Ras233jq0 Parts

This bake element is the lower heating element inside the oven cavity. It supplies steady bottom heat during Bake cycles, helping the oven preheat properly and cook food evenly when the original element has failed.

• Provides the primary bottom heat during Bake mode
• Cycles with the oven control/thermostat to maintain set temperature
• Common failure symptoms: no heat in bake, very long preheat, uneven or undercooked results
• Visible damage may include blistering, cracks, or burned spots on the element sheath

• Disconnect power at the breaker and allow the oven to cool completely
• Remove racks; take out the element's mounting screws and gently pull the element forward to access the terminals
• Support and label wires; transfer them to the new element one at a time to avoid miswiring and prevent wires from slipping back
• Reinstall securely, restore power, and run a Bake test to verify operation

This is the range surface unit infinite switch for an 8-inch burner. It regulates power to the large surface element so you can set and maintain the desired heat level during cooking.

• Controls the temperature of an 8-inch surface (cooktop) element
• Replaces a switch that causes an 8-inch burner to be stuck on high, not heat, or only work intermittently
• Helps restore smooth, adjustable heat settings
• Designed for the large surface element circuit on compatible ranges

• Disconnect power before servicing; this is a high-voltage repair
• Note knob orientation and wire positions; take a photo for reference
• Transfer wires one at a time to the new switch to maintain correct connections
• Ensure the switch shaft and knob align properly before reassembly and testing

A 6" surface unit switch that controls the heat level of a compatible electric cooktop burner, restoring reliable temperature selection and burner response. Direct-fit replacement for ranges that use a 6-inch surface element control. What it does:

• Regulates power to a 6" surface heating element so you can set and change cooking temperature.
• Replaces a worn or failed infinite/surface switch that causes a burner to be stuck on, not heat, or not respond to control settings.
• Works with standard knob-style controls and factory wiring harnesses used on compatible electric ranges.
• Helps restore smooth, graduated temperature changes between settings.

• One 6" surface unit switch (as pictured)

• Disconnect power at the breaker or unplug the range before servicing to avoid electric shock.
• Mounting and panel removal may be required; use proper tools and avoid bending terminals.

This backsplash is the rear panel that fits behind a freestanding or slide-in range, restoring the appliance's finished appearance and protecting the wall from heat, grease, and splatter. It's a direct-replacement trim panel for worn or damaged backsplashes. What it does:

• Covers the rear area above the cooktop to block grease and splatter from reaching the wall
• Restores the appliance's original appearance when the original panel is dented, scratched, or corroded
• Helps maintain a cleaner cooking area by providing a smooth, easy-to-clean surface
• Works with existing control and vent openings when correctly matched to the range model

• One backsplash panel

• Turn off power to the range and allow all surfaces to cool before beginning installation
• Installation typically requires removing rear mounting screws and aligning the panel tabs into the cabinet/range slots
• Use proper fasteners and avoid overtightening to prevent panel distortion

This seal valve keeps the refrigerator water valve properly sealed to help prevent leaks and water damage. It restores a tight seal where the valve connects to the water line or manifold for reliable dispenser and icemaker operation. What it does:

• Replaces a worn or damaged valve seal to stop water leaks at the water valve connection.
• Helps restore proper water flow control to the dispenser and icemaker when leaks or drips occur.
• Commonly used when you notice water leaking beneath or behind the fridge, puddles under the valve area, or reduced dispenser/ice performance linked to a leak.
• Works as the sealing component between the water valve and its fittings or tubing.

• One seal valve (single replacement seal)

• Disconnect power and shut off the water supply before beginning repairs.
• The valve and fittings are dry, then remove the old seal and install the new seal in the correct orientation.
• Check all tubing and connectors for damage and replace if necessary to ensure a reliable seal.
• After installation, restore water and power, then test the dispenser/icemaker and inspect for leaks.

A replacement cover support base that secures the appliance's top/cabinet cover and helps keep the control area stable for reliable operation. Restores proper fit and reduces movement or rattling of the top cover assembly. What it does:

• Provides a mounting surface that holds and supports the top/cabinet cover
• Keeps the control/console area aligned to prevent sagging or misfit
• Helps stop vibration and rattling caused by a damaged or missing support
• Restores proper cover spacing to reduce gaps and improve appearance

• Disconnect power to the appliance before beginning any repair
• Basic hand tools typically required; remove top/cabinet cover or console to access mount
• Inspect surrounding clips and fasteners and replace any that are damaged

This 240V broil heating element restores high, direct heat for electric ovens so broiling works evenly again. It replaces a burned, broken, or weak broil element to bring back proper browning and searing performance. What it does:

• Heats the oven's broil zone to deliver intense, direct top heat for broiling and finishing dishes
• Replaces a visibly damaged, broken, or non-heating broil element
• Helps stop symptoms like no broil heat, uneven browning, or oven sparking at the top element
• Designed to match OEM fit and connections for straightforward replacement

• Disconnect power to the appliance at the breaker before starting any work.
• Handle the element carefully to avoid bending; wear gloves to protect hands from sharp edges.
• After installation, restore power and test broil function; stop and re-check wiring if arcing or unusual behavior occurs.

This range top is the flat cooktop surface that sits over the burner area, restoring a stable, finished surface and supporting burner components for safe, even cooking. It replaces a damaged or worn cooktop surface. What it does:

• Provides a stable mounting surface for burners and grates so cookware sits level
• Restores a sealed, finished cooktop area to prevent food and spills from entering the cabinet below
• Replaces warped, dented, rusted, or cosmetically damaged cooktop surfaces
• Helps correct uneven burner alignment or support issues caused by a damaged top

• One range top (cooktop surface)

• Disconnect power (electric) or turn off gas supply and ensure appliance is cool before starting
• Handle carefully to avoid scratching the finished surface; two people may be needed for safe lifting
• Follow manufacturer instructions for removing burner elements, grates, and mounting hardware before installing the new top

This oven bottom panel provides the flat inner surface that supports cookware and protects oven components from spills and debris. It restores a clean, even cooking surface and helps contain drips for easier cleanup. What it does:

• Covers and protects the oven cavity floor and underlying components from food spills and debris
• Provides a stable surface for pans and baking sheets to sit on during cooking
• Helps prevent direct access of drips to lower heating elements
• Can reduce smoke from burned-on spills by replacing a warped or damaged bottom

• One oven bottom panel

• Disconnect power to the appliance before starting work
• Remove oven racks and any broiler drawer or lower panel as needed to access mounting screws
• Use caution—edges may be sharp; wear gloves and eye protection
• Reinstall all removed parts and test the oven on a low setting to verify proper fit and operation