Psh6pgzbess Parts

This lower front trim piece attaches to the refrigerator base to cover and protect the grille area while keeping the appliance's front panel looking finished. It restores appearance and helps keep debris away from vents and components. What it does:

• Covers the lower front grille opening for a finished, OEM appearance
• Protects underlying vents and components from dust and accidental contact
• Helps direct airflow around the condenser/vent area for proper operation
• Replaces damaged, cracked, or missing trim to improve aesthetics

• One grille recess lower front trim

• Disconnect power to the refrigerator before attempting installation
• Typically secures with snap tabs and/or screws; align tabs and press or fasten as required
• Handle carefully to avoid scratching the finish and to prevent breakage of plastic tabs
• Obtain OEM replacements for secure installation

This silicon controlled rectifier (SCR) is an electronic switching device used to control power to oven/stove heating circuits, helping the appliance regulate temperature and heat output for cooking performance. What it does:

• Switches and regulates AC power to heating elements for controlled heat
• Enables cycle-based or phase-controlled heating used by oven/range controls
• Common replacement when an element won't heat consistently or unit won't maintain temperature
• Helps stop erratic heating caused by a failed power control component

• Disconnect power to the appliance before inspecting or replacing the SCR
• Observe ESD precautions and handle the component by insulated edges

This hinge top and pin assembly secures the refrigerator/freezer door to the cabinet and provides a stable pivot for smooth opening and closing. It helps keep the door aligned and prevents sagging or uneven gaps. What it does:

• Replaces a worn or broken hinge top and pivot pin that allow the door to pivot
• Restores proper door alignment and sealing when the hinge is the cause of sagging
• Stops noisy or sticky door movement caused by a damaged hinge top or pin
• Helps prevent further wear to the door and cabinet by restoring correct pivoting

• One hinge top and pivot pin assembly

• Support the door securely before removing the hinge to prevent injury or damage
• Disconnect power to appliances with electrical components before working near them
• Tighten mounting fasteners to manufacturer torque recommendations; do not overtighten

This auger helix is the rotating spiral that moves ice from the freezer bin to the dispenser chute, restoring reliable ice delivery when the auger is worn, broken, or missing. Designed to match OEM fit and function. What it does:

• Translates motor rotation into axial movement to push ice through the dispenser chute
• Restores consistent ice flow when previous helix was stripped, cracked, or bent
• Reduces jamming and grinding caused by damaged or worn flights
• Works with the dispenser auger assembly to ensure measured ice delivery

• One auger helix

• Disconnect power to the appliance before servicing to avoid injury
• Remove the ice bin and dispenser auger housing per manufacturer instructions
• Inspect mating components and replace if damaged
• Do not force fit; align helix and test dispenser operation before reassembling

This slide and bracket assembly replaces a worn or broken refrigerator drawer slide to restore smooth opening and secure drawer support. Designed to align and guide the drawer while preventing sagging or binding. What it does:

• Replaces the drawer slide and mounting bracket so the drawer glides correctly
• Supports the weight of the drawer and its contents to prevent sagging
• Helps stop sticking, rough movement, or misalignment when opening/closing the drawer
• Restores proper drawer tracking for full insertion and removal

• One slide and bracket assembly

• Intended for refrigerator drawer application; verify fit against your OEM part number before ordering
• Basic hand tools required; follow manufacturer's service manual for access and removal steps
• Disconnect power or unplug the appliance if accessing electrical components nearby
• If fasteners or clips are damaged, replace them with OEM-specified hardware

This light reflector directs and protects the appliance lamp, improving illumination and preventing direct bulb contact. It restores proper light focus so interior areas are evenly lit and bulbs remain securely positioned. What it does:

• Reflects and directs light from the lamp for better interior visibility
• Shields the bulb from contact with food or components
• Helps maintain consistent light output and coverage
• Commonly replaced when light appears dim, uneven, or the reflector is cracked or missing

• Disconnect power to the appliance before servicing to avoid electric shock
• Remove the bulb before installing the reflector; handle bulbs and reflector with care to avoid damage
• Use only compatible replacement parts and follow the appliance manufacturer's instructions

This bottom hinge and pin assembly secures and supports the lower refrigerator/freezer door, allowing smooth pivoting and proper alignment for reliable opening and closing. It replaces a worn or bent hinge to restore door stability. What it does:

• Provides a stable pivot point for the lower door to ensure correct alignment and smooth operation
• Helps prevent door sagging, rubbing, or misalignment that can cause poor sealing or uneven gaps
• Fits the lower hinge location and transfers door weight to the cabinet frame
• Works with existing hinge housing and mounting points to restore factory movement

• Turn off power to the appliance and remove all items from the door before starting
• Support the door securely while removing and installing the hinge to avoid injury or damage
• Use appropriate hand tools; tighten fasteners to secure but avoid over-torquing

This front-chill seal is the replacement gasket that seals the refrigerator's front chill/drawer area to help maintain proper temperature and reduce moisture intrusion. Restores a tighter seal to improve cooling performance in the drawer area. What it does

• Replaces worn, torn or compressed front chill/drawer gasket that lets cold air escape
• Helps maintain even temperature in the chill/deli drawer and reduce frost buildup
• Reduces moisture and odor transfer between compartments caused by a failing seal
• Common symptom: drawer not staying cold or visible gaps around the drawer edge

• Designed for a direct-fit replacement; remove the drawer or access panel as needed to reach the gasket
• Clean the mounting flange and channel before installing the new seal for best adhesion/seating
• Seat the gasket evenly into the channel; use gentle, even pressure to avoid distortion
• Disconnect power before removing panels or working near refrigeration components

This replacement freezer wire basket restores organized storage and easy access to frozen foods. It snaps into existing shelf supports to keep loose items contained and make loading and unloading simpler. What it does:

• Holds and contains frozen foods and packaged items to prevent shifting
• Restores usable storage space when the original basket is broken or missing
• Keeps small or loose items grouped for easier access
• Helps maintain an orderly freezer so items are easier to find

• Install on the appropriate shelf supports or rails; verify correct orientation before seating
• No special tools typically required; lift and engage the basket into place
• Handle carefully to avoid bending the wire or damaging adjacent components

This light bezel is the trim piece that surrounds and secures the refrigerator/freezer interior lamp, providing a finished appearance and helping keep the lamp in place. It restores a clean fit and prevents light lens movement. What it does:

• Holds the interior lamp assembly or lens in position and covers the lamp opening
• Replaces cracked, broken, or warped trim that lets the lens rattle or sit unevenly
• Helps maintain a sealed appearance around the lamp to reduce light glare and gaps
• Compatible with appliances that use the matching OEM bezel design

• Disconnect power to the appliance before starting any work to avoid shock
• Handle the bezel and lamp lens carefully to avoid cracking; use appropriate tools for retaining clips or screws
• If replacing the lamp or lens, confirm bulb type separately
• Reassemble in reverse order and test the lamp for proper fit and operation after installation

This silicon controlled rectifier (SCR) is a replacement control semiconductor that helps regulate power to heating elements and motors, restoring proper cycle control and heat delivery in compatible appliances. What it does:

• Controls and chops AC power to heating elements or motor circuits for variable heat/speed control
• Can stop intermittent or no-heat conditions caused by a failed SCR in oven, range, or similar appliances
• Helps restore stable thermostat/regulation behavior when the original SCR is not switching correctly
• Commonly used where precise power control is required in the appliance's control board or module

• One silicon controlled rectifier (SCR) as shown

• High-level, service-only replacement — disconnect power before starting work
• Verify correct part number on the appliance and transfer heat sinks or mounting hardware if required
• Use proper ESD precautions when handling semiconductor components

This left-hand chill pan linkage connects and supports the refrigerator's chill-pan assembly so the drawer and cooling components move smoothly. Replaces a worn or broken linkage to restore proper drawer alignment and operation. What it does:

• Couples the chill pan/drawer to the cabinet frame so the drawer opens and closes evenly
• Maintains correct positioning for the chill pan to help full drawer travel
• Can resolve symptoms like a drawer that sticks, binds, or sits unevenly
• Helps prevent further wear on adjacent fasteners and guide components

• Designed for model-specific fit
• Use basic hand tools; supports straightforward replacement when access is available
• Disconnect power and empty the drawer area before beginning work to avoid injury
• Replace damaged mounting hardware or adjacent parts to ensure secure installation

This mullion duct gasket seals the vertical door/mullion area to help keep cold air inside the refrigerator and reduce condensation. It replaces a worn or damaged gasket to improve seal performance and reduce moisture buildup. What it does:

• Seals the mullion/duct area between doors to help maintain proper temperature and reduce warm air infiltration
• Helps prevent condensation and frost build-up along the door mullion
• Restores the door seal where gaps or deterioration allow air leaks
• Works with original mullion/duct trim to maintain proper airflow paths

• 1 mullion duct gasket

• Designed to fit into the mullion/duct channel; remove old gasket and press new gasket into place
• Handle gently to avoid stretching or tearing the gasket during installation
• Clean the mounting channel before installing to ensure a full contact seal
• Disconnect power or follow appliance safety guidelines before servicing doors/mullion area