostat
• Helps the appliance maintain set temperatures for consistent operation
• A faulty sensor can cause inaccurate temperature readings or uneven heating/cooling
• May trigger temperature-related error codes or put the unit into a diagnostic/fail-safe mode

• Disconnect power to the appliance before attempting any repair
• Handle the sensor and its wiring gently; avoid bending or damaging the sensing tip or connectors
• Reconnect wiring securely and confirm correct routing to prevent interference with moving parts

This replacement blower fan mounts on the blower motor to move air through the appliance's ventilation path and cool internal components. It restores proper airflow to help clear steam/smoke and reduce noise from a cracked or warped wheel. What it does:

• Couples to the blower motor to push/pull air through the exhaust or recirculation ducts
• Helps cool internal parts while venting cooking steam and odors
• Typical failure signs: scraping/rattling noises, reduced or no airflow, poor venting performance, or intermittent overheating shutdown

• 1 blower fan wheel

• Disconnect power at the breaker or unplug before servicing
• If over-the-range or built-in, support the unit and follow manufacturer procedures to access the blower housing
• Match the original wheel orientation and seat fully onto the motor shaft
• Spin by hand to ensure free rotation and clearance; reassemble and test all fan speeds

This Miraclon heater is a direct-replacement heating element assembly that restores proper heat generation in compatible appliances. It provides reliable, OEM-matching heating performance to help your appliance reach and maintain operating temperatures. What it does

• Replaces the appliance's failed internal heater assembly to restore heat production.
• Heats quickly and evenly to support cooking, drying, or defrosting cycles (depending on appliance).
• Common symptom: no heat or weak heat during normal operation.
• Common symptom: appliance runs but items fail to warm or dry as expected.

• Disconnect power and gas before starting any repair.
• Handle the heater carefully; avoid bending or damaging terminals and mounting tabs.
• Follow the appliance service manual for access, mounting, and wiring instructions.

Electronic main control board that manages core refrigerator functions and the user interface. Installing this replacement restores control of compressor, fans and diagnostics when a failed board causes power, cooling, or display issues. What it does:

• Regulates compressor and fan operation — symptoms: refrigerator not cooling, runs continuously, or cycles erratically.
• Manages user controls and display signals — symptoms: unresponsive buttons, blank or erratic display, or control panel errors.
• Controls defrost timing and related outputs — symptoms: frost buildup, excessive ice, or inconsistent temperatures.
• Communicates with sensors and other modules to coordinate normal operation — symptoms: intermittent operation or fault codes.

• Always disconnect power to the appliance before servicing to avoid shock or damage.
• Handle the board by the edges and avoid static discharge; use a grounded wrist strap if available.
• The part number on the original board matches WB27X35345 before installing.

This ring assembly replaces a worn or damaged trim ring to restore proper fit and finish on your appliance. It helps secure surrounding components and reduces vibration or misalignment for smoother operation. What it does

• Acts as the trim/mounting ring that holds or aligns adjoining parts in place
• Restores proper fit and reduces rattling or loose gaps around the opening
• Helps prevent misalignment-related wear on adjacent components
• Common symptom: visible gap, loose trim, or vibration/noise during operation

• One ring assembly

• Disconnect power to the appliance before starting any repair
• Use basic hand tools; refer to the appliance's parts diagram for exact placement
• Handle mounting surfaces and adjacent trim carefully to avoid scratching or bending
• Reinstall components in reverse order and verify proper fit before restoring power

Turntable shaft that connects the microwave motor to the glass tray so the turntable rotates smoothly for more even heating. Replacing a worn or broken shaft helps stop wobbling, slipping, or scraping during rotation. What it does:

• Transfers rotation from the motor to the glass turntable so dishes rotate while cooking.
• Centers and supports the glass tray to reduce wobble and ensure consistent rotation.
• Use when the tray won't turn, slips on the motor coupler, or makes knocking/scraping noises.
• Fits into the turntable coupler and works with the roller ring and glass tray to maintain stable motion.

• 1 turntable shaft

• Disconnect power before servicing and remove the glass tray and roller ring to access the shaft.
• Shaft typically presses into the motor coupler; remove the old shaft and press the replacement into place.
• Inspect the roller ring and glass tray for damage when replacing the shaft; replace any worn pieces for best results.

This auxiliary cooktop holder is a replacement support bracket that helps keep the cooktop or burner assembly aligned and secure for stable, rattle-free operation. Restores proper positioning of components after wear or damage. What it does

• Supports and anchors the cooktop/burner assembly to prevent shifting during use
• Keeps burner and trim pieces aligned for even surface contact and safe operation
• Reduces rattling, vibration, and gaps between cooktop components
• Helps restore secure mounting after broken or worn original brackets

• Disconnect power (and gas, if applicable) before starting any repair
• Use proper hand tools; part secures with fasteners—retain and reinstall all screws
• Watch for sharp sheet-metal edges and wear safety gloves and eye protection

This AC fan motor is the refrigerator fan motor that circulates air to maintain proper cooling and airflow. It replaces a worn or failed fan motor to help restore steady airflow and consistent temperatures. What it does:

• Spins the evaporator/condenser fan blade to move air through the refrigerator cooling system
• Restores airflow when fan has stopped running or runs intermittently
• Reduces unusual fan noise or vibration caused by a failing motor
• Helps correct uneven cooling or frost build-up linked to poor air circulation

• Disconnect power to the appliance before starting any work
• Handle the fan blades carefully to avoid bending or injury
• Verify fan blade seating and clearances during reassembly to prevent rubbing

This replacement control knob restores a secure, accurate feel when selecting settings on your appliance. Swap in a new knob to fix cracked, stripped, or missing originals so you can turn the control reliably and keep daily cooking on track.

• Engages the control shaft so you can select heat or function as intended
• Common symptoms: knob spins freely, falls off, feels wobbly, or won't turn the control
• Restores proper indexing with panel markings for predictable operation
• Freshens the look of a worn or damaged control area

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Pull the old knob straight off the shaft—avoid prying against the control panel
• Align the new knob with the flat/key on the shaft and press firmly until fully seated
• Verify smooth rotation and correct pointer alignment after installation

This circulation motor powers air movement inside the appliance to maintain proper airflow and even temperatures. Replacing a failed motor restores circulation for more consistent cooling and reduces noise or performance issues. What it does:

• Spins the fan to circulate air through the cooling/ventilation path
• Helps maintain even temperatures and proper airflow in the appliance
• Commonly replaced when airflow is weak, cooling is uneven, or the motor is noisy
• Stops operation if the motor fails, which can lead to frost buildup or reduced performance

• Disconnect power to the appliance before starting any repair
• Access and mounting steps vary by model; follow the appliance's service manual or wiring diagram
• Handle wiring connectors carefully and confirm proper fan rotation before reassembly

This nut assembly secures an appliance component to its mounting point, restoring a solid connection and preventing unwanted movement. Replace a damaged or missing nut to stop rattling and keep parts aligned for reliable operation. What it does:

• Fastens a panel, bracket or component to its mounting stud or bolt to maintain proper alignment.
• Restores a secure connection when the original nut is stripped, corroded or missing.
• Helps stop rattling, looseness or parts that won't stay in place.
• Works as a direct replacement to restore proper fit and function.

• Disconnect power (and water if applicable) before beginning any repair.
• Use the correct-size socket or wrench; avoid cross-threading when installing.
• Tighten snugly but do not overtighten — replace mating hardware if threads are damaged.

Replacement mounting bracket that secures internal panels or components to the appliance frame, restoring alignment and stability. Use this bracket to replace cracked, bent, or missing supports that cause vibration or loose parts. What it does:

• Supports and secures panels, trim, or internal assemblies to keep components properly aligned.
• Reduces rattling, sagging, or movement caused by a broken or missing bracket.
• Restores stable mounting after impact, wear, or stripped mounting points.
• Helps maintain proper fit and operation of adjacent parts by providing a solid attachment point.

• Disconnect power (and water/gas if applicable) before starting any repair.
• Basic hand tools required; remove adjacent panels or trim for access as needed.
• Retain original fasteners when possible; replace damaged clips or screws.

This is a truss-head self-tapping screw used to secure appliance panels and trim. It replaces a lost or damaged mounting screw to restore proper fit and stop rattles or loose parts. What it does

• Secures trim, panels, brackets or small components where a low-profile, wide-head screw is required
• Self-tapping design cuts threads into sheet metal or similar substrates—no nut required
• Restores tight mounting to reduce vibration, rattling or misaligned panels
• Commonly used in refrigerators, ranges and other household appliances

• One truss-head self-tapping screw

• Disconnect power to the appliance before servicing and work on a cool appliance
• Use the correct screwdriver or bit to avoid stripping the head
• Do not overtighten—turn until snug and the part is secure but not distorted
• Replace with the exact part number to ensure fit and function

This heater sheath is the protective metal sleeve that surrounds a dryer/oven heating element, helping protect the element and focus heat where needed for reliable appliance heating performance. What it does:

• Protects and supports the heating element inside the appliance
• Helps direct and contain heat for efficient operation
• Can prevent direct contact between the element and surrounding components
• Commonly replaced when the sheath is corroded, dented, or damaged
• Linked to uneven heating or visible element damage

• High-level replacement only; disconnect power before servicing to avoid shock hazard
• Inspect surrounding components (element, terminals, mounting clips) and replace any damaged parts
• Use proper fasteners and ensure sheath is seated securely to avoid contact with other components

This tapping pan-head screw secures interior panels and components in appliances, providing a low-profile head and threads that form into metal for a firm hold. It's a direct-fit fastener for repairs and replacements. What it does

• Fastens panels, brackets and small appliance components where a self-tapping screw is required
• Pan-head profile gives a flush, low-profile finish that resists snagging
• Threads cut into mating metal to create a secure attachment without a nut
• Commonly used where sheet-metal or thin-frame fastening is needed

• One tapping pan-head screw

• Use the correct screwdriver bit that matches the screw recess to avoid stripping
• Start in a pilot hole or with light initial pressure to ensure proper thread formation
• Tighten until snug; do not over-torque — overtightening can strip threads or deform panels
• Wear eye protection when working with metal fasteners and sheet metal