Psc25ngsa Parts

This water tube fastener secures the refrigerator's water tube/line to the cabinet or chassis, keeping the tubing routed and stable to prevent kinks and inconsistent water flow. Simple replacement helps restore proper line routing and reduces vibration noise. What it does:

• Holds the water inlet/dispenser tube in place to prevent movement and rubbing
• Keeps tubing routed away from sharp edges and hot components
• Helps prevent kinks that can restrict water flow to the dispenser/ice maker
• Reduces vibration-related noise from loose tubing

• Disconnect power and shut off the water supply before replacing any water-line hardware.
• Remove any access panels needed to reach the existing clip; use hand tools to unclip or remove fastener.
• Check for leaks and secure routing after installation.

The MWF Bypass is an OEM replacement part for GE refrigerators. Located within the bottom freezer compartment, the metal water filter bypass fitted assembly is responsible for directing filtered or unfiltered water flow to the ice maker and dispenser.

Causes for replacement may include faulty diverter components obstructing water flow to selections or resulting in water leaks.

Symptoms of a problematic bypass unit include:

• Inability to select filtered or unfiltered water from the dispenser
• Ice maker failure due to lack of water or poor water quality
• Mineral deposits accumulating on internal parts from unfiltered water

This OEM replacement bypass is compatible with GE, Hotpoint, and Profile model refrigerators.

The R134 Drier is an OEM part for GE refrigerators. This component plays a critical role in the refrigeration system by removing moisture and contaminants from the refrigerant, ensuring efficient cooling and preventing damage to other parts of the system. It helps maintain the purity and effectiveness of the refrigerant as it cycles through the system.

You should replace the R134 drier if it becomes clogged or damaged. Common causes of a bad drier include wear and tear over time, exposure to moisture, or contamination from other failing components in the refrigeration system.

Symptoms of a bad R134 drier include:

• Reduced cooling efficiency
• Frost buildup on the evaporator coils
• Unusual noises from the refrigeration system
• Increased energy consumption
• Refrigerator not maintaining the set temperature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This self-adhesive foam strip provides a flexible seal and buffer for appliance gaps, helping reduce drafts, rattling, and moisture intrusion. Designed for easy stick-on replacement where foam padding or sealing is needed. What it does

• Seals small gaps between components to help reduce air leaks and temperature loss
• Cushions panels and doors to minimize noise and vibration
• Helps block moisture and dust from entering sensitive areas
• Self-adhesive backing allows for quick placement without extra glue

• One self-adhesive foam strip

• Surface must be clean and dry; wipe with isopropyl alcohol for best adhesion
• Measure and trim the foam strip to fit—use scissors or a utility knife
• Press firmly along the length to ensure full contact; allow adhesive to set before closing doors or panels
• For safety, disconnect power to the appliance before working in internal areas

This AHU Chill seal is a replacement gasket designed to help maintain proper temperature control and airflow in the chilled compartment. It restores a tight seal to reduce warm-air leaks and help the appliance run more efficiently. What it does:

• Replaces a worn or damaged chill compartment gasket to restore an airtight seal
• Reduces warm air infiltration that can cause frosting or inconsistent temperatures
• Helps the cooling system maintain set temperatures and reduces run time caused by leaks
• Fits where the AHU/chill compartment requires a dedicated perimeter seal

• One AHU Chill seal (gasket) as shown

• Remove old gasket and clean mating surfaces before installing the new seal
• Press the gasket into the channel evenly; avoid stretching or twisting the seal
• Check the seal for uniform contact and adjust as needed; replace damaged retainers if present

This fixed freezer module shelf provides a secure mounting surface for the freezer control/module assembly, keeping electronics and components stable for reliable operation. Designed as a direct replacement for damaged or missing shelves. What it does

• Secures the freezer control/module assembly to prevent shifting or vibration
• Provides a stable platform to maintain correct component placement
• Prevents contact between module components and other internal parts
• Commonly replaced when the shelf is cracked, broken, or the module feels loose

• Disconnect power to the appliance before beginning any repair
• Handle plastic parts carefully to avoid cracking; use basic hand tools
• Confirm correct orientation and seating of the shelf before reassembling panels

This ice guide directs ice from the ice maker into the bin or dispenser, reducing jams and misfeeds for smoother ice delivery. Durable molded plastic fits into the ice path to keep cubes aligned as they drop. What it does

• Guides ice from the ice maker to the storage bin or dispenser chute
• Helps prevent cubes from getting stuck or misdirected during harvest
• Maintains a clear path to reduce clumping and improve dispensing consistency
• Replaces a cracked, broken, or missing plastic guide

• One ice guide

• Disconnect power to the appliance before starting any work
• Remove the ice bin or access panels as needed for clear access
• Usually installs by snapping into place or securing with the existing fastener(s); do not force parts

This left-side slide and bracket assembly supports a refrigerator shelf or drawer slide, restoring smooth, stable movement and proper alignment. It replaces a damaged or worn left slide bracket to help drawers and shelves operate correctly. What it does:

• Provides a mounting point and sliding track for a left-side shelf or drawer
• Restores smooth in-and-out motion when the original bracket is cracked, bent, or broken
• Prevents shelf or drawer from sagging, catching, or becoming misaligned
• Works with the matching right-side slide/bracket to ensure balanced operation

• Basic hand tools may be needed; follow manufacturer instructions for safe removal and replacement
• Power down and empty the shelf/drawer before starting to avoid injury or damage
• Inspect mating hardware and the matching right-side bracket for wear and replace both if needed to ensure proper alignment