Pxd22bypfs Parts

Reduces chlorine, lead, cysts, and pharmaceuticals for clean water and ice. Replace every 6 months or when filter light activates. Verify fit by model.

The Small Cube Ice Maker is an OEM component specifically designed for GE refrigerators. Responsible for automatically producing batches of fresh ice cubes on demand, this ice maker operates through freeze cycles that steadily deposit ice into the storage bin below. 

Causes of an underperforming ice maker include mineral buildup that disrupts the freezing process over time. Mechanical parts inside like the harvester can also experience normal wear.

Symptoms of a failing ice maker involve:

• Slow or reduced ice production 
• Ice cubes sticking together or fused sizes
• Empty bins despite the unit running
• Grinding or unusual noise during freeze cycles

Restore reliable ice provision with this genuine GE replacement. This OEM GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Replacement fastener for refrigerator door handles. Secures handle to door with durable metal construction. Needed when original is cracked or broken.

Replaces the water filter when filtration isn't needed, maintaining water flow to your ice maker and dispenser. Confirm fit with your model number.

Fixes weak water dispenser flow and no ice production. Controls water supply to your refrigerator's dispenser and ice maker. DIY-friendly repair.

Replace your cracked, loose, or missing bottom freezer drawer handle. Restores a sturdy grip and refreshes your refrigerator's appearance. Stainless steel.

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

Ice maker not working or freezer not cold enough? This ice box fan circulates air in the freezer for proper icemaking. Plugs in after removing cover.

This small return spring provides the tension needed for a lever, latch, or flap mechanism in select refrigerators, helping the component move smoothly and snap back to its correct resting position after use.

• Restores proper tension so the linked mechanism operates smoothly and returns to neutral
• Helps doors, latches, or levers close or engage consistently
• Typical failure signs: weak or missing spring force, parts that don't spring back, poor closure, or rattling
• Replacing a fatigued spring can improve feel and reliability of the mechanism

• Disconnect power; turn off the water supply if working near dispenser or ice components
• Note spring orientation and take reference photos before removal
• Use needle-nose pliers and control stored tension to avoid injury
• Inspect related clips, pins, or brackets and replace if worn

This set screw secures refrigerator components—most commonly door handles—to their mounting studs. Replacing a missing or stripped screw restores a solid, secure feel and helps prevent loose or wobbly handles.

• Locks the handle to its mounting stud to keep it tight and secure
• Helps resolve a loose, wobbly, sliding, or rattling handle
• Replaces a missing, rounded, or damaged set screw
• Helps maintain proper handle alignment and consistent door operation

• Unplug the appliance or switch off power before servicing
• Ensure the handle is fully seated on the studs before tightening
• Start the screw by hand to avoid cross-threading; then tighten until snug
• Do not overtighten to prevent stripping the screw or handle threads

Fix no water or ice dispensing issues with this dual water valve. Common when icemaker cycles but doesn't fill. DIY repair in under an hour.

The Stainless Drip Tray Cover is an OEM part for GE side by side refrigerators. It serves as the cover for the bottom drip tray in the refrigerator, allowing any spills or condensation to properly drain away while also keeping the drain area clean and hygienic. 

Causes of a bad drip tray cover can include wear and tear from repeated cleaning, damage from impact or excessive weight, or warping due to moisture. 

Symptoms of a bad drip tray cover include:

• Leaks or drips from the bottom of the refrigerator  
• An unpleasant musty smell 
• Accessible drainage area allowing for mildew or bacteria growth

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

LED light module that mounts near the vegetable pan in your refrigerator. Replace a cracked, broken, or non-functioning module to restore drawer lighting.

Frost buildup or icing in freezer? The defrost thermistor monitors temperature to control defrost cycles. Simple replacement when tested faulty.

Refrigerator not cooling or freezer too warm? This evaporator fan motor and gasket assembly restores airflow across the evaporator for proper cooling.

If your refrigerator dispenser won't dispense water or ice when pressed, this paddle assembly restores proper operation. Moderate DIY repair in 30-45 minutes.