Pye/G4500 Parts

Control board exposed or damaged? This PCB cover assembly shields electronics from dust and moisture, restoring protection for reliable operation.

Refrigerator plug button that installs in the cabinet or liner. Replace this insert if the original is cracked, broken, missing, or worn from use.

This center track guides and supports the fresh-food door drawer, helping the drawer slide smoothly and stay aligned for reliable access and seal. Replaces a worn or damaged center track to restore normal movement and alignment. What it does:

• Provides a stable sliding surface for the fresh-food drawer/door
• Restores smooth opening and closing when original track is worn or cracked
• Helps maintain proper door alignment to reduce gaps that can affect cooling
• Common symptom: drawer sticks, jams, or tilts during operation

• One center track for the fresh-food drawer/door

• Turn off power to the appliance before beginning any service
• Access usually requires removing the drawer/door assembly and fasteners; keep hardware organized
• Inspect companion tracks and rollers; replace any worn pieces to ensure smooth operation

This is a replacement M4 machine screw for securing appliance components and assemblies. It restores proper fit and prevents vibration or loose parts when a small mounting screw is missing or stripped. What it does

• Fastens small panels, brackets, or electronic modules in place
• Restores secure mounting to reduce rattles, vibration, or intermittent connections
• Replaces lost, worn, or stripped original fasteners
• Useful during control board or housing repairs where factory screws are removed

• One M4 x 1.59 machine screw, 10 mm length

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten snugly but do not overtighten; replace with exact screw size to ensure proper fit
• Keep small parts away from children and pets

This genuine replacement screw secures appliance panels and components where a short 8-18 x 1/2 in fastener is required, restoring proper fit and preventing rattles or loose parts. What it does:

• Secures panels, brackets, trim, and small components
• Restores tight fit where stripped or missing screws cause vibration or rattling
• Matches OEM thread and length for reliable fastening
• Prevents gaps that can trap dirt or interfere with operation

• One screw

• Use the correct Phillips screwdriver to avoid stripping the head
• Tighten until snug; avoid over-tightening which can strip threads or crack plastic
• Disconnect power and remove any panels as required before working near electrical components
• Replace only with the exact OEM screw to maintain proper fit

This silicon controlled rectifier (SCR) is a replacement power-switching semiconductor that helps control high-current flow to heating elements or motors, restoring proper power regulation and appliance function. What it does:

• Acts as a high-current electronic switch on appliance control circuits to regulate power to heating elements, motors, or similar loads
• Allows the control board to turn high-voltage circuits on and off with low-voltage signals
• Failure can cause no heat, intermittent heating, loss of power to a controlled component, or erratic operation
• Designed to handle repeated switching cycles under normal appliance operating conditions

• One silicon controlled rectifier module

• Disconnect all power before servicing to avoid shock or injury
• Handle as an electronic component; avoid static discharge and mechanical stress
• May require soldering or secure mounting to a heatsink or chassis—follow the appliance wiring diagram

This wheel overmold assembly replaces a worn front wheel to restore smooth drum rotation and reduce noise. It mounts to the dryer front support to help the drum roll evenly and prevent metal-on-metal wear. What it does:

• Provides a cushioned wheel surface that supports the dryer drum and improves rotation
• Reduces squeaking, scraping and grinding caused by a worn or damaged front wheel
• Helps maintain proper drum alignment for even tumbling and reduced wear on seals
• Extends the life of the front support by preventing direct metal contact

• Disconnect power before beginning repair to avoid electrical hazard
• Access the front support assembly per your dryer's service instructions; inspect adjacent rollers and glides for wear
• Fit the overmold onto the wheel hub and secure per OEM guidance; verify smooth drum rotation before reassembly
• If other support components show wear, replace them to prevent premature failure

This louver duct channels return air in the freezer to the ice maker area, helping maintain proper airflow for ice production and consistent freezer temperatures. A direct-fit replacement for the freezer ice maker return duct. What it does:

• Directs cold airflow from the freezer to the ice maker/ice bin area
• Helps prevent localized frost buildup by controlling air movement
• Supports consistent ice production and even freezer cooling
• Replaces cracked, broken or missing ducts that cause air leakage or noise

• One louver duct (ice maker return)

• Disconnect power to the appliance before servicing
• Remove freezer liner or access panels as needed to reach the duct
• Handle plastic components carefully to avoid cracking; use the OEM fasteners where required

A small rubber grommet that cushions and seals the freezer liner, helping reduce vibration and prevent wear where components meet the inner cabinet. Replaces a worn or missing grommet to restore a snug fit and quieter operation. What it does

• Cushions the freezer liner and components to reduce rattling and vibration.
• Helps maintain a tight seal at the liner mounting point to limit movement and wear.
• Prevents direct metal-to-metal contact that can cause chipping or cracking of the liner.
• Commonly replaced when the liner is loose, noisy, or damaged around mounting points.

• Designed for direct replacement; remove power before accessing the freezer interior.
• Access may require removing shelves, drawers, or the liner trim; handle liner edges carefully.
• Inspect surrounding clips and fasteners; replace any damaged hardware to ensure proper fit.

This ground harness is a factory-style wire assembly that provides a safe electrical return path to reduce shock and interference risks. It restores proper grounding for affected appliance circuits and helps maintain safe operation. What it does:

• Connects appliance metal chassis/components to the ground system to prevent stray voltage and reduce shock risk
• Provides the ground path for control boards and other electrical components to function correctly
• Common symptom: appliance shows electrical faults, intermittent operation, or visible arcing at connection points
• Used when original ground wire is damaged, corroded, or has a failed connector

• One ground harness (wire assembly) as pictured

• Always unplug the appliance or disconnect power at the breaker before starting work
• Match connector types and routing to the original harness; secure all fasteners and strain reliefs
• Inspect mounting points and mating terminals for corrosion; replace fasteners if damaged

Refrigerator warm but freezer cold? Your evaporator with heater may be frosted over or leaking. This part cools both compartments and prevents ice buildup.

Center mullion hinge for bottom-mount refrigerators. Mounts between refrigerator and freezer doors to support door alignment and closing. Replace if cracked or broken.

Replacement support brace that reinforces refrigerator door or trim assembly. Restores structural strength and prevents sagging or flexing of panels.

This support component helps freezer drawers or shelves slide smoothly in and out of the freezer compartment. Located inside the freezer on the side walls or bottom, replace it when drawers stick, won't slide properly, or have become loose and unstable.

Excess frost in freezer? This evaporator block seal prevents moist air from reaching cold components, reducing frost buildup and improving efficiency.